If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Tripod mounting question
Many pan/tilt heads and quick release mounts have a sprung pin an inch or so
from the mounting screw. I've yet to see a camera base with a mating hole, so what is the pin for (apart from scratching the paint off my camera)? Maybe it's just a pro camera thing? Steve |
#2
|
|||
|
|||
Tripod mounting question
"Steve Carpenter" wrote in message ... Many pan/tilt heads and quick release mounts have a sprung pin an inch or so from the mounting screw. I've yet to see a camera base with a mating hole, so what is the pin for (apart from scratching the paint off my camera)? Maybe it's just a pro camera thing? Steve Many cameras/lens/scopes have holes for that 'sprung pin'. It keeps them straight on the mount. Ron |
#3
|
|||
|
|||
Tripod mounting question
"Ron Recer" wrote in message ... "Steve Carpenter" wrote in message ... Many pan/tilt heads and quick release mounts have a sprung pin an inch or so from the mounting screw. I've yet to see a camera base with a mating hole, so what is the pin for (apart from scratching the paint off my camera)? Maybe it's just a pro camera thing? Steve Many cameras/lens/scopes have holes for that 'sprung pin'. It keeps them straight on the mount. Ron Many video cameras have these - and the pins on the tripod heads or plates can generally be easily removed. -- David Ruether http://www.donferrario.com/ruether |
#4
|
|||
|
|||
Tripod mounting question
OK, thanks folks.
Steve "David Ruether" wrote in message ... "Ron Recer" wrote in message ... "Steve Carpenter" wrote in message ... Many pan/tilt heads and quick release mounts have a sprung pin an inch or so from the mounting screw. I've yet to see a camera base with a mating hole, so what is the pin for (apart from scratching the paint off my camera)? Maybe it's just a pro camera thing? Steve Many cameras/lens/scopes have holes for that 'sprung pin'. It keeps them straight on the mount. Ron Many video cameras have these - and the pins on the tripod heads or plates can generally be easily removed. -- David Ruether http://www.donferrario.com/ruether |
#5
|
|||
|
|||
Tripod mounting question
On Jul 8, 4:54 pm, "Steve Carpenter" wrote:
Many pan/tilt heads and quick release mounts have a sprung pin an inch or so from the mounting screw. I've yet to see a camera base with a mating hole, so what is the pin for (apart from scratching the paint off my camera)? Maybe it's just a pro camera thing? Steve Lots of cameras have them ... but they are all video cameras. Most better heads have the ability to unscrew the pin and remove it. |
#6
|
|||
|
|||
Tripod mounting question
Steve Carpenter wrote:
Many pan/tilt heads and quick release mounts have a sprung pin an inch or so from the mounting screw. I've yet to see a camera base with a mating hole, so what is the pin for (apart from scratching the paint off my camera)? Maybe it's just a pro camera thing? Steve Some quick release heads have this sprung pin as a safety measure. The pin will catch onto the edge of the QR plate and keep it from falling out if the release is inadvertantly loosened but not to the extent of intentinally removing. The plate hast to be machined to take advantage of that pin to provide the safety measure. Quoting from Acratech's web page: "At Acratech we have developed a spring-loaded detent pin that projects into the pockets or windows that are cut into the bottom of most manufactures (Acratech, Kirk, Really Right Stuff, etc.) quick release plates. Our detent pin will prevent the plate from accidentally sliding out in the event that the knob is partially loosened." JD |
#7
|
|||
|
|||
Tripod mounting question
Hey. Please visit my website
www.bangbangboomboom.com On Jul 8, 1:54 pm, "Steve Carpenter" wrote: Many pan/tilt heads and quick release mounts have a sprung pin an inch or so from the mounting screw. I've yet to see a camera base with a mating hole, so what is the pin for (apart from scratching the paint off my camera)? Maybe it's just a pro camera thing? Steve Plesase |
#8
|
|||
|
|||
Tripod mounting question
Steve Carpenter wrote:
Many pan/tilt heads and quick release mounts have a sprung pin an inch or so from the mounting screw. I've yet to see a camera base with a mating hole, so what is the pin for (apart from scratching the paint off my camera)? Maybe it's just a pro camera thing? Rather a video camera thing jue |
#9
|
|||
|
|||
Tripod mounting question
Pat wrote:
On Jul 8, 4:54 pm, "Steve Carpenter" wrote: Many pan/tilt heads and quick release mounts have a sprung pin an inch or so from the mounting screw. I've yet to see a camera base with a mating hole, so what is the pin for (apart from scratching the paint off my camera)? Maybe it's just a pro camera thing? Steve Lots of cameras have them ... but they are all video cameras. THe lens cradle for my Sony DSC-R1, which is not a video camera, has a hole which mates with the pin in one of my quick release mounts. It clearly serves to stop a camera with a long heavy lens from twisting around an insufficiently tightened tripod thread. -- Chris Malcolm DoD #205 IPAB, Informatics, JCMB, King's Buildings, Edinburgh, EH9 3JZ, UK [http://www.dai.ed.ac.uk/homes/cam/] |
#10
|
|||
|
|||
Tripod mounting question
On Jul 11, 4:59 am, Chris Malcolm wrote:
Pat wrote: On Jul 8, 4:54 pm, "Steve Carpenter" wrote: Many pan/tilt heads and quick release mounts have a sprung pin an inch or so from the mounting screw. I've yet to see a camera base with a mating hole, so what is the pin for (apart from scratching the paint off my camera)? Maybe it's just a pro camera thing? Steve Lots of cameras have them ... but they are all video cameras. THe lens cradle for my Sony DSC-R1, which is not a video camera, has a hole which mates with the pin in one of my quick release mounts. It clearly serves to stop a camera with a long heavy lens from twisting around an insufficiently tightened tripod thread. No it clearly doesn't for three clear reasons. First, one clearly knows that if you are using a long, heavy lens then you put the tripod on the lens, not the camera. Second, if you are using a heavy rig, clearly you go to a stronger system with a larger screw. Thirdly, if you didn't tighten the darned thing up, then you lens would be moving and clearly your picture wouldn't be clear. It doesn't take much movement with a big lens. The purpose of the pin is to keep the camera from unscrewing when you are panning back and forth. |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Tripod Question | Mike | Digital Photography | 14 | January 18th 07 03:39 AM |
Seal Dry Mounting Press Jumbo 150 Question | Sam Avampato | In The Darkroom | 4 | July 22nd 06 07:31 PM |
Mounting Canon 70-200 On Tripod | Simon | Digital Photography | 16 | June 11th 06 10:52 PM |
QUESTION: DRY MOUNTING LARGE GLOSSY PRINTS | Michael Bonnycastle | In The Darkroom | 6 | April 2nd 04 04:00 PM |
Question on lens mounting methods | James Dunn | Large Format Photography Equipment | 4 | January 25th 04 02:01 AM |