If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
adapt M39 to M25?
On Thu, 4 Mar 2004 20:03:58 -0500, Nick Zentena
wrote: Luigi de Guzman wrote: I can't measure very exactly, but it's about 82mm in diameter, & it's recessed a few mm. If it's only recessed a little then it's not the one I'm thinking about. Try this: http://groups.google.ca/groups?hl=en...aol.com&rnum=3 Also try emailing Jobo in the US. They handle the smaller Durst enlargers. I think from your description that the current boards should fit but better to ask. If you go to the B&H website they have a picture of the Siriotub and most of the other Durst boards. See if they look similar. Thanks for the URL and the hint. I've just e-mailed JOBO USA, and am awaiting an answer. I'm sorely tempted just to get the appropriate lensboard, but I'd be really annoyed if it happened just to be a few millimetres off...! Oh well. I can always start putting pennies in a jar for a new 80mm f/4 Componon-S. in M-25. -Luigi Nick |
#12
|
|||
|
|||
adapt M39 to M25?
Lapla is M601, M605 and (probably)M670 and M70
-- darkroommike ---------- "BertS" wrote in message link.net... jjs wrote: In article , Luigi de Guzman wrote: I have a Durst M606 whose lensboards are treaded for M25 lenses; I would like to be able to use a newer M39 lens on my enlarger. Can you have a new board made? If it's just a flat board, then it's stone simple to drill a new hole. Try http://www.cambridgeworld.com/durst_old.htm and search. That is where I got one for my M600. If they have one listed send them an e-mail. The list you see if poorly maintained and they may not have something listed in stock. On the other hand they may have something not listed. You will need to ask for their stock number, not the Durst part number. Cost should be around $25 + S&H. I have a lens board that does not fit my M600, it is bigger. Measure yours, in millimeters and I will check if mine is for the M606. It is marked "Durst Lapla 39". Unmunge my e-mail address and respond via e-mail. aasainz at ix period netcom period com. Bert |
#13
|
|||
|
|||
adapt M39 to M25?
On Fri, 5 Mar 2004 08:27:03 -0600, "Mike King"
wrote: Lapla is M601, M605 and (probably)M670 and M70 Yes, but has anyone yet tried it on the M606??? If it should work, then I'm in business! -Luigi |
|
Thread Tools | |
Display Modes | |
|
|