If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Lysol Toilet Bowl Cleaner works great on color developer racks, too.
Clorox should be avoided and never ever mix Clorox with anything acid unless you have a gas mask (like fixer, stop bath or Lysol Toilet Bowl Cleaner!!)!! Clorox also damages stainless steel, the tanks will need to be re-passivated if you use it, so it's altogether a bad idea unless you're going after algae/bio-slime in wash tanks. You used to be able to buy ready mixed tray cleaners with dichromates but I believe the dichromates are now considered HazMat and carcinogenic. In my limited experience the stuff would bleach trays white but the trays stained when put back in contact with developers. I'd try something else first. -- darkroommike ---------- "McLeod" wrote in message ... On Sat, 20 Nov 2004 22:32:49 -0200, "Marvin Culpepper" wrote: I bought a used black and white paper processor when I removed the racks I found that fixer and deverlper had been left in the unit. The fixer broke up and came out in cakes. The developer is about a 1/4" thick in the bottom of the tank and very hard to scrape out. Any one out there know what I can use to dislove the developer so I can get it out. Someone said vinegar might work. I have not tried that yet. If you know of something you can email me at Lysol toilet bowl cleaner. Make sure you use it in a well ventilated area with a respirator because it will give off fumes. |
#12
|
|||
|
|||
I use hydrochloric acid (actually, the commercial "Muriatic Acid"), often used
for cleaning brick and masonry surfaces. It works like a charm. Follow the recommendations for use on the container. Pete Schermerhorn, in the glorious Berkshire hills of western Massachusetts Remove nojunk. |
#13
|
|||
|
|||
I use hydrochloric acid (actually, the commercial "Muriatic Acid"), often used
for cleaning brick and masonry surfaces. It works like a charm. Follow the recommendations for use on the container. Pete Schermerhorn, in the glorious Berkshire hills of western Massachusetts Remove nojunk. |
#14
|
|||
|
|||
I use hydrochloric acid (actually, the commercial "Muriatic Acid"), often used
for cleaning brick and masonry surfaces. It works like a charm. Follow the recommendations for use on the container. Pete Schermerhorn, in the glorious Berkshire hills of western Massachusetts Remove nojunk. |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
sheet film developing is hard | Largformat | Large Format Photography Equipment | 56 | October 17th 04 06:06 AM |
Base colour of cross processed film? Fuji RAP/Astia 100 | Nick Zentena | In The Darkroom | 28 | July 14th 04 05:39 AM |
Help for D-85 LITH Developer and FX-37 developer. | PG | In The Darkroom | 10 | June 16th 04 11:02 AM |
pyro plus paper developer | fnovau | In The Darkroom | 5 | May 23rd 04 04:28 AM |
D76 developer question | Goor | In The Darkroom | 6 | March 9th 04 10:23 PM |