A Photography forum. PhotoBanter.com

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PhotoBanter.com forum » General Photography » Film & Labs
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Not happy with prints from Kodak T400CN



 
 
Thread Tools Display Modes
  #1  
Old May 26th 04, 11:17 AM
Phil
external usenet poster
 
Posts: n/a
Default Not happy with prints from Kodak T400CN

Hi, this is my first post to this group, so Hi everyone!
I've receantly started playing around with black and white, and as I'm
travelling it's quite hard to get to a darkroom or a decent lab so
I've been trying the C41 process films. The first lot I had developed
in a 'pro' lab and was fairly happy with, but just got contact sheets
so I could later on decide which to get printed. The second lot I had
done in a normal lab and had prints done, and they were awful! There
was no tonal variation, everything was either black, white or one
shade of grey. I'm not really expreienced enough to tell from the
negatives how they'd look printed properly.
So basically, anyone got any ideas? I'm hopeing that it's just crap
prints on cheap paper, and if they were done on B&W paper by someone
who knew what they were doing they would look ok. Or maybe it's just
my inexperience at choosing subjects (mainly landscape & buildings)
and composing. Has anyone else had decent prints done from a lab or
does getting them done properly make all the difference?
Thanks in advance,
Phil
  #2  
Old May 26th 04, 03:47 PM
Michael Weinstein
external usenet poster
 
Posts: n/a
Default Not happy with prints from Kodak T400CN

On 2004-05-26 06:17:25 -0400, (Phil) said:

Hi, this is my first post to this group, so Hi everyone!
I've receantly started playing around with black and white, and as I'm
travelling it's quite hard to get to a darkroom or a decent lab so
I've been trying the C41 process films. The first lot I had developed
in a 'pro' lab and was fairly happy with, but just got contact sheets
so I could later on decide which to get printed. The second lot I had
done in a normal lab and had prints done, and they were awful! There
was no tonal variation, everything was either black, white or one
shade of grey. I'm not really expreienced enough to tell from the
negatives how they'd look printed properly.
So basically, anyone got any ideas? I'm hopeing that it's just crap
prints on cheap paper, and if they were done on B&W paper by someone
who knew what they were doing they would look ok. Or maybe it's just
my inexperience at choosing subjects (mainly landscape & buildings)
and composing. Has anyone else had decent prints done from a lab or
does getting them done properly make all the difference?
Thanks in advance, Phil


My experience with all the C41 B&W films is that unless a pro lab does
the printing on b&w paper the pictures all have a sickly off color
cast. I suppose it's possible to print true black and white on color
paper in the standard lab system, but no one seems to do it.
--
Michael Weinstein | "Those who cannot remember the
Nashua, NH | past are condemned to repeat it."
-George Santayana

  #4  
Old May 26th 04, 08:46 PM
Ron Baird
external usenet poster
 
Posts: n/a
Default Not happy with prints from Kodak T400CN

Greetings Phil,

If it were I, Phil, I would bring in the contact sheet that you liked and
tell those at the lab you are trying to duplicate to see if they can match
the quality. If they can and at a better price, all well and good. But
make sure you note your expectations as without them you are at the mercy of
lab.

If there is something wrong with the film or the exposures are off, they can
tell you quickly right up front.

Give it a try. Talk to you soon,

Ron Baird
Eastman Kodak Company


"Phil" wrote in message
om...
Hi, this is my first post to this group, so Hi everyone!
I've receantly started playing around with black and white, and as I'm
travelling it's quite hard to get to a darkroom or a decent lab so
I've been trying the C41 process films. The first lot I had developed
in a 'pro' lab and was fairly happy with, but just got contact sheets
so I could later on decide which to get printed. The second lot I had
done in a normal lab and had prints done, and they were awful! There
was no tonal variation, everything was either black, white or one
shade of grey. I'm not really expreienced enough to tell from the
negatives how they'd look printed properly.
So basically, anyone got any ideas? I'm hopeing that it's just crap
prints on cheap paper, and if they were done on B&W paper by someone
who knew what they were doing they would look ok. Or maybe it's just
my inexperience at choosing subjects (mainly landscape & buildings)
and composing. Has anyone else had decent prints done from a lab or
does getting them done properly make all the difference?
Thanks in advance,
Phil



  #5  
Old May 27th 04, 11:29 AM
Phil
external usenet poster
 
Posts: n/a
Default Not happy with prints from Kodak T400CN

"Ron Baird" wrote in message ...
Greetings Phil,

If it were I, Phil, I would bring in the contact sheet that you liked and
tell those at the lab you are trying to duplicate to see if they can match
the quality. If they can and at a better price, all well and good. But
make sure you note your expectations as without them you are at the mercy of
lab.

If there is something wrong with the film or the exposures are off, they can
tell you quickly right up front.

Give it a try. Talk to you soon,

Ron Baird
Eastman Kodak Company


Thanks everyone! I'm actually flying to New Zealand tommorow so I
can't re-vist the lab which did the prints, but I'm going to find a
'pro' lab in Auckland and ask them to do some work on a couple of the
shots and see what the result is like. And from now on I think I'm
going to start using 'proper' black & white - was thinking of trying
some Ilford Delta 100 and Kodak T-max 100 to start with.
I should be in NZ for several months at least, so while I'll proberly
still have to get the negs developed in a lab, if I find a good one I
hope I can build a relationship with them and get some good results
from them. Well, within my own capabilities that is... ;-)
Thanks for your replys, if anyone is interested on the print results
from a decent lab I'll post here when I get them back.

Phil
  #6  
Old May 27th 04, 03:25 PM
Norman Worth
external usenet poster
 
Posts: n/a
Default Not happy with prints from Kodak T400CN

I've had a similar experience with XP-2. The routine photofinishing prints
look terrible - muddy. My photofinisher uses black and white paper for
them, too. But when I print them at home, the results are marvelous. There
seems to be nothing wrong with the film or the negative processing. The
routine photofinishing lab just can't print them. This is probably because
they have their machines set incorrectly for this king of film.

"Phil" wrote in message
om...
Hi, this is my first post to this group, so Hi everyone!
I've receantly started playing around with black and white, and as I'm
travelling it's quite hard to get to a darkroom or a decent lab so
I've been trying the C41 process films. The first lot I had developed
in a 'pro' lab and was fairly happy with, but just got contact sheets
so I could later on decide which to get printed. The second lot I had
done in a normal lab and had prints done, and they were awful! There
was no tonal variation, everything was either black, white or one
shade of grey. I'm not really expreienced enough to tell from the
negatives how they'd look printed properly.
So basically, anyone got any ideas? I'm hopeing that it's just crap
prints on cheap paper, and if they were done on B&W paper by someone
who knew what they were doing they would look ok. Or maybe it's just
my inexperience at choosing subjects (mainly landscape & buildings)
and composing. Has anyone else had decent prints done from a lab or
does getting them done properly make all the difference?
Thanks in advance,
Phil



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Kodak DX7630 or HP 945 ? Mike Henley Digital Photography 16 July 22nd 04 01:38 PM
Kodak T400CN vs Kodak BW400CN vs Fuji Neopan 400Cn (C-41) Chris Wilkins Film & Labs 0 May 14th 04 10:50 PM
Kodak discontinues T400CN and Portra 400UC, 400BW; introduces Ultra Color 100, 400, and BW400CN; improves Porta 800 Peter Lawrence Film & Labs 6 February 19th 04 06:37 PM
I'm guessing that Kodak will kill Kodachrome within the next 24 months John Horner Film & Labs 17 December 22nd 03 03:59 PM
Kodak and Fuji...Old Film Frank Pittel Film & Labs 0 September 29th 03 07:01 AM


All times are GMT +1. The time now is 07:09 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PhotoBanter.com.
The comments are property of their posters.