If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Cleaning old 35mm slides
This question has probably been asked a thousand times but here goes.
I just bought a Plustek 7500ISE scanner to scan my dad's old slides. As I peeked at a few, they look fairly dirty. How do I clean those up? Obviously not with water (the cardboard holder wouldn't last long and water might damage the slide itself). So what is the best way to clean those? Any particular product/method? Thanks a lot! Marc |
#2
|
|||
|
|||
Cleaning old 35mm slides
Marc Bouchard wrote:
This question has probably been asked a thousand times but here goes. I just bought a Plustek 7500ISE scanner to scan my dad's old slides. As I peeked at a few, they look fairly dirty. How do I clean those up? Obviously not with water (the cardboard holder wouldn't last long and water might damage the slide itself). So what is the best way to clean those? Any particular product/method? For *very* dirty or important slides you can try the radical method (at your own risk!): Take them out of their holders, gently wash in a dishwashing liquid or baby shampoo solution (preferably stuck into film developing reels), rinse very well and do a last wash with very dilute Photo-flo or baby shampoo to prevent drying spots. Hang to dry (in reel, if available, or by corner). Do not soak for a long time (hours). I have also run them through alcohol before (and sometimes instead of) the water wash with no adverse effects. This has successfully worked for me with a number of fairly modern E6 slides (Fuji, Kodak). You might want to try it on some disposable examples of the batch to see if it is safe. Again, it is potentially high-risk, so proceed carefully. |
#3
|
|||
|
|||
Cleaning old 35mm slides
Marc Bouchard wrote,on my timestamp of 11/01/2009 6:04 AM:
This question has probably been asked a thousand times but here goes. I just bought a Plustek 7500ISE scanner to scan my dad's old slides. As I peeked at a few, they look fairly dirty. How do I clean those up? Obviously not with water (the cardboard holder wouldn't last long and water might damage the slide itself). So what is the best way to clean those? Any particular product/method? Glanz Film Cleaner, Film and Video Extras Pty Ltd, 2.20 York Road, Ingleburn, NSW, 2565, Australia, Ph: 61-2-96183104, Fax:61-2-98292835 low voice it's isopropanol, and it works a treat for old slides! /low voice |
#4
|
|||
|
|||
Cleaning old 35mm slides
On 1/10/2009 11:04 AM Marc Bouchard spake thus:
This question has probably been asked a thousand times but here goes. I just bought a Plustek 7500ISE scanner to scan my dad's old slides. As I peeked at a few, they look fairly dirty. How do I clean those up? Obviously not with water (the cardboard holder wouldn't last long and water might damage the slide itself). So what is the best way to clean those? Any particular product/method? Yes, but you can't get it anymore. I have a small bottle of Kodak's film cleaner that I've used to clean slides. It's nasty stuff--trichloreth-something, probably been banned for some time now, but it does a great job cleaning film. You very carefully apply it with a moistened cotton swab and it lifts dirt, etc., off the slide. Dunno if any kind of substitute is made. Anyone? I'd like to get some for when my little bottle runs out. Oh, and before you use the cleaner, you want to blow off as much loose dirt as you can; a blower brush is good, as someone else suggested. Gently is the key word here. So much for my never posting anything relevant here, by the way. -- Washing one's hands of the conflict between the powerful and the powerless means to side with the powerful, not to be neutral. - Paulo Freire |
#5
|
|||
|
|||
Cleaning old 35mm slides
Marc Bouchard wrote:
This question has probably been asked a thousand times but here goes. I just bought a Plustek 7500ISE scanner to scan my dad's old slides. As I peeked at a few, they look fairly dirty. How do I clean those up? Obviously not with water (the cardboard holder wouldn't last long and water might damage the slide itself). So what is the best way to clean those? Any particular product/method? If the scanner has ICE it may do well in 'removing' most of the dirt in the image. I've cleaned negatives with heavily diluted dishwasher soap. Rubbed with the tip of my finger (gently) and then rinsed. With cardboard holders you'd need to remove them and then remount in new holders. (Note: When I go through slides I throw away the worst ones by popping the film out of the slide holder. So I've got a lot of empty plastic slide holders lying around to use for this sort of thing.) -- -- r.p.e.35mm user resource: http://www.aliasimages.com/rpe35mmur.htm -- r.p.d.slr-systems: http://www.aliasimages.com/rpdslrsysur.htm -- [SI] gallery & rulz: http://www.pbase.com/shootin -- e-meil: Remove FreeLunch. -- usenet posts from gmail.com and googlemail.com are filtered out. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Cleaning old 35mm slides | [email protected] | 35mm Photo Equipment | 0 | January 11th 09 01:48 AM |
Cleaning old 35mm slides | Atheist Chaplain[_3_] | 35mm Photo Equipment | 0 | January 11th 09 01:00 AM |
Cleaning 35mm slides | David Zander | Film & Labs | 2 | May 7th 08 09:58 PM |
Cleaning 35mm slides | Dr Phred | Digital Photography | 10 | March 18th 07 03:05 AM |
Cleaning damaged 35mm slides? | Mike King | In The Darkroom | 0 | April 21st 06 06:54 AM |