If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Film developing
Tina,
200 is OK to use with 400 speed film. You might have arrived at that anyway. I would suggest that you obtain a hand meter to go with your Rollei. That might be more useful than the camera meter. That is a great camera by the way. Frank Rome, NY Tina wrote: O.k I"m very familiar with shooting 35mm film, ( I do B&W) developing, making prints in my darkroom so I made a plunge and bought a Rolleiflex camera medium format (dated 1955) and I got it today and the ASA only goes up to 200 speed and I already ordered some 120 Ilford film at a speed of 400, now the question, how should I process it, I usually use D-76 and for that matter I"m gonna put the camera on 200 speed and shoot away.Anything I should do special in shooting or developing.....I didn't relize that the ASA only went up to 200 speed....I'm learning....ever so slowly....thanks for any info Tina |
#12
|
|||
|
|||
Film developing
The camera doesn't have a built in meter (I metered with my own hand
held)....but I found another problem...I loaded some film and the counter didn't count to 1 so I found that out and kept advanceing the winder till it was on the takeup spool so I rewound it to the first spool and just guessed at where the film was....well I shot the whole roll and 1 picture came out so it's off to the camera shop tomorrow to see if it can be fixed.....I also ordered the book by Ian Parker , complete rollei tlr collectors guide so I'll have that coming....I had no problem focusing at all but I'll have to see what the camera guy says when he gets it tomorrow hope it can be fixed or else I might have not done something incorrectly since I have no manual for it..........it seems like a simple enough camera.....I"ll keep ya posted with how I"m doing with it...thanks for the advice. Tina "Nick Zentena" wrote in message ... Tina wrote: O.k I"m very familiar with shooting 35mm film, ( I do B&W) developing, making prints in my darkroom so I made a plunge and bought a Rolleiflex camera medium format (dated 1955) and I got it today and the ASA only goes up to 200 speed and I already ordered some 120 Ilford film at a speed of 400, now the question, how should I process it, I usually use D-76 and for Do you mean the camera has a meter and it only goes to 200? If that's what you mean I'm going out on a limb and claiming you can just ignore the meter. Use a handheld meter. Or if you really want to use the built in meter then set it at 200 and see what combination of F/stop and shutter speed it wants you to use. Then either close the aperture one stop or change the shutter one speed faster. OTOH if the camera is some how coupled to the meter and you can't work around it then I'd suggest just trying the first roll with no changes. You really should test your setup to find out what your true film speed is. Nick |
#13
|
|||
|
|||
Film developing
The camera doesn't have a built in meter (I metered with my own hand
held)....but I found another problem...I loaded some film and the counter didn't count to 1 so I found that out and kept advanceing the winder till it was on the takeup spool so I rewound it to the first spool and just guessed at where the film was....well I shot the whole roll and 1 picture came out so it's off to the camera shop tomorrow to see if it can be fixed.....I also ordered the book by Ian Parker , complete rollei tlr collectors guide so I'll have that coming....I had no problem focusing at all but I'll have to see what the camera guy says when he gets it tomorrow hope it can be fixed or else I might have not done something incorrectly since I have no manual for it..........it seems like a simple enough camera.....I"ll keep ya posted with how I"m doing with it...thanks for the advice. Tina "Nick Zentena" wrote in message ... Tina wrote: O.k I"m very familiar with shooting 35mm film, ( I do B&W) developing, making prints in my darkroom so I made a plunge and bought a Rolleiflex camera medium format (dated 1955) and I got it today and the ASA only goes up to 200 speed and I already ordered some 120 Ilford film at a speed of 400, now the question, how should I process it, I usually use D-76 and for Do you mean the camera has a meter and it only goes to 200? If that's what you mean I'm going out on a limb and claiming you can just ignore the meter. Use a handheld meter. Or if you really want to use the built in meter then set it at 200 and see what combination of F/stop and shutter speed it wants you to use. Then either close the aperture one stop or change the shutter one speed faster. OTOH if the camera is some how coupled to the meter and you can't work around it then I'd suggest just trying the first roll with no changes. You really should test your setup to find out what your true film speed is. Nick |
#14
|
|||
|
|||
Film developing
If it is a Rolleiflex rather than an Rolleicord, the film needs to go between
the two pinch rollers, or the counter, and auto stop will not work. Not something that is intuitive to a new user. -- Tina wrote: The camera doesn't have a built in meter (I metered with my own hand held)....but I found another problem...I loaded some film and the counter didn't count to 1 so I found that out and kept advanceing the winder till it was on the takeup spool so I rewound it to the first spool and just guessed at where the film was....well I shot the whole roll and 1 picture came out so it's off to the camera shop tomorrow to see if it can be fixed.....I also ordered the book by Ian Parker , complete rollei tlr collectors guide so I'll have that coming....I had no problem focusing at all but I'll have to see what the camera guy says when he gets it tomorrow hope it can be fixed or else I might have not done something incorrectly since I have no manual for it..........it seems like a simple enough camera.....I"ll keep ya posted with how I"m doing with it...thanks for the advice. Tina "Nick Zentena" wrote in message ... Tina wrote: O.k I"m very familiar with shooting 35mm film, ( I do B&W) developing, making prints in my darkroom so I made a plunge and bought a Rolleiflex camera medium format (dated 1955) and I got it today and the ASA only goes up to 200 speed and I already ordered some 120 Ilford film at a speed of 400, now the question, how should I process it, I usually use D-76 and for Do you mean the camera has a meter and it only goes to 200? If that's what you mean I'm going out on a limb and claiming you can just ignore the meter. Use a handheld meter. Or if you really want to use the built in meter then set it at 200 and see what combination of F/stop and shutter speed it wants you to use. Then either close the aperture one stop or change the shutter one speed faster. OTOH if the camera is some how coupled to the meter and you can't work around it then I'd suggest just trying the first roll with no changes. You really should test your setup to find out what your true film speed is. Nick |
#15
|
|||
|
|||
Film developing
Tina wrote:
The camera doesn't have a built in meter (I metered with my own hand held)....but I found another problem...I loaded some film and the counter didn't count to 1 so I found that out and kept advanceing the winder till it was on the takeup spool so I rewound it to the first spool and just guessed at where the film was....w If this is a rolleiflex automat, the most likely thing is forgetting to feed the backing paper under the first roller. I've done this myself. Peter. -- |
#16
|
|||
|
|||
Film developing
Tina wrote:
The camera doesn't have a built in meter (I metered with my own hand held)....but I found another problem...I loaded some film and the counter didn't count to 1 so I found that out and kept advanceing the winder till it was on the takeup spool so I rewound it to the first spool and just guessed at where the film was....w If this is a rolleiflex automat, the most likely thing is forgetting to feed the backing paper under the first roller. I've done this myself. Peter. -- |
#17
|
|||
|
|||
Film developing
It seems that Imight have not fed the film in correctly...so I'll have the
camera guy show me how it's done with film...the camera is a rolleiflex 3.5 mx-evs type 2 according to the ebay seller...so knowing me I probably did something wrong....hopefully it was me and not the camera's fault....I'll let ya know after I return from the camera guy.... Tina "Peter Irwin" wrote in message ... Tina wrote: The camera doesn't have a built in meter (I metered with my own hand held)....but I found another problem...I loaded some film and the counter didn't count to 1 so I found that out and kept advanceing the winder till it was on the takeup spool so I rewound it to the first spool and just guessed at where the film was....w If this is a rolleiflex automat, the most likely thing is forgetting to feed the backing paper under the first roller. I've done this myself. Peter. -- |
#18
|
|||
|
|||
Film developing
It seems that Imight have not fed the film in correctly...so I'll have the
camera guy show me how it's done with film...the camera is a rolleiflex 3.5 mx-evs type 2 according to the ebay seller...so knowing me I probably did something wrong....hopefully it was me and not the camera's fault....I'll let ya know after I return from the camera guy.... Tina "Peter Irwin" wrote in message ... Tina wrote: The camera doesn't have a built in meter (I metered with my own hand held)....but I found another problem...I loaded some film and the counter didn't count to 1 so I found that out and kept advanceing the winder till it was on the takeup spool so I rewound it to the first spool and just guessed at where the film was....w If this is a rolleiflex automat, the most likely thing is forgetting to feed the backing paper under the first roller. I've done this myself. Peter. -- |
#19
|
|||
|
|||
Film developing
Well it does seem I put the film over the roller instead of under the
roller....shot my first roll and the negatives look great....so thanks for the info and help muchly appreciated! Tina "Tina" wrote in message news:XONLc.504$FZ2.72@lakeread04... It seems that Imight have not fed the film in correctly...so I'll have the camera guy show me how it's done with film...the camera is a rolleiflex 3.5 mx-evs type 2 according to the ebay seller...so knowing me I probably did something wrong....hopefully it was me and not the camera's fault....I'll let ya know after I return from the camera guy.... Tina "Peter Irwin" wrote in message ... Tina wrote: The camera doesn't have a built in meter (I metered with my own hand held)....but I found another problem...I loaded some film and the counter didn't count to 1 so I found that out and kept advanceing the winder till it was on the takeup spool so I rewound it to the first spool and just guessed at where the film was....w If this is a rolleiflex automat, the most likely thing is forgetting to feed the backing paper under the first roller. I've done this myself. Peter. -- |
#20
|
|||
|
|||
Film developing
On Wed, 21 Jul 2004 19:19:31 -0400, "Tina"
wrote: The camera doesn't have a built in meter (I metered with my own hand held)....but I found another problem...I loaded some film and the counter didn't count to 1 so I found that out and kept advanceing the winder till it was on the takeup spool so I rewound it to the first spool and just guessed at where the film was....well I shot the whole roll and 1 picture came out so it's off to the camera shop tomorrow to see if it can be fixed.... .... Jul2404 from Lloyd Erlick, I've owned two Rollei TLRs. I love those cameras, and actually still have those two, non-functional. Unfortunately, one should be a bit of an expert before buying one. I certainly was not, and paid the price in terms of camera reliability. It's extremely easy to buy a worn-out Rollei. There is a linkage between the film advance and shutter. The shutter is in the lens, which focuses via movement of the front of the camera, so the film advance/shutter linkage is quite complex. The lens must be dismantled to repair any of this, so optical integrity is involved when certain mechanical repairs are attempted. I learned all this the hard (expensive) way. No doubt there are problems I never encountered... I'd say if an old Rollei is cheap enough to be attractive, it may well be too worn. Repairs are insanely expensive, (unless someone unqualified is involved). Putting money into a Rollei is for those with expertise. regards, --le ________________________________ Lloyd Erlick Portraits, Toronto. voice: 416-686-0326 email: net: www.heylloyd.com ________________________________ |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ALDEN-74 BULK FILM LOADER - This will be in 35mm and darkroom and no other postings | Richard Knoppow | In The Darkroom | 0 | July 14th 04 09:05 PM |
Insane new TSA rule for film inspection | [email protected] | 35mm Photo Equipment | 94 | June 23rd 04 05:17 AM |
The first film of the Digital Revolution is here.... | Todd Bailey | Film & Labs | 0 | May 27th 04 08:12 AM |
error in film developing? | Stefano Bramato | In The Darkroom | 3 | May 10th 04 07:59 AM |
Sheet film developing | Serge Korolev | In The Darkroom | 11 | April 16th 04 09:01 AM |