If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Using extension tubes?
I have never used extension tubes and would appreciate feedback on
some questions I have about it. 1. As I understand it the use of extension tubes is mainly used to convert normal and telephoto lenses to macro lenses -- is that correct? 2. If I were to add a 25mm tube (Canon EF 25 II) between my camera (Canon 1Dm2) and a 300mm lens (Canon EF 300mm /4.0) what would the effect be on: minimum focus distance, image size, image brightness (EV), camera function (AE/AF)? 3. What effect does using different tube lengths have? Thanks, Brian |
#2
|
|||
|
|||
"Brian Stirling" wrote in message news I have never used extension tubes and would appreciate feedback on some questions I have about it. 1. As I understand it the use of extension tubes is mainly used to convert normal and telephoto lenses to macro lenses -- is that correct? 2. If I were to add a 25mm tube (Canon EF 25 II) between my camera (Canon 1Dm2) and a 300mm lens (Canon EF 300mm /4.0) what would the effect be on: minimum focus distance, image size, image brightness (EV), camera function (AE/AF)? 3. What effect does using different tube lengths have? Basically, the function of extension tubes is to allow your lens to focus closer than it is otherwise capable. The amount of extension will effect macro ratios differently depending on the focal length and focussing capabilities of the lens you have mounted. The longer the lens, the more extension you will have to add to make macro gains. Remember, too, that it doesn't enlarge anything without you moving your rig closer to the subject. Also, you will almost universally lose the ability to focus on infinity with tubes in place. You'll lose light, but with TTL metering, your camera will compensate for this. |
#3
|
|||
|
|||
Brian Stirling wrote in
news 1. As I understand it the use of extension tubes is mainly used to convert normal and telephoto lenses to macro lenses -- is that correct? A simplified description, but yes. It's not limited to normal and tele lenses however. You can add thin tubes to wide angles for some striking perspectives. 2. If I were to add a 25mm tube (Canon EF 25 II) between my camera (Canon 1Dm2) and a 300mm lens (Canon EF 300mm /4.0) what would the effect be on: minimum focus distance, image size, image brightness (EV), camera function (AE/AF)? I am certain that someone can do the maths on this, and i am also certain that someone ain't me ;-) However, the most prominent function of an extension tube is the light loss, both in finder and on sensor of course. The camera will AE and AF as Canon's tubes transmit the electrical contacts. You don't want AF in macro photography however, better to set MF and focus by moving your upper body slightly. In my experience it's no point using tubes with tele lenses above, say, 200mm, if not to get better close focus. You get a great working distance for sure, but that deattaches you from your subject, and the larger lens is also harder to hold. 3. What effect does using different tube lengths have? You get closer and you lose light the longer the tube. For minimal light loss, a good close-up lens may be preferred. |
#4
|
|||
|
|||
"Brian Stirling" wrote in message
news I have never used extension tubes and would appreciate feedback on some questions I have about it. 1. As I understand it the use of extension tubes is mainly used to convert normal and telephoto lenses to macro lenses -- is that correct? 2. If I were to add a 25mm tube (Canon EF 25 II) between my camera (Canon 1Dm2) and a 300mm lens (Canon EF 300mm /4.0) what would the effect be on: minimum focus distance, image size, image brightness (EV), camera function (AE/AF)? 3. What effect does using different tube lengths have? Thanks, Brian OT (but still macro specific) and might not suit your purposes but would a reversing ring (instead of an extension tube) work for you? I understand (but have no experience doing this) that mounting a short lens (50mm possibly) in front of a moderate tele lens can achieve very high levels of magnification. Good Luck me |
#5
|
|||
|
|||
"Brian Stirling" wrote in message
news I have never used extension tubes and would appreciate feedback on some questions I have about it. 1. As I understand it the use of extension tubes is mainly used to convert normal and telephoto lenses to macro lenses -- is that correct? 2. If I were to add a 25mm tube (Canon EF 25 II) between my camera (Canon 1Dm2) and a 300mm lens (Canon EF 300mm /4.0) what would the effect be on: minimum focus distance, image size, image brightness (EV), camera function (AE/AF)? 3. What effect does using different tube lengths have? Thanks, Brian OT (but still macro specific) and might not suit your purposes but would a reversing ring (instead of an extension tube) work for you? I understand (but have no experience doing this) that mounting a short lens (50mm possibly) in front of a moderate tele lens can achieve very high levels of magnification. Good Luck me |
#6
|
|||
|
|||
I have never used extension tubes and would appreciate feedback on some questions I have about it. 1. As I understand it the use of extension tubes is mainly used to convert normal and telephoto lenses to macro lenses -- is that correct? Kind of. Extension tube allow your lens to focus closer than designed and therefore allow for an increased magnification 2. If I were to add a 25mm tube (Canon EF 25 II) between my camera (Canon 1Dm2) and a 300mm lens (Canon EF 300mm /4.0) what would the effect be on: minimum focus distance, image size, image brightness (EV), camera function (AE/AF)? A Canon or Kenko (much cheaper just as good) tube has the following effect Metering - The tube allows for TTL metering so you can meter as normal Light Loss - Tubes cause light loss. How much depends on the tubes but, if you are using TTL the meter only reads incomming light and it's already factored in. If using a hand held meter I hope you like math. (Actually the compensation according to the Kodak Close-Up Photo book I just opened is less than a 1/3 of a stop.) Magnification increases with tubes, Depth of field decreases. Minimum focusing distance - To figure out how much closer to a subject you can get you need to know the minimum focusing distance of the lense. I'm going to assume the the effect on magnification and focusing distance are equal is so than you can get 1/12 closer with a 25mm tube Brightness of Image- You are losing light so your image will be darker by about 1/12 3. What effect does using different tube lengths have? More tube increase each of the above effects. To achieve 1:1 Magnification with a 300mm lens you need 300mm of extension. Good luck Ray Thanks, Brian --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.786 / Virus Database: 532 - Release Date: 10/29/2004 |
#7
|
|||
|
|||
I have never used extension tubes and would appreciate feedback on some questions I have about it. 1. As I understand it the use of extension tubes is mainly used to convert normal and telephoto lenses to macro lenses -- is that correct? Kind of. Extension tube allow your lens to focus closer than designed and therefore allow for an increased magnification 2. If I were to add a 25mm tube (Canon EF 25 II) between my camera (Canon 1Dm2) and a 300mm lens (Canon EF 300mm /4.0) what would the effect be on: minimum focus distance, image size, image brightness (EV), camera function (AE/AF)? A Canon or Kenko (much cheaper just as good) tube has the following effect Metering - The tube allows for TTL metering so you can meter as normal Light Loss - Tubes cause light loss. How much depends on the tubes but, if you are using TTL the meter only reads incomming light and it's already factored in. If using a hand held meter I hope you like math. (Actually the compensation according to the Kodak Close-Up Photo book I just opened is less than a 1/3 of a stop.) Magnification increases with tubes, Depth of field decreases. Minimum focusing distance - To figure out how much closer to a subject you can get you need to know the minimum focusing distance of the lense. I'm going to assume the the effect on magnification and focusing distance are equal is so than you can get 1/12 closer with a 25mm tube Brightness of Image- You are losing light so your image will be darker by about 1/12 3. What effect does using different tube lengths have? More tube increase each of the above effects. To achieve 1:1 Magnification with a 300mm lens you need 300mm of extension. Good luck Ray Thanks, Brian --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.786 / Virus Database: 532 - Release Date: 10/29/2004 |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Using extension tubes? | Brian Stirling | Digital Photography | 13 | October 30th 04 09:59 AM |
Extension tubes | piterengel | Medium Format Photography Equipment | 11 | July 21st 04 09:53 PM |
Extension tubes | Nelkahn | 35mm Photo Equipment | 7 | July 3rd 04 02:22 AM |
Kenko extension tubes | Nelkahn | Digital Photography | 0 | June 28th 04 10:16 PM |
Close-up Photography with Extension Tubes | Tim Mathers | Photographing Nature | 0 | November 27th 03 12:19 PM |