If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Canon S3 IS - Now with Remote Cable Release Via USB Cable!
One of the people working on CHDK has managed to port the code from an A710
build, where someone found a way to apply 3V to the USB's normal 5V cable pins to trigger a CHDK script command. Something that they thought nobody would ever be able to do since Canon started to cripple all their P&S cameras from having a cable-release option. Part of Canon's "let's find ways to force people to buy DSLRs" marketing campaign. See these pages for photos on how to build a super simple USB remote-cable release: http://ewavr.nm.ru/chdk/remote.htm It can be fitted into any USB cable plug and attached to the end of any USB extension cable when needed. One small switch, one little button battery, it doesn't get simpler than that. Here's the link for the binaries and source code for the A710 IS version if needed http://ewavr.nm.ru/chdk/ Here's the page for the new S3 IS version! http://hem.passagen.se/fsmmal/chdk2.html Now you are able to remote trigger your S3 IS camera by any device you can think of. Just apply a small 3volt button battery current to the normal 5volt pins on the USB cable. The same signal that tells the camera to switch to download mode has now been rerouted to a CHDK script command. Use any devices you can think of, IR remote controls, RF remote controls, light-triggers, any simple electronic switching circuit in existence! Just run this simple CHDK script, or insert this simple routine in any of your own more elaborate specialized scripts to detect whenever 3volts are applied to the USB cable pins. Just plugging your camera into your computer will trigger your camera to take a photo, as that applies 5V to the pins, a simple way to test if it's working. @title Remote button :loop wait_click 1 is_key k "remote" if k=1 then shoot goto "loop" end S3 IS + CHDK = Remote Control (w/o computer tether) Motion Detection, fast enough to take lightning photos. Extensive Intervalometer Events, with 0.1 second or greater accuracy. User Written Scripts, HDR bracketing, automated Focus Bracketing, etc. User Written Cropping & Framing Grids Hi-compression Video Mode (long list of features available at CHDK Wiki pages http://scratchpad.wikia.com/wiki/CHDK ) Just when you thought it couldn't get better it happens again! This is like getting a new camera every week, for FREE! |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Canon Cable Release Adapter T3 - VS - the RS-80N3 | Just Shoot Me | Digital SLR Cameras | 5 | September 11th 07 12:35 AM |
Cable release for Canon Rebel K2 non-date model | ZITIIIXI | 35mm Photo Equipment | 0 | October 31st 05 04:30 PM |
Cable release for Canon Rebel K2 non-date model | ZITIIIXI | 35mm Photo Equipment | 1 | October 28th 05 07:48 AM |
shutter release cable for canon elph digital 3 megapixel | frelkins | Digital Photography | 1 | January 25th 05 01:51 PM |
Any alternate suppliers for a Sony Mc EU1 remote cable release - to fit Coolpix 4500 | aristotle | Digital Photography | 0 | December 2nd 04 07:11 PM |