If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Efke P100 5x4 and LC 29
Due to the demise of Agfa as a supplier here in Australia I have had to
consider different developers for my film stock. Normally I process my film in Refinal but that supply has dissappeared over night. I decided to go with those that would hopefully remain available so chose Ilford LC29. The film is Efke P100 5x4. The zone one speed was correct at 80 iso with a density of .1 above fog. I initially used a development time of 7 minutes at 22c. I used a dilution of 1:35 for this test. My first zone 8 at the 80iso gave me a density of 1.63 so I decided to up the dilution to 1:50 and keep the time at 7 minutes. This sheet was 1.20 and that was my target density for my condensor [D2 Omega] I shot a test scene to check in real life and the result is very smooth tonality. Jobo rotary processor Efke 100 5x4 1 minute prewash Ilford LC29 1:50 22c 7 minutes 1 minute water stop Fix and wash __________________ Steve |
Thread Tools | |
Display Modes | |
|
|