A Photography forum. PhotoBanter.com

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PhotoBanter.com forum » Photo Equipment » APS Photographic Equipment
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

HELP PLEASE - APS REWIND BACK TO ZERO WITH NEW FILM



 
 
Thread Tools Display Modes
  #1  
Old August 30th 04, 01:58 PM
grahal
external usenet poster
 
Posts: n/a
Default HELP PLEASE - APS REWIND BACK TO ZERO WITH NEW FILM

Hi all

I can't believe I'm the only one who has this problem ... but despite
over and hours searching on the web I can't find any other
`occurences`??

My Konica Revio Z2 has developed a fault ... when loading a new film
it winds to 25 then back to 0 / Zero (film goes to setting `3` / X.
I've fitted a new battery and bought 2 new films (even tapped the film
which I read somewhere)... no different still rewwinds back to 0 /
Zero.

I am a technical person and have tried every combination of battery in
film in switch off switch on etc I can think of ... fault still there.
I,ve clicked the little setting back to `1` / o on the film several
times when trying different combinations of `fettling` (for want of a
better word lol)

Is it knackered or does soembody out there know of a fix PLEASE?

Thanks So Much in Anticipation

Graham
  #2  
Old September 3rd 04, 10:05 PM
Fred McKenzie
external usenet poster
 
Posts: n/a
Default

My Konica Revio Z2 has developed a fault ... when loading a new film
it winds to 25 then back to 0 / Zero (film goes to setting `3` / X.

Graham-

There is so little traffic in the APS newsgroup, I thought I would at least be
able to sympathize with you!

As I understand it, some APS cameras have the ability to remove the film,
insert a different roll, remove that, and re-insert the first roll so it winds
back to the place where it was before being removed. (My Elph Jr. doesn't, as
far as I know.)

It would seem that your camera thinks the film was previously used, and rewinds
it to where it thinks there is unused film. If your camera has a setup menu, I
wonder if this is an optional setting that can be turned off and on? If so,
you might try changing it to see if there might be a flipped bit that can be
corrected by exercising the option.

Along that line of reasoning, you might have to leave the battery out a little
longer, but sometimes you can get the camera to return to original default
settings. I have a couple of digital cameras that do that if I forget to put
in another set of batteries while the first is being charged. After half an
hour or so without a battery, they reset.

You might contact the company and ask for advice. It might be a common
problem, or they might be willing to tell you how to reset the camera's
computer.

Fred

  #3  
Old September 4th 04, 06:48 PM
grahal
external usenet poster
 
Posts: n/a
Default

Fred

Thanks so much for the suggestions ... I had also thought along those
lines, but I cannot find any reference to my camera having a mid roll
rewind setting etc, but I will have a 2nd look now you have prompted
me.

I also left the batteries out for a few days and also pressed the
reset with a biro etc ... we think alike! I will try to e-mail Konica
as you suggest.

The annoying thing is both my daughter and I bought cameras (mine a
Konica and a hers a cheaper APS camera for about £30) when we in the
Canaries ... hers developed this same fault (can you believe it!?)
after the 2nd roll and mine has lasted 2 years and had about 20 or
more rolls through it.

Have you ever heard of the airport security x ray etc doing damage of
this type to cameras?

Thanks again Fred ... any more thoughts would be appreciated

Graham


(Fred McKenzie) wrote in message ...
My Konica Revio Z2 has developed a fault ... when loading a new film
it winds to 25 then back to 0 / Zero (film goes to setting `3` / X.

Graham-

There is so little traffic in the APS newsgroup, I thought I would at least be
able to sympathize with you!

As I understand it, some APS cameras have the ability to remove the film,
insert a different roll, remove that, and re-insert the first roll so it winds
back to the place where it was before being removed. (My Elph Jr. doesn't, as
far as I know.)

It would seem that your camera thinks the film was previously used, and rewinds
it to where it thinks there is unused film. If your camera has a setup menu, I
wonder if this is an optional setting that can be turned off and on? If so,
you might try changing it to see if there might be a flipped bit that can be
corrected by exercising the option.

Along that line of reasoning, you might have to leave the battery out a little
longer, but sometimes you can get the camera to return to original default
settings. I have a couple of digital cameras that do that if I forget to put
in another set of batteries while the first is being charged. After half an
hour or so without a battery, they reset.

You might contact the company and ask for advice. It might be a common
problem, or they might be willing to tell you how to reset the camera's
computer.

Fred

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
below $1000 film vs digital Mike Henley Medium Format Photography Equipment 182 June 25th 04 03:37 AM
Graphic 120 roll film back for 4x5 Massimiliano Spoto Large Format Photography Equipment 2 May 24th 04 02:01 AM
SL66 film back Serge Korolev Medium Format Photography Equipment 7 March 9th 04 01:25 PM
Sixty-year-old undeveloped film Mark In The Darkroom 13 February 22nd 04 08:30 AM
Which is better? digital cameras or older crappy cameras thatuse film? Michael Weinstein, M.D. In The Darkroom 13 January 24th 04 10:51 PM


All times are GMT +1. The time now is 11:46 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PhotoBanter.com.
The comments are property of their posters.