A Photography forum. PhotoBanter.com

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PhotoBanter.com forum » Digital Photography » Digital SLR Cameras
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

DxO Pro Optics & Teleconverters



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old January 31st 17, 11:24 PM posted to rec.photo.digital.slr-systems,rec.photo.digital
me[_5_]
external usenet poster
 
Posts: 502
Default DxO Pro Optics & Teleconverters

I just thought I'd pass along my tip to be able use supported
camera/lens modules as a starting point while using a teleconverter as
well. DxO Pro Optics uses several of exif parameters to identify
supported camera/lens combinations. Using a teleconverter will modify
these parameters to the point the combination will no longer be
recognized and the appropriate lens module will not be used for
corrections. So, all one needs to do is modify the pertinent exif
fields to allow the lens to be again recognized as one which is
supported. Depending upon the available supported lenses for your
camera body this may mean only the focal length or maybe minimum
aperture and focal length. I use exiftools/exiftoolgui to do this in
batch mode to make these mods. Of course I keep back ups of the
original raw files and use a specific FL to denote modified data, say
399 mm for my 200-400 f/4

It's a start and you can always turn off the corrections or modify
their strength with a factor of 0-100%
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
I've read about "adaptive optics" as used by the US military, intelligence agencies, etc in satellite imagery, but what about using optics to correct out of focus pictures? Is this possible? Scotius[_3_] Digital Photography 3 August 30th 10 06:43 PM
P&S Teleconverters Eric Stevens Digital SLR Cameras 39 December 20th 08 11:04 PM
Teleconverters Charles[_2_] Digital SLR Cameras 19 May 19th 07 03:41 AM
Teleconverters Dave Digital SLR Cameras 2 November 11th 06 10:27 AM
teleconverters Fred Lebow Digital SLR Cameras 0 September 1st 06 03:33 PM


All times are GMT +1. The time now is 06:18 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2004-2017 PhotoBanter.com.
The comments are property of their posters.