A Photography forum. PhotoBanter.com

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PhotoBanter.com forum » General Photography » In The Darkroom
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Seal 120 Press Manual



 
 
Thread Tools Display Modes
  #1  
Old March 9th 04, 01:37 AM
???
external usenet poster
 
Posts: n/a
Default Seal 120 Press Manual

I just picked up a Seal 120 press and have several questions.

First, does anyone know the URL for Seal? I found www.forframersonly.com
but that has nothing about presses. Only adhesives. I would like to
replace the pad although I could probably just reverse it and lay down new
felt.

Second, the platen is aluminum and all the stuff I read suggests the newer
platens are high tech. Does this impact on how I use the press?

Finally, does anyone know where I can download a copy of the owners manual
so I can ensure the adjustments are correct?

Regards,

Dewey Clark







  #2  
Old March 9th 04, 02:20 AM
Richard Knoppow
external usenet poster
 
Posts: n/a
Default Seal 120 Press Manual


"???" wrote in message
...
I just picked up a Seal 120 press and have several

questions.

First, does anyone know the URL for Seal? I found

www.forframersonly.com
but that has nothing about presses. Only adhesives. I

would like to
replace the pad although I could probably just reverse it

and lay down new
felt.

Second, the platen is aluminum and all the stuff I read

suggests the newer
platens are high tech. Does this impact on how I use the

press?

Finally, does anyone know where I can download a copy of

the owners manual
so I can ensure the adjustments are correct?

Regards,

Dewey Clark

Seal products are now made by Light Impressions. The
stuff at Hunt- Bienfang is similar but is
--
---
Richard Knoppow
Los Angeles, CA, USA
ot Seal.
http://www.lightimpressionsdirect.com



  #3  
Old March 9th 04, 04:24 AM
David Nebenzahl
external usenet poster
 
Posts: n/a
Default Seal 120 Press Manual

On 3/8/2004 4:37 PM ??? spake thus:

I just picked up a Seal 120 press and have several questions.


[...]

Finally, does anyone know where I can download a copy of the owners manual
so I can ensure the adjustments are correct?


Download a copy? I don't think so. However, all you need to do is to call them
up and ask them. They mailed me a copy of the manual for my Seal (forget which
model, big one) for free. (Unfortunately, I don't have the phone # handy. I
think it's on the Hunt web site.) They were very nice about it.

You see, paper documents still have their place in the world.


--
The Bush administration should restrain itself from its imperial arrogance
that has so alienated countries around the world. Their contempt for the
United Nations in the dash to war with Iraq; their support of the coup in
Venezuela in April 2002, and the continuing hostility toward President
Chavez; the pressure on nations of the world to exempt the US from the
International Criminal Court, now joined by their contemptuous attitude
toward President Aristide must be halted. It is time for the people of the
USA to make this point clear even if the administration continues to walk
around with wax in its collective ears, with eyes closed, and ranting about
its version of the world as defined by Bush.

- Excerpt from TransAfrica statement on the situation in Haiti, 2/17/04
(http://www.transafricaforum.org/)

  #4  
Old March 9th 04, 12:02 PM
???
external usenet poster
 
Posts: n/a
Default Seal 120 Press Manual

David,

Do know the URL to the website you used?

Regards,

Dewey Clark]

"David Nebenzahl" wrote in message
...

Download a copy? I don't think so. However, all you need to do is to call

them
up and ask them. They mailed me a copy of the manual for my Seal (forget

which
model, big one) for free. (Unfortunately, I don't have the phone # handy.

I
think it's on the Hunt web site.) They were very nice about it.

You see, paper documents still have their place in the world.


--
The Bush administration should restrain itself from its imperial arrogance
that has so alienated countries around the world. Their contempt for the
United Nations in the dash to war with Iraq; their support of the coup in
Venezuela in April 2002, and the continuing hostility toward President
Chavez; the pressure on nations of the world to exempt the US from the
International Criminal Court, now joined by their contemptuous attitude
toward President Aristide must be halted. It is time for the people of the
USA to make this point clear even if the administration continues to walk
around with wax in its collective ears, with eyes closed, and ranting

about
its version of the world as defined by Bush.

- Excerpt from TransAfrica statement on the situation in Haiti, 2/17/04
(http://www.transafricaforum.org/)



  #5  
Old March 9th 04, 10:34 PM
Richard Knoppow
external usenet poster
 
Posts: n/a
Default Seal 120 Press Manual


"???" wrote in message
...
I just picked up a Seal 120 press and have several

questions.

First, does anyone know the URL for Seal? I found

www.forframersonly.com
but that has nothing about presses. Only adhesives. I

would like to
replace the pad although I could probably just reverse it

and lay down new
felt.

Second, the platen is aluminum and all the stuff I read

suggests the newer
platens are high tech. Does this impact on how I use the

press?

Finally, does anyone know where I can download a copy of

the owners manual
so I can ensure the adjustments are correct?

Regards,

Dewey Clark

Soomehow my post got truncated. Seal presses and
materials are now marketed by Light Impressions. Their web
site is: http://www.lightimpressionsdirect.com They
probably can help you .


--
---
Richard Knoppow
Los Angeles, CA, USA



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 03:21 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PhotoBanter.com.
The comments are property of their posters.