![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
Greetings All
I Found a used Zone VI Washer 11x14 at a local camera store. In pretty good shape at a good price. Seems to work fine but what's the purpose of the two spare acrylic sheets that came with it ?? They're about 17" X 4 1/2" but don't seem to fit anywhere in the washer unless I remove some print dividers. Any brilliant ideas ?? Thanks All..Jef |
#2
|
|||
|
|||
![]()
Jeff Neale wrote:
Greetings All I Found a used Zone VI Washer 11x14 at a local camera store. In pretty good shape at a good price. Seems to work fine but what's the purpose of the two spare acrylic sheets that came with it ?? They're about 17" X 4 1/2" but don't seem to fit anywhere in the washer unless I remove some print dividers. Any brilliant ideas ?? Thanks All..Jef IIRC, they were so you could remove all the dividers, and you put those things in. Then you could put one of their negative washer baskets in there with the sheet film in the basket for washing sheet film. I never bought the basket or thought of washing negatives in there. For paper, the slow water flow rate is appropriate, but I prefer a much faster water flow rate for washing negatives. IIRC, Kodak recommend 6 changes an hour, but I may be mistaken. I generally wash the negatives in the developping tank and have about one change per minute for 10 minutes. I fill the tank with the negatives in there, jiggle the reels a little and dump it. Then I let it refill and wash 5 minutes. Then I dump it, let it refill, and wash another 5 minutes. This after one minute in KHCA, or course. -- .~. Jean-David Beyer Registered Linux User 85642. /V\ Registered Machine 241939. /( )\ Shrewsbury, New Jersey http://counter.li.org ^^-^^ 16:05:00 up 10 days, 12:20, 5 users, load average: 4.22, 4.13, 3.43 |
#4
|
|||
|
|||
![]()
Alexis Neel wrote:
(Jeff Neale) wrote in message om... Greetings All I Found a used Zone VI Washer 11x14 at a local camera store. In pretty good shape at a good price. Seems to work fine but what's the purpose of the two spare acrylic sheets that came with it ?? They're about 17" X 4 1/2" but don't seem to fit anywhere in the washer unless I remove some print dividers. Any brilliant ideas ?? Thanks All..Jef I'm pretty sure one is used to lay on top of the vertical pieces when it is full of prints and washing. The print edges have a tendency to rise a little bit out of the water, and thats what it is used for....to "hold them down". At least I have 2 similar things for my 16x20 and 20x24 ZoneVI washers. No. It is true that such a thing is supplied with new washers, but I believe the O.P. is talking about the thing you get a pair of with each washer. I do not believe I have ever unwrapped them. -- .~. Jean-David Beyer Registered Linux User 85642. /V\ Registered Machine 241939. /( )\ Shrewsbury, New Jersey http://counter.li.org ^^-^^ 21:40:00 up 10 days, 17:55, 5 users, load average: 4.21, 4.19, 4.21 |
#5
|
|||
|
|||
![]()
"Jeff Neale" wrote:
Greetings All I Found a used Zone VI Washer 11x14 at a local camera store. In pretty good shape at a good price. Seems to work fine but what's the purpose of the two spare acrylic sheets that came with it ?? They're about 17" X 4 1/2" but don't seem to fit anywhere in the washer unless I remove some print dividers. Any brilliant ideas ?? Thanks All..Jef I have the same print washer. Yes the short sheets are intended to support the sheet film washer (submerged) or for stacking roll film reels. To use them you remove as many standard dividers as is necessary. The Zone VI catalog says: "With dividers removed, any of our print washers can be used for archival washing of film on reels". I usually stack reels, up to (3) deep, on the inserted short sheets. About 15-18 reels can be accommodated this way. I've used it since'82 and it works fine. Doug |
#6
|
|||
|
|||
![]()
On 11 Apr 2004 11:35:30 -0700, (Jeff Neale) wrote:
Greetings All I Found a used Zone VI Washer 11x14 at a local camera store. In pretty good shape at a good price. Seems to work fine but what's the purpose of the two spare acrylic sheets that came with it ?? They're about 17" X 4 1/2" but don't seem to fit anywhere in the washer unless I remove some print dividers. Any brilliant ideas ?? Thanks All..Jef Don't these replace a pair of dividers so that you can drape a 16X20 across multiple slots ? Regards, John S. Douglas, Photographer - http://www.darkroompro.com Please remove the "_" when replying via email |
#7
|
|||
|
|||
![]() |
Thread Tools | |
Display Modes | |
|
|