If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Problem with Nikon D70 and Vivitar ringlight flash
I have attached a Vivitar 6000AF ringlight flash (for Nikon) to a Nikon
D70. However, I cannot get the shutter to fire. Camera is set to auto. Settings have been reset to default. The lens is a D series CPU lens (AF Micro Nikkor 105mm 1:2.8D). The ready light on the flash is lit, the test button fires the flash just fine. The flash indicator is blinking. The shutter fires correctly when the flash is not attached. The flash is TTL capable. I have tried focusing at various ranges from less than 1 foot to 8 feet. I have tried setting ISO to auto. Is there a setting I need to change in order for this to work right? |
Thread Tools | |
Display Modes | |
|
|