If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
ACER Monitor Colour Profiles
Can anyone tell me how to find the ICC or ICM colour profile for my new
Acer AL1951 LCD monitor that I need to calibrate for use with Photoshop. Acer tell me they do not give out these details to members of the public, why I don't know. I also need the gamma, white spot and phospher settings. |
#2
|
|||
|
|||
ACER Monitor Colour Profiles
"huckleberry" wrote in message
ups.com... Can anyone tell me how to find the ICC or ICM colour profile for my new Acer AL1951 LCD monitor that I need to calibrate for use with Photoshop. Acer tell me they do not give out these details to members of the public, why I don't know. I also need the gamma, white spot and phospher settings. Hi I think you will need to Calibrate and profile your new Display with a hardware device such as Spyder or Eye-one. These do not need the manufacturers profile, and will create a profile for you. Your post read as if you had been going to Calibrate with Adobe Gamma, and that does not work with Flat Panels. Roy G |
#3
|
|||
|
|||
ACER Monitor Colour Profiles
Can anyone tell me how to find the ICC or ICM colour profile for my new Acer AL1951 LCD monitor that I need to calibrate for use with Photoshop. Acer tell me they do not give out these details to members of the public, why I don't know. I also need the gamma, white spot and phospher settings. Acer provide ICC profiles for many of their monitors (though I couldn't quickly find the 1951) from their corporate ftp support sites! I do not therefore understand the response you were given. ************************************************** ****** Professor Peter R Hobson School of Engineering & Design Brunel University, Uxbridge UB8 3PH G.B. |
#4
|
|||
|
|||
ACER Monitor Colour Profiles
Thanks for that but why do you say Adobe Gamma doesn't work with flat
screens? |
#5
|
|||
|
|||
ACER Monitor Colour Profiles
"huckleberry" wrote in message
ups.com... Thanks for that but why do you say Adobe Gamma doesn't work with flat screens? Hi. Don't know why, it just doesn't. I still use CRTs Roy G |
#6
|
|||
|
|||
ACER Monitor Colour Profiles
"Peter R Hobson" wrote in message
... Can anyone tell me how to find the ICC or ICM colour profile for my new Acer AL1951 LCD monitor that I need to calibrate for use with Photoshop. Acer tell me they do not give out these details to members of the public, why I don't know. I also need the gamma, white spot and phospher settings. Acer provide ICC profiles for many of their monitors (though I couldn't quickly find the 1951) from their corporate ftp support sites! I do not therefore understand the response you were given. ************************************************** ****** Professor Peter R Hobson School of Engineering & Design Brunel University, Uxbridge UB8 3PH G.B. Hi. Again don't know why, but I did read on an earlier posting that someone had just bought themselves an Eizo Flat Panel, then were told by Eizo that its settings were all locked, so it could not be calibrated by any means. If a Calibrate-able Display was needed, then they should have bought one from the dearer price range. Roy G |
#7
|
|||
|
|||
ACER Monitor Colour Profiles
"Roy G" wrote in message ... Again don't know why, but I did read on an earlier posting that someone had just bought themselves an Eizo Flat Panel, then were told by Eizo that its settings were all locked, so it could not be calibrated by any means. If a Calibrate-able Display was needed, then they should have bought one from the dearer price range. And I believe that report was quickly debunked or retracted. When I profile my Samsung 213T LCD display, using a Gretag Eye-1, there is no place in that procedure that requres me to touch the monitor settings. By *choice* I reduce the monitor brightness before the profiling process. But I don't touch the monitor controls during or any time after the profile is made. rafe b www.terrapinphoto.com |
#8
|
|||
|
|||
ACER Monitor Colour Profiles
Rafe B
are you happy with that particular monitor? regard Don from Down Under "rafe b" wrote in message t... "Roy G" wrote in message ... Again don't know why, but I did read on an earlier posting that someone had just bought themselves an Eizo Flat Panel, then were told by Eizo that its settings were all locked, so it could not be calibrated by any means. If a Calibrate-able Display was needed, then they should have bought one from the dearer price range. And I believe that report was quickly debunked or retracted. When I profile my Samsung 213T LCD display, using a Gretag Eye-1, there is no place in that procedure that requres me to touch the monitor settings. By *choice* I reduce the monitor brightness before the profiling process. But I don't touch the monitor controls during or any time after the profile is made. rafe b www.terrapinphoto.com |
#9
|
|||
|
|||
ACER Monitor Colour Profiles
On Sat, 18 Mar 2006 03:47:25 GMT, "Don"
wrote: [ samsung 213T LCD monitor] Rafe B are you happy with that particular monitor? Yes, quite. rafe b www.terrapinphoto.com |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Canon S9000 profiles | Graham Russell | Digital Photography | 12 | March 15th 05 12:58 AM |
Good custom printer profile: Cathy's profiles | Stacey | Digital Photography | 0 | March 2nd 05 08:08 AM |
looking for epson 2200 profiles with MIS ink on epson stock | Ken | Digital Photography | 0 | February 10th 05 04:13 PM |
Color profile (.ICM file) for Acer 1913 monitor and Windows 98 | [email protected] | Digital Photography | 5 | January 22nd 05 09:58 PM |
Setting up equipment - Colour Profiles | Norfolk and Goode | Digital Photography | 0 | January 3rd 05 10:31 AM |