If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Lighting bronzes
I bought a light cube ( a sort of folding fabric cube) and a spotlight
to help me take photos of my bronze sculptures but I find they come out very dark and indistinct against the white background. I dont have much photography experience and wonder it there is a special setting or lighting technique I should be using. Where is the best place to put the light and should I have more than one? I would very much appreciate any helpful advice for a beginner. Thank you Kathy |
#2
|
|||
|
|||
"kate" wrote
I bought a light cube ( a sort of folding fabric cube) and a spotlight to help me take photos of my bronze sculptures but I find they come out very dark and indistinct against the white background. Your camera is setting the exposure to take a picture of the white background as that is what occupies most of the photograph. The sculpture is darker and so it is darker in the photo. You need to get the camera to meter the sculpture. You do not say what type of camera you are using. Try: 1) If you are using an adjustable 35mm camera then: o get an 18% grey card from the camera store o set the camera to 'manual' exposure o place the grey card at the sculpture, facing the camera o move in close with the camera or light meter and meter only the grey card o use this setting for all your shots made with the same lighting 2) If you are using an automatic camera: o meter as above o lock the exposure o move the camera back to the shooting position, take pic. you may have to do this for every picture ... automatic cameras are a bad choice for photographing art 3) If your camera has a 'backlight' setting, try that. 4) Change to a darker background, one that is the same 'value' as the sculpture - 18% reflectance is a good value. Then when your camera sets itself to take a picture of the background, the setting will also be correct for the sculpture. A deep reddish-brown background seems to be popular for bronzes. If you are taking color negatives the problem may be with the photo laboratory. Look at the negatives, if there is lots of detail in the sculpture then your laboratory is the one giving you a perfectly exposed print of the white background. Take the negatives to a proper photographic outfitter (_not_ Boots or Snappy Snaps on High Street) that has a laboratory in the back and tell them just what you need - if possible talk to the person making the prints in the laboratory. There are several books on photographing works of art. See if your library has/can order one. Or try Amazon. -- Nicholas O. Lindan, Cleveland, Ohio Consulting Engineer: Electronics; Informatics; Photonics. Remove spaces etc. to reply: n o lindan at net com dot com psst.. want to buy an f-stop timer? nolindan.com/da/fstop/ |
#3
|
|||
|
|||
"kate" wrote
I bought a light cube ( a sort of folding fabric cube) and a spotlight to help me take photos of my bronze sculptures but I find they come out very dark and indistinct against the white background. Your camera is setting the exposure to take a picture of the white background as that is what occupies most of the photograph. The sculpture is darker and so it is darker in the photo. You need to get the camera to meter the sculpture. You do not say what type of camera you are using. Try: 1) If you are using an adjustable 35mm camera then: o get an 18% grey card from the camera store o set the camera to 'manual' exposure o place the grey card at the sculpture, facing the camera o move in close with the camera or light meter and meter only the grey card o use this setting for all your shots made with the same lighting 2) If you are using an automatic camera: o meter as above o lock the exposure o move the camera back to the shooting position, take pic. you may have to do this for every picture ... automatic cameras are a bad choice for photographing art 3) If your camera has a 'backlight' setting, try that. 4) Change to a darker background, one that is the same 'value' as the sculpture - 18% reflectance is a good value. Then when your camera sets itself to take a picture of the background, the setting will also be correct for the sculpture. A deep reddish-brown background seems to be popular for bronzes. If you are taking color negatives the problem may be with the photo laboratory. Look at the negatives, if there is lots of detail in the sculpture then your laboratory is the one giving you a perfectly exposed print of the white background. Take the negatives to a proper photographic outfitter (_not_ Boots or Snappy Snaps on High Street) that has a laboratory in the back and tell them just what you need - if possible talk to the person making the prints in the laboratory. There are several books on photographing works of art. See if your library has/can order one. Or try Amazon. -- Nicholas O. Lindan, Cleveland, Ohio Consulting Engineer: Electronics; Informatics; Photonics. Remove spaces etc. to reply: n o lindan at net com dot com psst.. want to buy an f-stop timer? nolindan.com/da/fstop/ |
#4
|
|||
|
|||
"kate" wrote in message
om... I bought a light cube ( a sort of folding fabric cube) and a spotlight to help me take photos of my bronze sculptures but I find they come out very dark and indistinct against the white background. I dont have much photography experience and wonder it there is a special setting or lighting technique I should be using. Where is the best place to put the light and should I have more than one? I would very much appreciate any helpful advice for a beginner. Thank you Kathy Here is a shot I took. http://palmiter.dotphoto.com/CPViewA...0177857&Page=1 I used a light cube and natural light from a large window to the left. I set the white balance so the color would be close, and I metered off a grey card. I think room lights were on. You know....looking at that shot...it looks like its lit from both sides. I remember the way I was facing....It looks like the windows to the right were having an effect, too...though they were far away. I am pretty sure I did not have my lights set up for this shot. I had just gotten the light box and was trying it out. I remember thinking that the ones where I used natural light were better than the ones with flash. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Photo Lighting Kits... | CA Widower | 35mm Photo Equipment | 18 | November 11th 04 02:41 PM |
recommendations on book/ questions on lighting for beginner ? | kate | Digital Photography | 2 | November 3rd 04 12:57 PM |
DIGITAL AND 1000W STUDIO LIGHTING ... | chesham | Digital Photography | 10 | July 15th 04 09:02 AM |
Home studio Shadowless lighting on a budget - help | Randy MacKenna | General Photography Techniques | 3 | December 6th 03 02:26 AM |