If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#23
|
|||
|
|||
Jobo ATL-2300 chemical pumping error
Thanks Ralf
It will not be necessary as I have now fixed the fault having spoken to a very helpful lady on the JOBO Analogue Support desk in Germany. The fix is as follows Connect machine to power, but leave switched off. Press Enter, Start and Power on buttons simultaneously. This brings up the Service Menu on which there are a great many things - 14 items I think. Scroll down to No 11- Fill sensor. Press Enter, then toggle using up or down arrow to change from With to W/O. Press Enter. Press Power Off button. Repair Complete!!!! I have just run a test with same conditions as last night and the machine pumped all chemicals in all bottles through with no errors. It does mean that I have to fill with correct volume of chemicals for each run. However this was part of my routine anyway in order to conserve E6 chemicals. For those with ATL2X00 machines, this Service menu could be the place to start when things go wrong. I shall look there first in preference to experiencing similar hassle to yesterdays palaver. I only hope that I haven't written this in haste! Baxter |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Kodak LS443 Camera Error E45 | [email protected] | Digital Photography | 1 | January 30th 06 04:02 PM |
Road ruts with Jobo | Brian Kosoff | In The Darkroom | 64 | January 27th 04 12:08 AM |