If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Help for D-85 LITH Developer and FX-37 developer.
I've formulated 2.5 liters of two solutions D-85 (kodak lith developer). I
don't find Paraformaldehyde and i've replaced it with around 200ml of acetone (82.5 mm x 2.5) but the solution DON'T WORK! For a test, i've mixed 4 parts of solution A with 1 part of solution B (no water) and i've make a strip test with 2 min, 4 min, 6 min, 8 min and 10 min. exposure time. I've immersed the strip into solution and after *10* minutes the strip test was always white (no halo, no shadows) How can be happened? Sorry, have patience, a second question: What is life time of FX-37? My formulation have now 4 mounths. thanks to all and sorry for my english! PG |
#2
|
|||
|
|||
Help for D-85 LITH Developer and FX-37 developer.
"PG" ha scritto nel messaggio .. . thanks to all and sorry for my english! quello sarebbe il meno....... ))))))))))))))))))) |
#3
|
|||
|
|||
Help for D-85 LITH Developer and FX-37 developer.
In data Tue, 15 Jun 2004 11:56:30 +0200, Fëdor Pavlovic' ha scritto:
quello sarebbe il meno....... be quite *EX* pyroman ! ;-) PG |
#4
|
|||
|
|||
Help for D-85 LITH Developer and FX-37 developer.
In data Tue, 15 Jun 2004 12:34:31 +0200, Vergil Starkwell ha scritto:
You must remember that few brands of paper really "liths". normally i use Bergger CB and NB, and Ilford Galerie. i've just buyed Ornano S3 LITH developer, but i wish to understand how D-85 with acetone don't work. thanks PG |
#5
|
|||
|
|||
Help for D-85 LITH Developer and FX-37 developer.
"PG" ha scritto nel messaggio .. . In data Tue, 15 Jun 2004 11:56:30 +0200, Fëdor Pavlovic' ha scritto: quello sarebbe il meno....... be quite *EX* pyroman ! ;-) yep ! now... pyroWoman )) |
#6
|
|||
|
|||
Help for D-85 LITH Developer and FX-37 developer.
PG wrote:
I've formulated 2.5 liters of two solutions D-85 (kodak lith developer). I don't find Paraformaldehyde and i've replaced it with around 200ml of acetone (82.5 mm x 2.5) but the solution DON'T WORK! Why would you think acetone would substitute for paraformaldehyde? Why not just buy Kodak Litho Developer? -- .~. Jean-David Beyer Registered Linux User 85642. /V\ Registered Machine 241939. /( )\ Shrewsbury, New Jersey http://counter.li.org ^^-^^ 09:25:00 up 7 days, 18:51, 4 users, load average: 4.27, 4.17, 4.05 |
#7
|
|||
|
|||
Help for D-85 LITH Developer and FX-37 developer.
In data Tue, 15 Jun 2004 09:30:37 -0400, Jean-David Beyer ha scritto:
Why not just buy Kodak Litho Developer? because i needed use it immediately and it's too difficult to find in italy. :-( |
#8
|
|||
|
|||
Help for D-85 LITH Developer and FX-37 developer.
Why not just buy Kodak Litho Developer?
because i needed use it immediately and it's too difficult to find in italy. :-( Try stores/companies that sell to printers, as in printing newspapers, printing menus, printing business forms .... these stores will all carry lith developer - many photo stores don't (heck, many photo stores around here don't even carry Dektol). -- Nicholas O. Lindan, Cleveland, Ohio Consulting Engineer: Electronics; Informatics; Photonics. Remove spaces etc. to reply: n o lindan at net com dot com |
#9
|
|||
|
|||
Help for D-85 LITH Developer and FX-37 developer.
In data Tue, 15 Jun 2004 13:46:20 GMT, Nicholas O. Lindan ha scritto:
because i needed use it immediately and it's too difficult to find in italy. :-( Try stores/companies that sell to printers, as in printing newspapers, printing menus, printing business forms .... When i can do it, i prefer to mix my chem manually. With this procedure i can have mach more control to process, and i can modify it ever needs. i have buyed too chemicals by now that i use when possible. ;-) thanks PG |
#10
|
|||
|
|||
Help for D-85 LITH Developer and FX-37 developer.
If the original formula is with parafolmadehyde, then of course it doesn't
work without it. -- Dimitris Tzortzakakis,Iraklion Crete,Greece Analogue technology rules-digital sucks http://www.patriko-kreta.com dimtzort AT otenet DOT gr the return adress is corrupted Warning:all offending emails will be deleted, and the offender/spammer will be put on my personal "black list". ? "PG" ?????? ??? ?????? ... In data Tue, 15 Jun 2004 12:34:31 +0200, Vergil Starkwell ha scritto: You must remember that few brands of paper really "liths". normally i use Bergger CB and NB, and Ilford Galerie. i've just buyed Ornano S3 LITH developer, but i wish to understand how D-85 with acetone don't work. thanks PG |
|
Thread Tools | |
Display Modes | |
|
|