If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Nikon F2as and pre AI lenses
goldtech wrote:
Hi, Been trying to understand the compatibility issues of nikkor lens/ nikon camers. Say I have a Nikon f2as DP-12 finder. If I use a pre AI lens it would work but I would have stop-down light metering? Yes. At least I think so. I have an F2AS, but no pre AI lenses. The finder allows you to flip up the AI metering tab so as to mount a pre AI lens without damage, but has no prong to be captured by the pre AI lens's metering fork to tell the camera what aperture has been pre-set on the lens. But if I used a pre-AI lens on a Nikon F Photomic then the metering would be that the lens would be largest F-stop until I shoot? Or would it be stop-down as I meter? I think the former - since I believe the F's Photomic finder (and some older finders has the necessary prong that the F2AS lacks (but I've never owned an F) What would hapen if i put a Photomic finder on the F2as body? The DP-12 finder that makes an F2 an F2AS is also described as a Photomic finder. But if you mean one of the Photomic finders designed for the F, then my first guess would be that you would break one of them... probably the finder, because it would be hard to break an F2 body. ...but the pre-AI could be serviced to make it AI? Yes, if you can still find someone to do it. Apteryx |
#2
|
|||
|
|||
Nikon F2as and pre AI lenses
On Sat, 04 Apr 2009 19:59:43 +1300, Apteryx wrote:
: goldtech wrote: : Hi, : : Been trying to understand the compatibility issues of nikkor lens/ : nikon camers. : : Say I have a Nikon f2as DP-12 finder. If I use a pre AI lens it would : work but I would have stop-down light metering? : : Yes. At least I think so. I have an F2AS, but no pre AI lenses. The : finder allows you to flip up the AI metering tab so as to mount a pre AI : lens without damage, but has no prong to be captured by the pre AI : lens's metering fork to tell the camera what aperture has been pre-set : on the lens. : : But if I used a pre-AI lens on a Nikon F Photomic then the metering : would be that the lens would be largest F-stop until I shoot? Or would : it be stop-down as I meter? : : I think the former - since I believe the F's Photomic finder (and some : older finders has the necessary prong that the F2AS lacks (but I've : never owned an F) I never owned an F either, but my F2 did have a prong to engage the fork on the lens, which remained at full aperture until the shutter button was pressed (and returned to full aperture as soon as the exposure was complete). That feature may have been new on the F2; my recollection is that the front overhang that contained the prong didn't exist on the F's finder. But that recollection could well be wrong. One thing I am sure of is that you had to be careful how you mounted the lens. If the prong was in the wrong position, the fork could push it out of the way without engaging it, and the aperture settings wouldn't get passed to the finder. Bob |
#3
|
|||
|
|||
Nikon F2as and pre AI lenses
Robert Coe wrote:
On Sat, 04 Apr 2009 19:59:43 +1300, Apteryx wrote: : goldtech wrote: : Hi, : : Been trying to understand the compatibility issues of nikkor lens/ : nikon camers. : : Say I have a Nikon f2as DP-12 finder. If I use a pre AI lens it would : work but I would have stop-down light metering? : : Yes. At least I think so. I have an F2AS, but no pre AI lenses. The : finder allows you to flip up the AI metering tab so as to mount a pre AI : lens without damage, but has no prong to be captured by the pre AI : lens's metering fork to tell the camera what aperture has been pre-set : on the lens. : : But if I used a pre-AI lens on a Nikon F Photomic then the metering : would be that the lens would be largest F-stop until I shoot? Or would : it be stop-down as I meter? : : I think the former - since I believe the F's Photomic finder (and some : older finders has the necessary prong that the F2AS lacks (but I've : never owned an F) I never owned an F either, but my F2 did have a prong to engage the fork on the lens, which remained at full aperture until the shutter button was pressed (and returned to full aperture as soon as the exposure was complete). That feature may have been new on the F2; my recollection is that the front overhang that contained the prong didn't exist on the F's finder. But that recollection could well be wrong. One thing I am sure of is that you had to be careful how you mounted the lens. If the prong was in the wrong position, the fork could push it out of the way without engaging it, and the aperture settings wouldn't get passed to the finder. Ye Gods! And if you set a non-AI lens to f/5.6 you'll get warts on your hands... What a pearl of misinformation!!!! BTW: The F FTn and the non-AI F2 Photomics are conceptually the same (at least as far as the prong is concerned). Nikkormats and F Photomics prior to the FTn required setting the lens to 5.6. The prong had NOTHING to do with the so-called auto-diaphram mechanism (which was NOT new on the F2). |
#4
|
|||
|
|||
Nikon F2as and pre AI lenses
On Sat, 04 Apr 2009 15:48:39 +0200, Rol_Lei Nut
wrote: : Robert Coe wrote: : On Sat, 04 Apr 2009 19:59:43 +1300, Apteryx wrote: : : goldtech wrote: : : Hi, : : : : Been trying to understand the compatibility issues of nikkor lens/ : : nikon camers. : : : : Say I have a Nikon f2as DP-12 finder. If I use a pre AI lens it would : : work but I would have stop-down light metering? : : : : Yes. At least I think so. I have an F2AS, but no pre AI lenses. The : : finder allows you to flip up the AI metering tab so as to mount a pre AI : : lens without damage, but has no prong to be captured by the pre AI : : lens's metering fork to tell the camera what aperture has been pre-set : : on the lens. : : : : But if I used a pre-AI lens on a Nikon F Photomic then the metering : : would be that the lens would be largest F-stop until I shoot? Or would : : it be stop-down as I meter? : : : : I think the former - since I believe the F's Photomic finder (and some : : older finders has the necessary prong that the F2AS lacks (but I've : : never owned an F) : : I never owned an F either, but my F2 did have a prong to engage the fork on : the lens, which remained at full aperture until the shutter button was pressed : (and returned to full aperture as soon as the exposure was complete). That : feature may have been new on the F2; my recollection is that the front : overhang that contained the prong didn't exist on the F's finder. But that : recollection could well be wrong. : : One thing I am sure of is that you had to be careful how you mounted the lens. : If the prong was in the wrong position, the fork could push it out of the way : without engaging it, and the aperture settings wouldn't get passed to the : finder. : : : Ye Gods! : : And if you set a non-AI lens to f/5.6 you'll get warts on your hands... : : What a pearl of misinformation!!!! I suppose it's possible. My own impression is that the misinformation lies only in things you think I said but didn't. : BTW: : The F FTn and the non-AI F2 Photomics are conceptually the same (at : least as far as the prong is concerned). : Nikkormats and F Photomics prior to the FTn required setting the lens to : 5.6. My wife's Nikkormat did have to have the lens set to f/5.6 when attaching it to the camera; my F2 didn't. But on the F2 you did sometimes have to twist the setting ring back and forth to make sure the fork engaged the prong. : The prong had NOTHING to do with the so-called auto-diaphram mechanism : (which was NOT new on the F2). The auto-diaphragm mechanism would have worked without the prong, but that's hardly the point. Without the prong, the lens wouldn't have been able to inform the camera of its aperture setting, and the metering system wouldn't have known how to account for the effect of the automatic diaphragm. Anyway, I mentioned the auto-diaphragm mechanism only because it was part of the OP's question. Bob |
#5
|
|||
|
|||
Nikon F2as and pre AI lenses
Robert Coe wrote:
On Sat, 04 Apr 2009 15:48:39 +0200, Rol_Lei Nut wrote: : Robert Coe wrote: : On Sat, 04 Apr 2009 19:59:43 +1300, Apteryx wrote: : : goldtech wrote: : : Hi, : : : : Been trying to understand the compatibility issues of nikkor lens/ : : nikon camers. : : : : Say I have a Nikon f2as DP-12 finder. If I use a pre AI lens it would : : work but I would have stop-down light metering? : : : : Yes. At least I think so. I have an F2AS, but no pre AI lenses. The : : finder allows you to flip up the AI metering tab so as to mount a pre AI : : lens without damage, but has no prong to be captured by the pre AI : : lens's metering fork to tell the camera what aperture has been pre-set : : on the lens. : : : : But if I used a pre-AI lens on a Nikon F Photomic then the metering : : would be that the lens would be largest F-stop until I shoot? Or would : : it be stop-down as I meter? : : : : I think the former - since I believe the F's Photomic finder (and some : : older finders has the necessary prong that the F2AS lacks (but I've : : never owned an F) : : I never owned an F either, but my F2 did have a prong to engage the fork on : the lens, which remained at full aperture until the shutter button was pressed : (and returned to full aperture as soon as the exposure was complete). That : feature may have been new on the F2; my recollection is that the front : overhang that contained the prong didn't exist on the F's finder. But that : recollection could well be wrong. : : One thing I am sure of is that you had to be careful how you mounted the lens. : If the prong was in the wrong position, the fork could push it out of the way : without engaging it, and the aperture settings wouldn't get passed to the : finder. : : : Ye Gods! : : And if you set a non-AI lens to f/5.6 you'll get warts on your hands... : : What a pearl of misinformation!!!! I suppose it's possible. My own impression is that the misinformation lies only in things you think I said but didn't. : BTW: : The F FTn and the non-AI F2 Photomics are conceptually the same (at : least as far as the prong is concerned). : Nikkormats and F Photomics prior to the FTn required setting the lens to : 5.6. My wife's Nikkormat did have to have the lens set to f/5.6 when attaching it to the camera; my F2 didn't. But on the F2 you did sometimes have to twist the setting ring back and forth to make sure the fork engaged the prong. That's SOP on non-AI Photomics and is called indexing: Nothing at all to do with the prong being "in the wrong position" (or with the fork actually engaging the prong - it "informed" the Photomic of the maximum aperture of the lens being used). |
#6
|
|||
|
|||
Nikon F2as and pre AI lenses
Rol_Lei Nut wrote:
That's SOP on non-AI Photomics and is called indexing: Nothing at all to do with the prong being "in the wrong position" (or with the fork actually engaging the prong - it "informed" the Photomic of the maximum aperture of the lens being used). First ALL Nikon F finders with meters were called Photomic, it was a brand name. It was first used with the 1964 Photomic F finder, which was coupled to the apeture ring via a "fork" and shutter speed dial. AFAIK the name persisted until the end of the F2, as the F3 did not have a light meter in the finder, it was in the camera body. At least of the very early Nikon F series cameras had to have the F stop set at 5.6 when you put it on the camera. Once you mounted the lens on the camera, you twisited the apeture ring to "index" the meter. I think later cameras did not require you to have the lens set at f5.6 when you put them on the camera. All of the pre-AI F2 finders required indexing. That was the whole point of the AI (auto indexing) system of 1977. Note that there were two style of pre-AI meters. The first used an analog device (resistor strip) to determine the F stop. They are impossible to replace, no parts have been available for almost 30 years. The later ones made in mid 1977 and then all of the AI ones used a digtial system to determine the F stop. This consisted of a set of discrete contacts and individual resistors for each F stop. They can be rebuilt. You can tell the difference by looking at the little meter needle on the top. If it has an exta little window on the negative side (aka long tail), it has the digital strip. Geoff. -- Geoffrey S. Mendelson, Jerusalem, Israel N3OWJ/4X1GM |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Nikon F2as and pre AI lenses | Bill Graham | 35mm Photo Equipment | 0 | April 3rd 09 06:37 AM |
Promaster Spectrum 7 50mm lenses compatible with Nikon lenses mount? | [email protected] | 35mm Photo Equipment | 3 | January 9th 08 09:00 PM |
long-time Nikon F2AS user -- which SRL digital is best? | maya | Digital SLR Cameras | 23 | February 13th 07 04:46 PM |
WTT: Canon EOS Lenses for Nikon AFD Lenses | Frank Malloway | 35mm Equipment for Sale | 0 | June 26th 04 12:53 AM |
FS: Many Photo Items (Nikon Bodies/Lenses, Bessa Body/lenses, CoolScan, Tilt/shift Bellows, etc.) | David Ruether | General Equipment For Sale | 0 | December 16th 03 07:58 PM |