If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
"Autostitch" issue
I downloaded the demo of this program but it
only seems to be able to handle 2 images to produce a panorama. When it's working, it indicates that 3 images (if that is what you are using) are being combined, but when the panorama is finished, it only shows the results of stitching 2 of the images. I checked the faq, which indicates it's limitations as a demo, but it does not seem to mention that limitation. I'd prefer to get this program is it is 100x better than Olympus's panoramic software function. |
#2
|
|||
|
|||
On Fri, 10 Jun 2005 22:24:21 -0400, RichA wrote:
I downloaded the demo of this program but it only seems to be able to handle 2 images to produce a panorama. When it's working, it indicates that 3 images (if that is what you are using) are being combined, but when the panorama is finished, it only shows the results of stitching 2 of the images. I checked the faq, which indicates it's limitations as a demo, but it does not seem to mention that limitation. I'd prefer to get this program is it is 100x better than Olympus's panoramic software function. Strike the above. For whatever reason, it couldn't "lock in" on one image I took even though it was part of a panorama. It has worked on others I took. -Rich |
#3
|
|||
|
|||
Hi Rich,
Before you start it going remember to adjust the scale, by default its 10% so the pano's will be quite small. Great bit of software though, Ive had lots of good results from it Todd. ToneUp - www.oxfordeye.co.uk "RichA" wrote in message ... On Fri, 10 Jun 2005 22:24:21 -0400, RichA wrote: I downloaded the demo of this program but it only seems to be able to handle 2 images to produce a panorama. When it's working, it indicates that 3 images (if that is what you are using) are being combined, but when the panorama is finished, it only shows the results of stitching 2 of the images. I checked the faq, which indicates it's limitations as a demo, but it does not seem to mention that limitation. I'd prefer to get this program is it is 100x better than Olympus's panoramic software function. Strike the above. For whatever reason, it couldn't "lock in" on one image I took even though it was part of a panorama. It has worked on others I took. -Rich |
#4
|
|||
|
|||
On Sat, 11 Jun 2005 10:39:08 +0100, "
wrote: Hi Rich, Before you start it going remember to adjust the scale, by default its 10% so the pano's will be quite small. Great bit of software though, Ive had lots of good results from it I think that default is in deferrence to the computation time needed to do the job. Coupling five full sized images from an 8 meg camera takes awhile to accomplish. But it does such a good job it doesn't bother me. -Rich |
#5
|
|||
|
|||
I stitched up a 22 shot pano and it took forever, looked fantastic though
The only problem Ive found with Autostitch is when you give it shots that form a vertical pano, then it really grinds and gets confused. The only way round this Ive found is to manually rotate the shots in Photoshop first. Todd. "RichA" wrote in message ... On Sat, 11 Jun 2005 10:39:08 +0100, " wrote: Hi Rich, Before you start it going remember to adjust the scale, by default its 10% so the pano's will be quite small. Great bit of software though, Ive had lots of good results from it I think that default is in deferrence to the computation time needed to do the job. Coupling five full sized images from an 8 meg camera takes awhile to accomplish. But it does such a good job it doesn't bother me. -Rich |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Shutter Speed Lag an issue? | R. | Digital Photography | 0 | April 8th 05 06:21 AM |
Autostitch question | Bruce W.1 | Digital Photography | 7 | March 29th 05 11:10 PM |
AutoStitch | Steve Wolfe | Digital Photography | 8 | March 19th 05 11:32 PM |
Attn: Ron Baird - DC4800 Issue | Steve | Digital Photography | 0 | March 13th 05 11:45 PM |
Canon SD300 first impressions... and possible issue? | Curt Bousquet | Digital Photography | 33 | January 7th 05 04:16 PM |