LENTAR slide duplicator mount needed

Hi

I have a Lentar Slide Duplicator and need an adapter to allow it to fit
my Olympus OM-2.

Any help on where I can get one or know of someone who has one would be
greatly appreciated.

Thanks

Steve

In article .com,
writes
Hi

I have a Lentar Slide Duplicator and need an adapter to allow it to fit
my Olympus OM-2.

Any help on where I can get one or know of someone who has one would be
greatly appreciated.

Thanks

Steve

Don't know the particular product but it is a strong possibility it uses
a T2 mount adapter. If you search you can probably find the details of
T2 width/thread and check it yourself. If so, then adapters should be
easy to come by. In the UK, SRB do almost anything in this line you
could wish for; don't know where you are so you'll have to do a search.

David
--
David Littlewood

David Littlewood writes:

In article .com,
writes
Hi

I have a Lentar Slide Duplicator and need an adapter to allow it to fit
my Olympus OM-2.

Any help on where I can get one or know of someone who has one would be
greatly appreciated.

Thanks

Steve

Don't know the particular product but it is a strong possibility it
uses a T2 mount adapter. If you search you can probably find the
details of T2 width/thread and check it yourself.

42mm diameter, pitch 0.75mm. The classic M42 Pentax/Praktica mount is
42x1.0, with a different register distance.

http://www.graphics.cornell.edu/~westin/misc/mounts-alphabetical.html
http://www.a1.nl/phomepag/markerink/mounts.htm

If so, then adapters
should be easy to come by. In the UK, SRB do almost anything in this
line you could wish for; don't know where you are so you'll have to do
a search.

--
-Stephen H. Westin
Any information or opinions in this message are mine: they do not
represent the position of Cornell University or any of its sponsors.

In article ,
writes
David Littlewood writes:

In article .com,
writes
Hi

I have a Lentar Slide Duplicator and need an adapter to allow it to fit
my Olympus OM-2.

Any help on where I can get one or know of someone who has one would be
greatly appreciated.

Thanks

Steve

Don't know the particular product but it is a strong possibility it
uses a T2 mount adapter. If you search you can probably find the
details of T2 width/thread and check it yourself.

42mm diameter, pitch 0.75mm. The classic M42 Pentax/Praktica mount is
42x1.0, with a different register distance.

http://www.graphics.cornell.edu/~westin/misc/mounts-alphabetical.html
http://www.a1.nl/phomepag/markerink/mounts.htm

If so, then adapters
should be easy to come by. In the UK, SRB do almost anything in this
line you could wish for; don't know where you are so you'll have to do
a search.

Stephen,

Thanks for this, very useful. I was resisting the temptation to do the
OP's research for him...

David
--
David Littlewood