If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
CHDK firmware on a Canon Powershot a720
Hi. I'm having a bit of a problem trying to load CHDK firmware on my new Canon Powershot a720. The version I'm trying to install can be found he http://malbe.nm.ru/chdk/ I try to follow the instructions listed he http://chdk.wikia.com/wiki/FAQ But when I put the specified files in the root folder of the SD card (having formatted the 1 GB card prior to that step in the camera) and I start up in play mode, there is still no option in the menu to load the firmware. Does anyone know what I'm doing wrong or how to get the firmware loaded properly? Kind regards and thanks in advance for any suggestions, Niek |
#2
|
|||
|
|||
CHDK firmware on a Canon Powershot a720
On 11 feb, 21:25, sobriquet wrote:
Hi. I'm having a bit of a problem trying to load CHDK firmware on my new Canon Powershot a720. The version I'm trying to install can be found hehttp://malbe.nm.ru/chdk/ I try to follow the instructions listed hehttp://chdk.wikia.com/wiki/FAQ But when I put the specified files in the root folder of the SD card (having formatted the 1 GB card prior to that step in the camera) and I start up in play mode, there is still no option in the menu to load the firmware. Does anyone know what I'm doing wrong or how to get the firmware loaded properly? Kind regards and thanks in advance for any suggestions, Niek Nevermind.. I think I managed to circumvent the issue by simply locking the SD card so the firmware is loaded automatically. It seems to work fine. |
#3
|
|||
|
|||
CHDK firmware on a Canon Powershot a720
On Mon, 11 Feb 2008 13:13:16 -0800 (PST), sobriquet
wrote: On 11 feb, 21:25, sobriquet wrote: Hi. I'm having a bit of a problem trying to load CHDK firmware on my new Canon Powershot a720. The version I'm trying to install can be found hehttp://malbe.nm.ru/chdk/ I try to follow the instructions listed hehttp://chdk.wikia.com/wiki/FAQ But when I put the specified files in the root folder of the SD card (having formatted the 1 GB card prior to that step in the camera) and I start up in play mode, there is still no option in the menu to load the firmware. Does anyone know what I'm doing wrong or how to get the firmware loaded properly? Kind regards and thanks in advance for any suggestions, Niek Nevermind.. I think I managed to circumvent the issue by simply locking the SD card so the firmware is loaded automatically. It seems to work fine. How do you erase images that are no longer required? Do you have to unlock, erase them, then lock again to safeguard the hack. |
#4
|
|||
|
|||
CHDK firmware on a Canon Powershot a720
On 12 feb, 01:27, irwell wrote:
On Mon, 11 Feb 2008 13:13:16 -0800 (PST), sobriquet wrote: On 11 feb, 21:25, sobriquet wrote: Hi. I'm having a bit of a problem trying to load CHDK firmware on my new Canon Powershot a720. The version I'm trying to install can be found hehttp://malbe.nm.ru/chdk/ I try to follow the instructions listed hehttp://chdk.wikia.com/wiki/FAQ But when I put the specified files in the root folder of the SD card (having formatted the 1 GB card prior to that step in the camera) and I start up in play mode, there is still no option in the menu to load the firmware. Does anyone know what I'm doing wrong or how to get the firmware loaded properly? Kind regards and thanks in advance for any suggestions, Niek Nevermind.. I think I managed to circumvent the issue by simply locking the SD card so the firmware is loaded automatically. It seems to work fine. *How do you erase images that are no longer required? Do you have to unlock, erase them, then lock again to safeguard the hack.- Tekst uit oorspronkelijk bericht niet weergeven - - Tekst uit oorspronkelijk bericht weergeven - No, despite the lock on the card, you can erase images on the card from the camera. Very conveniently in fact, because you can use the filebrowser from the hacked firmware. It only refuses to delete them if you try to erase them from a memory card reader while the card is locked. |
#5
|
|||
|
|||
CHDK firmware on a Canon Powershot a720
In message
, sobriquet writes On 12 feb, 01:27, irwell wrote: On Mon, 11 Feb 2008 13:13:16 -0800 (PST), sobriquet Nevermind.. I think I managed to circumvent the issue by simply locking the SD card so the firmware is loaded automatically. It seems to work fine. *How do you erase images that are no longer required? No, despite the lock on the card, you can erase images on the card from the camera. The "lock" on an SD card is not a real write-protect wired into a switch, it's a tab whose position the SD card socket can read as "locked" or "not locked" (a bit like the write-protect tab on a floppy disc). It's up to software in the camera or card reader to decide whether to permit write/erase operations on the SD card, and the tab can be overridden if necessary. From what I understand the CHDK software treats the "lock" position as a further verification that this card is to be used in CHDK mode, and it will write data and erase the card as necessary. Once you pull the card out and put it into an external card reader or similar, the lock tab's position will be honoured so if you then want to erase or write new data to the card you need to reset the tab position. -- To reply, my gmail address is nojay1 Robert Sneddon |
#6
|
|||
|
|||
CHDK firmware on a Canon Powershot a720
On Mon, 11 Feb 2008 13:13:16 -0800 (PST), sobriquet
wrote: On 11 feb, 21:25, sobriquet wrote: Hi. I'm having a bit of a problem trying to load CHDK firmware on my new Canon Powershot a720. The version I'm trying to install can be found hehttp://malbe.nm.ru/chdk/ I try to follow the instructions listed hehttp://chdk.wikia.com/wiki/FAQ But when I put the specified files in the root folder of the SD card (having formatted the 1 GB card prior to that step in the camera) and I start up in play mode, there is still no option in the menu to load the firmware. Does anyone know what I'm doing wrong or how to get the firmware loaded properly? Kind regards and thanks in advance for any suggestions, Niek Nevermind.. I think I managed to circumvent the issue by simply locking the SD card so the firmware is loaded automatically. It seems to work fine. Thanks for the links, have managed to install it all on my Canon SD1000, loads of info there, the RAW feature is nice. |
#7
|
|||
|
|||
CHDK firmware on a Canon Powershot a720
On Feb 11, 4:13 pm, sobriquet wrote:
On 11 feb, 21:25, sobriquet wrote: Hi. I'm having a bit of a problem trying to load CHDK firmware on my new Canon Powershot a720. The version I'm trying to install can be found hehttp://malbe.nm.ru/chdk/ I try to follow the instructions listed hehttp://chdk.wikia.com/wiki/FAQ But when I put the specified files in the root folder of the SD card (having formatted the 1 GB card prior to that step in the camera) and I start up in play mode, there is still no option in the menu to load the firmware. Does anyone know what I'm doing wrong or how to get the firmware loaded properly? Kind regards and thanks in advance for any suggestions, Niek Nevermind.. I think I managed to circumvent the issue by simply locking the SD card so the firmware is loaded automatically. It seems to work fine. where did you get the PS.fir file? According to the Wiki page, there're 2 files needed to copy over SD card: Q. How do I get CHDK onto my camera's SD memory card? A. Follow these steps: * Remove the SD card from your camera and put it in the card reader of your PC. * Copy the files PS.fir and Diskboot.bin into the root folder of your SD card. * If you are on a Mac, read and follow this link * Put the SD card back into the camera. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
CHDK Successfully Ported to Canon G7 Firmware v1.00g | KevenGaston | Digital Photography | 62 | October 22nd 07 02:42 PM |
Canon PowerShot S70 Firmware Update to Fix E51 Error | Scott | Digital Photography | 0 | October 16th 04 01:14 AM |
Firmware Upgrade for Canon Powershot S1 IS | Andrew Morris | Digital Photography | 54 | July 29th 04 09:16 PM |