If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Windows 10 Experience
On Mon, 31 Aug 2015 11:34:15 -0400, Tony Cooper
wrote: Over the weekend I upgraded from Windows 7 to Windows 10. It's a painless experience and went without a hitch. All my apps carried over and opened OK. However, went I tried to use the Develop module in Lightroom, and tried to edit in CC 2015, things hung up with that "Not responding" message. Every time. The Library module in LR worked fine. I did some web sleuthing and found this a fairly common problem and is usually a problem with the graphics card drivers. I tried some fixes, but nothing eliminated the problem. I don't know what hardware you are using but if you are coming from far behind, I can heartily recommend (a) getting all your drivers (including BIOS) uptodate and (b) using Driver Detective http://www.drivershq.com/ (it won't do the BIOS). Overall, I saw nothing special about Windows 10. There are some differences in the Desktop that take a little getting used to, but no particular advantages that I could determine. Cortana works OK, and voice-opened apps and searched pretty well. That "feature" doesn't ring my bell, though. I feel silly talking to the machine when I can get where I want to go just as easily using my fingers on the keyboard or using the mouse. I suppose I'm a primitive cave dweller. I went back Windows 7. That went well also. No hitches at all, and everything is now back as it was. PS and LR work a treat. I'm not anti-10, but I have no further interest in the upgrade. I suppose I'll have to accept 10 if and when I buy a new computer, but that computer will assumedly have the right graphics card drivers. Just to be clear, I *think* it was a graphics card driver but never really determined that this was the problem with LR and PS, or that this was the only problem. I didn't bother to re-install either app. Because 10 was nothing special otherwise, I didn't pursue a solution beyond a few steps. I have an OKI C5600 printer on my home network. The two computers which connect to it run Windows 10 and XP. The most uptodate driver available for the printer is Windows 8.1. It's printing of Windows 10 but won't accept anything from XP. I suspect the problem is a clash of network security policies but so far I haven't been able to find any user interface for this in W10. Frustrating. -- Regards, Eric Stevens |
#2
|
|||
|
|||
Windows 10 Experience
On Tue, 01 Sep 2015 09:10:08 +1200, Eric Stevens
wrote: I have an OKI C5600 printer on my home network. The two computers which connect to it run Windows 10 and XP. The most uptodate driver available for the printer is Windows 8.1. It's printing of Windows 10 but won't accept anything from XP. I suspect the problem is a clash of network security policies but so far I haven't been able to find any user interface for this in W10. Frustrating. Is the XP computer looking for the wrong printer IP address, because it changed? |
#3
|
|||
|
|||
Windows 10 Experience
In article , Bill W
wrote: I have an OKI C5600 printer on my home network. The two computers which connect to it run Windows 10 and XP. The most uptodate driver available for the printer is Windows 8.1. It's printing of Windows 10 but won't accept anything from XP. I suspect the problem is a clash of network security policies but so far I haven't been able to find any user interface for this in W10. Frustrating. Is the XP computer looking for the wrong printer IP address, because it changed? it's not hard to find devices on a network, regardless of ip address. |
#4
|
|||
|
|||
Windows 10 Experience
On Mon, 31 Aug 2015 17:34:50 -0400, nospam
wrote: In article , Bill W wrote: I have an OKI C5600 printer on my home network. The two computers which connect to it run Windows 10 and XP. The most uptodate driver available for the printer is Windows 8.1. It's printing of Windows 10 but won't accept anything from XP. I suspect the problem is a clash of network security policies but so far I haven't been able to find any user interface for this in W10. Frustrating. Is the XP computer looking for the wrong printer IP address, because it changed? it's not hard to find devices on a network, regardless of ip address. If he set up a static IP for the printer, and the printer is connected directly to the network, not one of the computers, and the IP changed, I don't think the XP computer can find it. I'm basing this on my experience with PC's with static IP's, but I think it would also apply to printers. And I did admittedly leave the static part out of my first reply. |
#5
|
|||
|
|||
Windows 10 Experience
In article , Bill W
wrote: I have an OKI C5600 printer on my home network. The two computers which connect to it run Windows 10 and XP. The most uptodate driver available for the printer is Windows 8.1. It's printing of Windows 10 but won't accept anything from XP. I suspect the problem is a clash of network security policies but so far I haven't been able to find any user interface for this in W10. Frustrating. Is the XP computer looking for the wrong printer IP address, because it changed? it's not hard to find devices on a network, regardless of ip address. If he set up a static IP for the printer, and the printer is connected directly to the network, not one of the computers, and the IP changed, I don't think the XP computer can find it. it can with bonjour, without the user having to muck around configuring things. once again, let the computer do the work *for* you. I'm basing this on my experience with PC's with static IP's, but I think it would also apply to printers. And I did admittedly leave the static part out of my first reply. static ip was implied, but it doesn't actually matter. |
#6
|
|||
|
|||
Windows 10 Experience
On Mon, 31 Aug 2015 18:00:27 -0400, nospam
wrote: In article , Bill W wrote: I have an OKI C5600 printer on my home network. The two computers which connect to it run Windows 10 and XP. The most uptodate driver available for the printer is Windows 8.1. It's printing of Windows 10 but won't accept anything from XP. I suspect the problem is a clash of network security policies but so far I haven't been able to find any user interface for this in W10. Frustrating. Is the XP computer looking for the wrong printer IP address, because it changed? it's not hard to find devices on a network, regardless of ip address. If he set up a static IP for the printer, and the printer is connected directly to the network, not one of the computers, and the IP changed, I don't think the XP computer can find it. it can with bonjour, without the user having to muck around configuring things. once again, let the computer do the work *for* you. Never heard of it before. Have you used it on Windows PC's? Does it work well? Easy to use? |
#7
|
|||
|
|||
Windows 10 Experience
On Mon, 31 Aug 2015 14:47:32 -0700, Bill W
wrote: On Mon, 31 Aug 2015 17:34:50 -0400, nospam wrote: In article , Bill W wrote: I have an OKI C5600 printer on my home network. The two computers which connect to it run Windows 10 and XP. The most uptodate driver available for the printer is Windows 8.1. It's printing of Windows 10 but won't accept anything from XP. I suspect the problem is a clash of network security policies but so far I haven't been able to find any user interface for this in W10. Frustrating. Is the XP computer looking for the wrong printer IP address, because it changed? it's not hard to find devices on a network, regardless of ip address. If he set up a static IP for the printer, and the printer is connected directly to the network, not one of the computers, and the IP changed, I don't think the XP computer can find it. I'm basing this on my experience with PC's with static IP's, but I think it would also apply to printers. And I did admittedly leave the static part out of my first reply. But then we have Work Groups and Home Groups and ... -- Regards, Eric Stevens |
#8
|
|||
|
|||
Windows 10 Experience
On 8/31/2015 11:49 PM, Eric Stevens wrote:
On Mon, 31 Aug 2015 14:47:32 -0700, Bill W wrote: On Mon, 31 Aug 2015 17:34:50 -0400, nospam wrote: In article , Bill W wrote: I have an OKI C5600 printer on my home network. The two computers which connect to it run Windows 10 and XP. The most uptodate driver available for the printer is Windows 8.1. It's printing of Windows 10 but won't accept anything from XP. I suspect the problem is a clash of network security policies but so far I haven't been able to find any user interface for this in W10. Frustrating. Is the XP computer looking for the wrong printer IP address, because it changed? it's not hard to find devices on a network, regardless of ip address. If he set up a static IP for the printer, and the printer is connected directly to the network, not one of the computers, and the IP changed, I don't think the XP computer can find it. I'm basing this on my experience with PC's with static IP's, but I think it would also apply to printers. And I did admittedly leave the static part out of my first reply. But then we have Work Groups and Home Groups and ... Home Groups and Work Groups can be thought of as simply a layer of security. (I have little doubt that he who shall not be named will But why get into all that, at all. Unless there is a reason not to, simply use DHCP. -- PeterN |
#9
|
|||
|
|||
Windows 10 Experience
rOn Mon, 31 Aug 2015 14:20:19 -0700, Bill W
wrote: On Tue, 01 Sep 2015 09:10:08 +1200, Eric Stevens wrote: I have an OKI C5600 printer on my home network. The two computers which connect to it run Windows 10 and XP. The most uptodate driver available for the printer is Windows 8.1. It's printing of Windows 10 but won't accept anything from XP. I suspect the problem is a clash of network security policies but so far I haven't been able to find any user interface for this in W10. Frustrating. Is the XP computer looking for the wrong printer IP address, because it changed? XP can find it, it can print to it, but it's rejected with a print error. Maybe the new 8.1 driver is the problem, even though it's supposed to compatible with XP. I'm too busy running in other circles to find out right now. -- Regards, Eric Stevens |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Windows 10 Experience | David Taylor | Digital Photography | 3 | September 1st 15 12:44 PM |
Windows 10 Experience | nospam | Digital Photography | 6 | September 1st 15 02:19 AM |
Windows 10 Experience | PAS | Digital Photography | 0 | August 31st 15 05:20 PM |
Windows Vista Free! I Need to share my results I found Windows Vista for Free! | I love Google | Digital Photography | 7 | May 6th 07 03:37 PM |
PAN for Windows = a better news experience! | Dallas | 35mm Photo Equipment | 8 | July 8th 04 03:27 AM |