A Photography forum. PhotoBanter.com

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PhotoBanter.com forum » Photo Techniques » Photographing People
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

how to put the border around a headshot?



 
 
Thread Tools Display Modes
  #1  
Old December 17th 03, 10:19 PM
Millenium
external usenet poster
 
Posts: n/a
Default how to put the border around a headshot?

Ok I took this headshot with a digital camera. Now i would like to
know, how i can put the border around it where i can put the name and
the contact info... so it look like a professional headshot.
I have photoshop 8. any ideas please.

thanks
  #2  
Old December 18th 03, 05:43 AM
zeitgeist
external usenet poster
 
Posts: n/a
Default how to put the border around a headshot?



Ok I took this headshot with a digital camera. Now i would like to
know, how i can put the border around it where i can put the name and
the contact info... so it look like a professional headshot.
I have photoshop 8. any ideas please.


crop your headshot to 7.5 x 8.45. Open a blank file and make it an 8x10 at
whatever resolution you want, I usually use 300 dpi cause thats all most
printers really recognize even if it says 1440x2880.

re-res your headshot file to match your blank page so it should now say 7.5
x 8.45 at 300 pdi, now drag it to the new blank file and position it. add
your type at the bottom. flatten.

before you flatten you could hit the f/x link at the bottom of your layer's
pallet and give it a beveled edge or a stroked edge which will put a thin
red (or other color) line around the image area, way cool.

this reply is echoed to the z-prophoto mailing list at yahoogroups.com


  #3  
Old December 18th 03, 05:24 PM
Millenium
external usenet poster
 
Posts: n/a
Default how to put the border around a headshot?

HI

Can you explain this process with more details. I have no idea still
of what needs to be done. thanks you


"zeitgeist" wrote in message news:[email protected]_s03...
Ok I took this headshot with a digital camera. Now i would like to
know, how i can put the border around it where i can put the name and
the contact info... so it look like a professional headshot.
I have photoshop 8. any ideas please.


crop your headshot to 7.5 x 8.45. Open a blank file and make it an 8x10 at
whatever resolution you want, I usually use 300 dpi cause thats all most
printers really recognize even if it says 1440x2880.

re-res your headshot file to match your blank page so it should now say 7.5
x 8.45 at 300 pdi, now drag it to the new blank file and position it. add
your type at the bottom. flatten.

before you flatten you could hit the f/x link at the bottom of your layer's
pallet and give it a beveled edge or a stroked edge which will put a thin
red (or other color) line around the image area, way cool.

this reply is echoed to the z-prophoto mailing list at yahoogroups.com

  #4  
Old December 18th 03, 05:28 PM
JIM
external usenet poster
 
Posts: n/a
Default how to put the border around a headshot?

"Millenium" wrote in message
om...
Ok I took this headshot with a digital camera. Now i would like to
know, how i can put the border around it where i can put the name and
the contact info... so it look like a professional headshot.
I have photoshop 8. any ideas please.


You could just use the image resize options. First size the image down by
whatever border width amount you want then just manipulate the canvas size
to the finished size you want. Just be sure to set the canvas color first by
selecting the desired background color. You can then add text, etc..

Shoot'em up, bordered or not, Agfa, Fuji, Kodak and all the rest will love
you for it!!

Jim


  #5  
Old December 18th 03, 07:26 PM
J C
external usenet poster
 
Posts: n/a
Default how to put the border around a headshot?

On Thu, 18 Dec 2003 04:43:53 GMT, "zeitgeist"
wrote:



I usually use 300 dpi cause thats all most
printers really recognize even if it says 1440x2880.


To the original poster, increase the canvas size of the image. Take a
look at how to do that in the manual; its on one of the PS menus,
something like Image/Canvas Size... to get even borders all around,
click the middle box in the image that is presented in the dialog box
that pops up.

To Zeitgeist, you should know that your statement above is actually
incorrect. The resolution of a digital image and the resolution with
which an inkjet prints are two different things. So there's actually a
better reason for not creating digital images over 300 dpi.


-- JC
  #6  
Old December 19th 03, 04:28 AM
Millenium
external usenet poster
 
Posts: n/a
Default how to put the border around a headshot?

I resized the pic, and added the white canvas to it at 8x10, now how i
put the border around the pic, to separate it from the white? and how
i add the text to the canvas?


thanks
  #7  
Old December 19th 03, 12:11 PM
shutterbug
external usenet poster
 
Posts: n/a
Default how to put the border around a headshot?

http://www.amazon.com/exec/obidos/tg...glance&s=books


  #8  
Old December 20th 03, 07:03 AM
JIM
external usenet poster
 
Posts: n/a
Default how to put the border around a headshot?

"Millenium" wrote in message
om...
I resized the pic, and added the white canvas to it at 8x10, now how i
put the border around the pic, to separate it from the white? and how
i add the text to the canvas?


If your picture is smaller than the 8x10 canvas, the white area is the
border. In the tool selection area, select the 'T' for text. You can then
place the text box anywhere, on the white border or even on the picture
itself. Change font size and color as desired.

Jim


  #9  
Old December 20th 03, 07:05 AM
zeitgeist
external usenet poster
 
Posts: n/a
Default how to put the border around a headshot?


"Millenium" wrote in message
om...
HI

Can you explain this process with more details. I have no idea still
of what needs to be done. thanks you




do you know how to crop an image?

do you know how to set an image size?
do you know how to change canvas size?

do you have photoshop, or paintshop or any image editor?


Ok I took this headshot with a digital camera. Now i would like to
know, how i can put the border around it where i can put the name and
the contact info... so it look like a professional headshot.
I have photoshop 8. any ideas please.


crop your headshot to 7.5 x 8.45. Open a blank file and make it an

8x10 at
whatever resolution you want, I usually use 300 dpi cause thats all most
printers really recognize even if it says 1440x2880.

re-res your headshot file to match your blank page so it should now say

7.5
x 8.45 at 300 pdi, now drag it to the new blank file and position it.

add
your type at the bottom. flatten.

before you flatten you could hit the f/x link at the bottom of your

layer's
pallet and give it a beveled edge or a stroked edge which will put a

thin
red (or other color) line around the image area, way cool.

this reply is echoed to the z-prophoto mailing list at yahoogroups.com



  #10  
Old December 23rd 03, 05:01 PM
Millenium
external usenet poster
 
Posts: n/a
Default how to put the border around a headshot?

here is an example of the frame i want to put around my headshot.. any
idea of how to do it with photoshop 8?

http://www.graphicreproductions.com/4.htm
thankds
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
full frame 35mm display k In The Darkroom 17 April 3rd 04 04:23 AM


All times are GMT +1. The time now is 01:00 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright 2004-2021 PhotoBanter.com.
The comments are property of their posters.