|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
|
Thread Tools | Display Modes |
|
#11
October 21st 04, 01:47 AM
|
|||
|
|||
In case anyone is interested, I ended up taking the camera to a local
repair place and they replaced the mirror release magnet and return spring. They also calibrated and cleaned the camera. The total repair price was $207, of which about $20 were for parts. Dan Dan R wrote: .... I have a canon eos-1n that seems to work in all aspects except for the shutter not working. When I press the shutter release, it shows the exposure info in the viewfinder and the lens auto focuses. When I press the shutter release fully, the lens stops down, but nothing else happens. The top display panel will then flash "bc" as if an error condition exists, which I suppose is true. :-) This will stop when I press the shutter release half way again. I have replaced the battery and also tried firing the shutter without the lens and neither of these help. I also removed the battery for several days, but this made no difference (the problem did start after I replaced a dead battery that was in the camera for several months). .... 
|
|
#12
October 21st 04, 01:47 AM
|
|||
|
|||
|
In case anyone is interested, I ended up taking the camera to a local
repair place and they replaced the mirror release magnet and return spring. They also calibrated and cleaned the camera. The total repair price was $207, of which about $20 were for parts. Dan Dan R wrote: .... I have a canon eos-1n that seems to work in all aspects except for the shutter not working. When I press the shutter release, it shows the exposure info in the viewfinder and the lens auto focuses. When I press the shutter release fully, the lens stops down, but nothing else happens. The top display panel will then flash "bc" as if an error condition exists, which I suppose is true. :-) This will stop when I press the shutter release half way again. I have replaced the battery and also tried firing the shutter without the lens and neither of these help. I also removed the battery for several days, but this made no difference (the problem did start after I replaced a dead battery that was in the camera for several months). ....
|
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Shutter won't release on Bronica SQ-A | Drew | Medium Format Photography Equipment | 6 | May 25th 04 01:43 AM |
| Hasselblad Auxiliary shutter question | rolento | Medium Format Photography Equipment | 14 | April 10th 04 01:40 PM |
| Dial set Compur shutter help | st | Large Format Photography Equipment | 4 | April 6th 04 12:47 PM |
| B&L compound shutter? | David Nebenzahl | Large Format Photography Equipment | 8 | February 28th 04 09:13 PM |
| mamiya sekor shutter on C33 | Mr Ed | Medium Format Photography Equipment | 4 | February 9th 04 01:05 PM |
Linear Mode
