If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Where to get cable release socket?
I picked up a Copal Press No. 1 shutter from which some poorly thinking
person removed the mounting flange for the cable release, along with its screws. The shutter works fine when actuated from the lever, or by inserting a fine screwdriver into the cable release hole and gently pushing inwards. Does anyone know where I might find the missing bits to make this a usable shutter? Does anyone have any dead dead dead shutter hanging around that could serve as a donor? To reply by email you'll need to swap the numeral zero and the letter o before the string of non-zero numbers preceding the at-sign.. Thanks Steve |
#2
|
|||
|
|||
|
#3
|
|||
|
|||
Over the years I've had several of them suffer from the threads stripping
out. I've always gotten replacements from Calumet Photographic. KB "Stephan Goldstein" wrote in message ... I picked up a Copal Press No. 1 shutter from which some poorly thinking person removed the mounting flange for the cable release, along with its screws. The shutter works fine when actuated from the lever, or by inserting a fine screwdriver into the cable release hole and gently pushing inwards. Does anyone know where I might find the missing bits to make this a usable shutter? Does anyone have any dead dead dead shutter hanging around that could serve as a donor? To reply by email you'll need to swap the numeral zero and the letter o before the string of non-zero numbers preceding the at-sign.. Thanks Steve |
#4
|
|||
|
|||
"Ken Burns" wrote in message
ink.net... Over the years I've had several of them suffer from the threads stripping out. I've always gotten replacements from Calumet Photographic. Greeting, Ken: .. Red Locktite. It takes up 002" of slack. Try it. |
#5
|
|||
|
|||
Red Locktite. It takes up 002" of slack. Try it.
Of course, once screwed in, you will never be able to get it out again. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Cable release and neutral density filter? | JZ | 35mm Photo Equipment | 8 | September 21st 04 04:00 PM |
Canon s410 and standard (powered) USB mini-B cable | Dave Martindale | Digital Photography | 2 | August 3rd 04 10:43 PM |
Canon s410 and standard (powered) USB mini-B cable | John Faughnan | Digital Photography | 3 | August 3rd 04 10:43 PM |
Electronic cable release for Ricoh Mirai ??? | headrippa | Other Photographic Equipment | 0 | February 16th 04 12:30 AM |
The Extinct Cable Release Socket | Mike King | Other Photographic Equipment | 2 | November 17th 03 06:33 PM |