If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Recommendations needed for flat-panel and CRT monitors for photo work?
My excellent Sony 20" CRT is gradually giving up the ghost; it has
dimmed enough over the past two months that I no longer trust it for photo work, and so I've suspended my scanning activities until I can replace it. I'm very interested in hearing recommendations for a new monitor. I want a monitor that is well suited to precision photo work, and it _must_ support at least 1600x1200 pixels at at least 60-70 Hz refresh. It must have standard analog inputs compatible with my existing NVidia video card. The monitor should be a 20" model (or a 19" viewing area minimum). It must be able to resolve individual pixels on the screen at 1600x1200. I'm interested in both flat-panel and CRT monitors. Traditionally I've looked to CRTs for the very best quality for photo work (and I'd still love to have a Sony Artisan, but I doubt if I can afford that now), but I'm wondering how much the flat panels have improved. My CRT is slipping so fast that just about anything would be better, I suppose. I'd like recommendations based mainly on quality and reliability, and also on both of these with respect to price (price/performance). Have manufacturers succeeded in consistently producing large flat-panels without defective pixels yet? -- Transpose hotmail and mxsmanic in my e-mail address to reach me directly. |
#2
|
|||
|
|||
"Mxsmanic" wrote in message ...
My excellent Sony 20" CRT is gradually giving up the ghost; it has dimmed enough over the past two months that I no longer trust it for photo work, and so I've suspended my scanning activities until I can replace it. I'm very interested in hearing recommendations for a new monitor. I want a monitor that is well suited to precision photo work, and it _must_ support at least 1600x1200 pixels at at least 60-70 Hz refresh. It must have standard analog inputs compatible with my existing NVidia video card. The monitor should be a 20" model (or a 19" viewing area minimum). It must be able to resolve individual pixels on the screen at 1600x1200. I'm interested in both flat-panel and CRT monitors. Traditionally I've looked to CRTs for the very best quality for photo work (and I'd still love to have a Sony Artisan, but I doubt if I can afford that now), but I'm wondering how much the flat panels have improved. My CRT is slipping so fast that just about anything would be better, I suppose. I'd like recommendations based mainly on quality and reliability, and also on both of these with respect to price (price/performance). Price/performance-wise, even though LCDs have improved over the past few years, still nothing touches Mitsubishi's Diamondtron CRT. Their 22" 2070 is ~$700. To get the same color gamut on an LCD costs 3x as much, or more. Not to mention a CRT's resolution and refresh rate flexibility, which cannot be had on an LCD at any price. Mike |
#3
|
|||
|
|||
"Mxsmanic" wrote in message ...
My excellent Sony 20" CRT is gradually giving up the ghost; it has dimmed enough over the past two months that I no longer trust it for photo work, and so I've suspended my scanning activities until I can replace it. I'm very interested in hearing recommendations for a new monitor. I want a monitor that is well suited to precision photo work, and it _must_ support at least 1600x1200 pixels at at least 60-70 Hz refresh. It must have standard analog inputs compatible with my existing NVidia video card. The monitor should be a 20" model (or a 19" viewing area minimum). It must be able to resolve individual pixels on the screen at 1600x1200. I'm interested in both flat-panel and CRT monitors. Traditionally I've looked to CRTs for the very best quality for photo work (and I'd still love to have a Sony Artisan, but I doubt if I can afford that now), but I'm wondering how much the flat panels have improved. My CRT is slipping so fast that just about anything would be better, I suppose. I'd like recommendations based mainly on quality and reliability, and also on both of these with respect to price (price/performance). Price/performance-wise, even though LCDs have improved over the past few years, still nothing touches Mitsubishi's Diamondtron CRT. Their 22" 2070 is ~$700. To get the same color gamut on an LCD costs 3x as much, or more. Not to mention a CRT's resolution and refresh rate flexibility, which cannot be had on an LCD at any price. Mike |
#4
|
|||
|
|||
Personally I think you should invest in monitor like in speakers for your
stereo system. The speakers on your stereo system are literally what you hear - you don't hear the DVD player or the receiver, etc. Within limits and unless you have very discriminating ears and are a real audiophile, the impact of receiver and other electronics are nothing next to the speakers' quality. Also, everyone has different ideas about what sounds good to them. Same thing, in my mind, applies to monitors. The process/box/memory needs to meet certain minimum standards (depending on use) but after that I would say it doesn't matter much. But that is not true of the monitor. Go to the store, take a look, try to get the salespeople to display from a CD a jpeg file that you KNOW should look a certain way. See what YOU prefer. If you want that Sony, GET IT. It will be with you for years, the 100s of dollars different it might cost you now are nothing compared to the enjoyment and satisfaction you will get over the years because you bought the right display that was perfect, in your mind, for your use and application. "Mxsmanic" wrote in message ... My excellent Sony 20" CRT is gradually giving up the ghost; it has dimmed enough over the past two months that I no longer trust it for photo work, and so I've suspended my scanning activities until I can replace it. I'm very interested in hearing recommendations for a new monitor. I want a monitor that is well suited to precision photo work, and it _must_ support at least 1600x1200 pixels at at least 60-70 Hz refresh. It must have standard analog inputs compatible with my existing NVidia video card. The monitor should be a 20" model (or a 19" viewing area minimum). It must be able to resolve individual pixels on the screen at 1600x1200. I'm interested in both flat-panel and CRT monitors. Traditionally I've looked to CRTs for the very best quality for photo work (and I'd still love to have a Sony Artisan, but I doubt if I can afford that now), but I'm wondering how much the flat panels have improved. My CRT is slipping so fast that just about anything would be better, I suppose. I'd like recommendations based mainly on quality and reliability, and also on both of these with respect to price (price/performance). Have manufacturers succeeded in consistently producing large flat-panels without defective pixels yet? -- Transpose hotmail and mxsmanic in my e-mail address to reach me directly. |
#5
|
|||
|
|||
Personally I think you should invest in monitor like in speakers for your
stereo system. The speakers on your stereo system are literally what you hear - you don't hear the DVD player or the receiver, etc. Within limits and unless you have very discriminating ears and are a real audiophile, the impact of receiver and other electronics are nothing next to the speakers' quality. Also, everyone has different ideas about what sounds good to them. Same thing, in my mind, applies to monitors. The process/box/memory needs to meet certain minimum standards (depending on use) but after that I would say it doesn't matter much. But that is not true of the monitor. Go to the store, take a look, try to get the salespeople to display from a CD a jpeg file that you KNOW should look a certain way. See what YOU prefer. If you want that Sony, GET IT. It will be with you for years, the 100s of dollars different it might cost you now are nothing compared to the enjoyment and satisfaction you will get over the years because you bought the right display that was perfect, in your mind, for your use and application. "Mxsmanic" wrote in message ... My excellent Sony 20" CRT is gradually giving up the ghost; it has dimmed enough over the past two months that I no longer trust it for photo work, and so I've suspended my scanning activities until I can replace it. I'm very interested in hearing recommendations for a new monitor. I want a monitor that is well suited to precision photo work, and it _must_ support at least 1600x1200 pixels at at least 60-70 Hz refresh. It must have standard analog inputs compatible with my existing NVidia video card. The monitor should be a 20" model (or a 19" viewing area minimum). It must be able to resolve individual pixels on the screen at 1600x1200. I'm interested in both flat-panel and CRT monitors. Traditionally I've looked to CRTs for the very best quality for photo work (and I'd still love to have a Sony Artisan, but I doubt if I can afford that now), but I'm wondering how much the flat panels have improved. My CRT is slipping so fast that just about anything would be better, I suppose. I'd like recommendations based mainly on quality and reliability, and also on both of these with respect to price (price/performance). Have manufacturers succeeded in consistently producing large flat-panels without defective pixels yet? -- Transpose hotmail and mxsmanic in my e-mail address to reach me directly. |
#6
|
|||
|
|||
Interesting, while a CRT does have inherently higher resolution and more
flexible resolution than LCD, with LCD there is as far as I know NO issue on refresh rate - is not applicable to LCDs. The picture I've seen on LCDs is always rock-steady. NEVER have observed ANY flickering. "Michael" wrote in message ... "Mxsmanic" wrote in message ... My excellent Sony 20" CRT is gradually giving up the ghost; it has dimmed enough over the past two months that I no longer trust it for photo work, and so I've suspended my scanning activities until I can replace it. I'm very interested in hearing recommendations for a new monitor. I want a monitor that is well suited to precision photo work, and it _must_ support at least 1600x1200 pixels at at least 60-70 Hz refresh. It must have standard analog inputs compatible with my existing NVidia video card. The monitor should be a 20" model (or a 19" viewing area minimum). It must be able to resolve individual pixels on the screen at 1600x1200. I'm interested in both flat-panel and CRT monitors. Traditionally I've looked to CRTs for the very best quality for photo work (and I'd still love to have a Sony Artisan, but I doubt if I can afford that now), but I'm wondering how much the flat panels have improved. My CRT is slipping so fast that just about anything would be better, I suppose. I'd like recommendations based mainly on quality and reliability, and also on both of these with respect to price (price/performance). Price/performance-wise, even though LCDs have improved over the past few years, still nothing touches Mitsubishi's Diamondtron CRT. Their 22" 2070 is ~$700. To get the same color gamut on an LCD costs 3x as much, or more. Not to mention a CRT's resolution and refresh rate flexibility, which cannot be had on an LCD at any price. Mike |
#7
|
|||
|
|||
Interesting, while a CRT does have inherently higher resolution and more
flexible resolution than LCD, with LCD there is as far as I know NO issue on refresh rate - is not applicable to LCDs. The picture I've seen on LCDs is always rock-steady. NEVER have observed ANY flickering. "Michael" wrote in message ... "Mxsmanic" wrote in message ... My excellent Sony 20" CRT is gradually giving up the ghost; it has dimmed enough over the past two months that I no longer trust it for photo work, and so I've suspended my scanning activities until I can replace it. I'm very interested in hearing recommendations for a new monitor. I want a monitor that is well suited to precision photo work, and it _must_ support at least 1600x1200 pixels at at least 60-70 Hz refresh. It must have standard analog inputs compatible with my existing NVidia video card. The monitor should be a 20" model (or a 19" viewing area minimum). It must be able to resolve individual pixels on the screen at 1600x1200. I'm interested in both flat-panel and CRT monitors. Traditionally I've looked to CRTs for the very best quality for photo work (and I'd still love to have a Sony Artisan, but I doubt if I can afford that now), but I'm wondering how much the flat panels have improved. My CRT is slipping so fast that just about anything would be better, I suppose. I'd like recommendations based mainly on quality and reliability, and also on both of these with respect to price (price/performance). Price/performance-wise, even though LCDs have improved over the past few years, still nothing touches Mitsubishi's Diamondtron CRT. Their 22" 2070 is ~$700. To get the same color gamut on an LCD costs 3x as much, or more. Not to mention a CRT's resolution and refresh rate flexibility, which cannot be had on an LCD at any price. Mike |
#8
|
|||
|
|||
Granted, refresh rate is not an issue for still photography work,
but certainly is for video. Ghosting is still a problem on most LCDs. "Dave" wrote in message ... Interesting, while a CRT does have inherently higher resolution and more flexible resolution than LCD, with LCD there is as far as I know NO issue on refresh rate - is not applicable to LCDs. The picture I've seen on LCDs is always rock-steady. NEVER have observed ANY flickering. "Michael" wrote in message ... "Mxsmanic" wrote in message ... My excellent Sony 20" CRT is gradually giving up the ghost; it has dimmed enough over the past two months that I no longer trust it for photo work, and so I've suspended my scanning activities until I can replace it. I'm very interested in hearing recommendations for a new monitor. I want a monitor that is well suited to precision photo work, and it _must_ support at least 1600x1200 pixels at at least 60-70 Hz refresh. It must have standard analog inputs compatible with my existing NVidia video card. The monitor should be a 20" model (or a 19" viewing area minimum). It must be able to resolve individual pixels on the screen at 1600x1200. I'm interested in both flat-panel and CRT monitors. Traditionally I've looked to CRTs for the very best quality for photo work (and I'd still love to have a Sony Artisan, but I doubt if I can afford that now), but I'm wondering how much the flat panels have improved. My CRT is slipping so fast that just about anything would be better, I suppose. I'd like recommendations based mainly on quality and reliability, and also on both of these with respect to price (price/performance). Price/performance-wise, even though LCDs have improved over the past few years, still nothing touches Mitsubishi's Diamondtron CRT. Their 22" 2070 is ~$700. To get the same color gamut on an LCD costs 3x as much, or more. Not to mention a CRT's resolution and refresh rate flexibility, which cannot be had on an LCD at any price. Mike |
#9
|
|||
|
|||
Granted, refresh rate is not an issue for still photography work,
but certainly is for video. Ghosting is still a problem on most LCDs. "Dave" wrote in message ... Interesting, while a CRT does have inherently higher resolution and more flexible resolution than LCD, with LCD there is as far as I know NO issue on refresh rate - is not applicable to LCDs. The picture I've seen on LCDs is always rock-steady. NEVER have observed ANY flickering. "Michael" wrote in message ... "Mxsmanic" wrote in message ... My excellent Sony 20" CRT is gradually giving up the ghost; it has dimmed enough over the past two months that I no longer trust it for photo work, and so I've suspended my scanning activities until I can replace it. I'm very interested in hearing recommendations for a new monitor. I want a monitor that is well suited to precision photo work, and it _must_ support at least 1600x1200 pixels at at least 60-70 Hz refresh. It must have standard analog inputs compatible with my existing NVidia video card. The monitor should be a 20" model (or a 19" viewing area minimum). It must be able to resolve individual pixels on the screen at 1600x1200. I'm interested in both flat-panel and CRT monitors. Traditionally I've looked to CRTs for the very best quality for photo work (and I'd still love to have a Sony Artisan, but I doubt if I can afford that now), but I'm wondering how much the flat panels have improved. My CRT is slipping so fast that just about anything would be better, I suppose. I'd like recommendations based mainly on quality and reliability, and also on both of these with respect to price (price/performance). Price/performance-wise, even though LCDs have improved over the past few years, still nothing touches Mitsubishi's Diamondtron CRT. Their 22" 2070 is ~$700. To get the same color gamut on an LCD costs 3x as much, or more. Not to mention a CRT's resolution and refresh rate flexibility, which cannot be had on an LCD at any price. Mike |
#10
|
|||
|
|||
Michael writes:
Price/performance-wise, even though LCDs have improved over the past few years, still nothing touches Mitsubishi's Diamondtron CRT. Their 22" 2070 is ~$700. Are you talking about just this specific model, or all the related Diamondtron models? I've always bought Sony, but I see that these Mitsubishi CRTs seem to be widely appreciated. Do they age gracefully (no blurring or distortion as they get older)? My Sony's only real problem is that it's going dim--the resolution and sharpness and convergence and geometry have barely changed at all. To get the same color gamut on an LCD costs 3x as much, or more. So I've noticed. Not to mention a CRT's resolution and refresh rate flexibility, which cannot be had on an LCD at any price. Yes. My other concern, though, is just putting the CRT into place. A huge cube half a metre on a side weighing 30 kg is a lot to manipulate by oneself, especially when it must be placed on the corner of a desk (hard to avoid bending over in that case, and bending over with a heavy weight is very risky). -- Transpose hotmail and mxsmanic in my e-mail address to reach me directly. |
Thread Tools | |
Display Modes | |
|
|