If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Scanner advice
What is a good scanner for pro work? Is there a big learning curve?
I'm tired of paying my lab big bucks for decent scans, and I'm looking to buy a scanner, but I don't have a clue about them. I'm shooting negs for wedding portraits (digital for everything else) and slides for general personal enjoyment, nature, etc. I'm shooting 6x45 and 6x6 Hopefully for less than $1K, USD. Patrick |
#2
|
|||
|
|||
Scanner advice
Recently, Patrick L posted:
What is a good scanner for pro work? Is there a big learning curve? I'm tired of paying my lab big bucks for decent scans, and I'm looking to buy a scanner, but I don't have a clue about them. I'm shooting negs for wedding portraits (digital for everything else) and slides for general personal enjoyment, nature, etc. I'm shooting 6x45 and 6x6 Hopefully for less than $1K, USD. Since you have posted this to a Medium Format group, the short answer is "not available". -- What do you mean by decent scans? -- What do you mean by "big bucks"? -- What is your time worth? Presumably, your lab is using a pro-level scanner to do your scans. That means at the minimum something like an Imacon, and possibly a drum scanner. Those begin at about $5k USD and can go into six figures. Unless you live in an unusual market, it's unlikely that you are being charged more than $50 per scan. It will take years before you can match that price and performance point if your time is worth only minimum wage. Just my $0.02 US... Neil |
#3
|
|||
|
|||
Scanner advice
On Mar 1, 10:42 pm, "Patrick L" wrote:
What is a good scanner for pro work? Is there a big learning curve? I'm tired of paying my lab big bucks for decent scans, and I'm looking to buy a scanner, but I don't have a clue about them. I'm shooting negs for wedding portraits (digital for everything else) and slides for general personal enjoyment, nature, etc. I'm shooting 6x45 and 6x6 Hopefully for less than $1K, USD. Not dedicated film scanners at that price point, I'm afraid. The nearest would be a Coolscan 9000 at around US2.5K. Or a 2nd hand 8000 for about half that on ebay? After that the Imacons at around 5 grand. Beyond, the sky is the limit... And yes, there is a bit of a learning curve. No rocket science, but still one. Flatbed scanners are cheaper, but I wouldn't waste time with them if you want top quality results without spending hours refining images with lots of digital sharpening and manipulation Although with 6X6 you can probably get more or less acceptable results from the latest flatbed gear. But it'll be slow compared to what a dedicated film scanner can do. |
#4
|
|||
|
|||
Scanner advice
Patrick L wrote:
What is a good scanner for pro work? Is there a big learning curve? I'm tired of paying my lab big bucks for decent scans, and I'm looking to buy a scanner, but I don't have a clue about them. I'm shooting negs for wedding portraits (digital for everything else) and slides for general personal enjoyment, nature, etc. I'm shooting 6x45 and 6x6 Hopefully for less than $1K, USD. Patrick Nikon LS9000 (~ $2k) or Microtek Artixscan 120tf (~ $1.5k) are about the only choices you have. |
#5
|
|||
|
|||
Scanner advice
On Mar 1, 6:42 am, "Patrick L" wrote:
What is a good scanner for pro work? Is there a big learning curve? I'm tired of paying my lab big bucks for decent scans, and I'm looking to buy a scanner, but I don't have a clue about them. I'm shooting negs for wedding portraits (digital for everything else) and slides for general personal enjoyment, nature, etc. I'm shooting 6x45 and 6x6 Hopefully for less than $1K, USD. Patrick I have a Microtek 120tf. An examples of what it can do is at http://chasfs.com/mega.py. There's a link in the middle of that page to a full res 6x7 image. Most of the other images at http://chasfs.com were scanned with the Microtek or a Nikon 8000. The Nikon's have Digital ICE, which makes removing dirt and dust easier, but the Microtek is cheaper. B&H has them new for $1300 after rebate. Good luck with your decision! -chasfs http://zdecisions.com |
#6
|
|||
|
|||
Scanner advice
"Patrick L" wrote in message ... What is a good scanner for pro work? Is there a big learning curve? I'm tired of paying my lab big bucks for decent scans, and I'm looking to buy a scanner, but I don't have a clue about them. I'm shooting negs for wedding portraits (digital for everything else) and slides for general personal enjoyment, nature, etc. I'm shooting 6x45 and 6x6 Hopefully for less than $1K, USD. Patrick I have used the Epson 4990 for 6x45 medium format scans with very good results. 8x10's for a wedding album are no problem, I shot some Medium Format 6x45's chromes at my daughters wedding a few years ago, and my stuff scanned on a 4990 is a heck of a lot better than the prints from the PRO that used a Canon digital SLR and charged her nearly a Grand for 15 8x10's in an album and a cd with a bunch of JPEG's that I can't print a decent 8x10 from. I have made 17"x45" prints on an Epson 4000 from a crop of a 6x45 chrome, you can tell the difference between it and a regular photographic print, if you use a loupe, but its just different, not better or worse, sharpness is very good and color gamut is very good as well. I have never shot much color negative material, typical of wedding photos, and must admit I haven't gotten very proficient at scanning that material, and what I have done isn't the greatest stuff in the world, but I think that is just a good work flow issue. I shot some Fuji 400 120mm print film at a sporting event and got some decent shots, that scanned well resolution wise and after a bit of work in Photoshop I got the color to come around as well. Like I say its a work flow issue, more than anything, I think. All said and done i don't see any reason why an Epson 4990 flatbed and full frame medium format film, or even a reasonable crop, will not produce excellent wedding photos. So at right around $410 for a 4990 from B&H, I don't see where you can go wrong, or look at there V700 or V750 at $500 or $800, if these doesn't float your boat, ebay it and get a good chunk of your cash back and save for a drum scanner. B&H also has some really nice Hassy drum scanners starting at just $5000 and going on up to about $20,000. Oh, just remember film holders for these bad boys are about $200 a piece, and the extended service contract is just $1300 for a year and nearly $2000 for two years! I hope your making lots of sales to pay for these bad boys. Yes I would like to work with an Imacon drum scanner, just to say I had, but a good used one at a price I can afford has thus far eluded me. -- Later Larry |
#7
|
|||
|
|||
Scanner advice
On Thu, 8 Mar 2007 17:02:35 -0500, "Larry Heath"
wrote: So at right around $410 for a 4990 from B&H, I don't see where you can go wrong, or look at there V700 or V750 at $500 or $800, if these doesn't float your boat, ebay it and get a good chunk of your cash back and save for a drum scanner. B&H also has some really nice Hassy drum scanners starting at just $5000 and going on up to about $20,000. Oh, just remember film holders for these bad boys are about $200 a piece, and the extended service contract is just $1300 for a year and nearly $2000 for two years! I hope your making lots of sales to pay for these bad boys. Yes I would like to work with an Imacon drum scanner, just to say I had, but a good used one at a price I can afford has thus far eluded me. Those "Hassy drum scanners" aren't drum scanners at all. They're Imacons... CCD scanners. Calling them "drum scanners" is nothing more than clever marketing. rafe b www.terrapinphoto.com |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
newbie slide scanner advice | [email protected] | Digital Photography | 5 | March 17th 06 02:24 AM |
Looking for advice for a good Digital Ice 35mm slide scanner | All Things Mopar | Digital Photography | 139 | March 12th 06 04:38 AM |
Coolscan V slide scanner - advice | TheNewsGuy | Digital Photography | 1 | March 23rd 05 01:10 AM |
Need MF Scanner Advice | Bill Siler | Medium Format Photography Equipment | 39 | November 26th 04 05:04 PM |
Need Macintosh Scanner Advice | TaoSurfer | Digital Photography | 6 | November 1st 04 08:03 PM |