A Photography forum. PhotoBanter.com

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PhotoBanter.com forum » Digital Photography » Digital Photography
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Two ways of looking at how large to print



 
 
Thread Tools Display Modes
  #1  
Old April 9th 05, 12:30 AM
Scott W
external usenet poster
 
Posts: n/a
Default Two ways of looking at how large to print

In another thread the question came up as to how large can you make a
print from a give size image, in this case from a 3.2 MP camera.

There are two ways to look at how big a print should be made, both are
correct under some circumstances. On one hand you might want the print
to be just as sharp as you can get it, in this case you would want to
print at 300 dpi and some people would say even higher. This would
limit a 3.2 MP image to about a 4 x 6 print. But the other way to look
at it is that the photo has a certain amount of detail in it and you
might want the people looking at the print to be able to see all the
detail that is in the photo. The human eye has a hard time seeing low
contrast details that are small, so printing the photo large will make
more visible to the viewer.

To many photographers the sharpness of the print it critical and they
are reluctant to make prints that would reduce the resolution below 300
dpi. But for any give photo printing it larger will make a print that
almost all people will prefer to look at. I have seen this over and
over again, I used to make small prints from my Nikon 995 (3.2 MP
camera) that where very sharp and I would also make 8 x 10 prints of
these same photos. People overwhelmingly preferred to look at the 8 x
10 prints.

So what resolution is right for a print depends on the circumstances,
if you know you are going to be making 8 x 10 prints, then you are best
off using a camera that has somewhere around 8 MP. But if rather you
have a photo form a given camera and you want to make the best looking
print from it then you would print larger, printing at a DPI of
somewhere between 150 and 200 seems good.

Just to be clear I am not saying that for a given size print 150 dpi
will look better then 300 dpi, far from it. What I am saying is that
for a given digital image printing at it 150 to 200 dpi will produce a
print that most people will enjoy looking at more then a smaller print
made at a higher dpi.

I should also point out that the amount of noise in a photo will
greatly effect the optimum size to print it at, more noise smaller
print. And of course it always help if the photo is in focus.

Scott

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Ping: Ryadia --Large Digital Prints Alan Browne Digital SLR Cameras 22 February 22nd 05 04:54 PM
roll-film back: DOF question RSD99 Large Format Photography Equipment 41 July 30th 04 03:12 AM
Print more photos on one paper and save printing papers! Steve Chambers Digital Photo Equipment For Sale 0 February 26th 04 08:07 PM
WTB: Large Print Roller Gordon Chapple Darkroom Equipment For Sale 0 February 6th 04 11:56 PM
Help needed to identify an old print. (Platinum??) Graeme Fine Art, Framing and Display 3 January 17th 04 08:20 AM


All times are GMT +1. The time now is 10:01 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PhotoBanter.com.
The comments are property of their posters.