If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#161
|
|||
|
|||
Finally got to the point where no new camera holds my interest(waiting for specific offering)
On 2019-01-10 04:12, Eric Stevens wrote:
On Wed, 9 Jan 2019 08:36:24 -0500, Alan Browne wrote: Its amazing what Google can produce. This is DxO's own account of the situation at: https://www.dxomark.com/dxomark-came...ol-and-scores/ "Dynamic range corresponds to the ratio between the highest brightness a camera can capture (saturation) and the lowest brightness it can capture (which is typically when noise becomes more important than the signal — that is, a signal-to-noise ratio below 0 dB). A value of 12 EV is excellent, with differences below 0.5 EV usually not noticeable. Dynamic range is an open scale." This appears to confirm that the situation is as I deduced: they are not testing the dynamic range as recorded in a raw file. They are testing the range that a camera can capture. i.e. it is the dynmaic range of the sensor. It is not the dynamic range of the raw file. It doesn't actually say that, however. How, specifically, are they bypassing the raw file to get the data? By measuring not the data in the file but the range of brightness that the camera can capture from their test set up. And where _specifically_ are they getting that data? What is the probe point? What is the probe? -- "2/3 of Donald Trump's wives were immigrants. Proof that we need immigrants to do jobs that most Americans wouldn't do." - unknown protester |
#162
|
|||
|
|||
Finally got to the point where no new camera holds my interest(waiting for specific offering)
On 2019-01-10 04:17, Eric Stevens wrote:
On Tue, 8 Jan 2019 08:32:40 -0500, Alan Browne wrote: On 2019-01-08 04:04, Eric Stevens wrote: On Mon, 7 Jan 2019 16:57:44 -0500, Alan Browne wrote: On 2019-01-07 16:19, Eric Stevens wrote: On Sun, 6 Jan 2019 10:13:09 -0500, Alan Browne wrote: On 2019-01-04 18:58, Eric Stevens wrote: On Fri, 4 Jan 2019 16:16:05 -0500, Alan Browne wrote: On 2019-01-02 04:16, Eric Stevens wrote: On Wed, 2 Jan 2019 07:48:13 +0000, RJH wrote: On 02/01/2019 01:38, nospam wrote: In article , Eric Stevens wrote: You are obviously wedded to 1 stop per bit. Why is that? math. Why for example can you not have 2 stops per bit, or pi stops per bit? As long as you scale the entire brightness range with the available 14 stops. because it doesn't work that way. think about what a stop means. FWIW, I don't follow the linearity - in fact I've often wondered why aperture, ISO and shutter speed aren't infinitely variable, especially with digital. This article takes me closer to understanding: https://expertphotography.com/understanding-fstops-stops-in-photography-exposure/ The author of that article is using 'stop' when he should be using 'exposure value'. But lets not get into that in this thread. It's confused enough already. :-) There is no difference at all between an EV and a stop of any of the three independent variables of ISO, exposure period and aperture. It may be hair-splitting but none of my lenses are calibrated in EVs. They most definitely are, and probably 1/2 or 1/3 steps of EV as well, [1] --- or possibly very fine steps in speed priority or auto modes. I bow to your superior knowledge of my equipment. Do your lenses have stops? Yes. Exactly. So they are indeed calibrated in EV. ([1] above). No. EVs can be deduced. See https://en.wikipedia.org/wiki/Exposure_value "In photography, exposure value (EV) is a number that represents a combination of a camera's shutter speed and f-number, such that all combinations that yield the same exposure have the same EV (for any fixed scene luminance)." Finding some convenient words doesn't obviate the facts. Your camera and lenses are calibrated in EV. What words are used (stops for example) do not matter at all. -- "2/3 of Donald Trump's wives were immigrants. Proof that we need immigrants to do jobs that most Americans wouldn't do." - unknown protester |
#163
|
|||
|
|||
Finally got to the point where no new camera holds my interest(waiting for specific offering)
On 2019-01-10 04:20, Eric Stevens wrote:
On Tue, 8 Jan 2019 08:38:02 -0500, Alan Browne wrote: On 2019-01-08 04:12, Eric Stevens wrote: On Mon, 07 Jan 2019 23:42:08 -0500, nospam wrote: In article , Eric Stevens wrote: It may be hair-splitting but none of my lenses are calibrated in EVs. They most definitely are, and probably 1/2 or 1/3 steps of EV as well, or possibly very fine steps in speed priority or auto modes. I bow to your superior knowledge of my equipment. your equipment is nothing special. many people have the same stuff. for modern lenses, it's user selectable at 1, 1/2 or 1/3 stops. not all options may be available on all cameras. it appears that nikon no longer offers 1 stop anymore (there's no reason to) but older nikon slrs did. i assume canon, pentax, etc., are similar. examples: https://www.imaging-resource.com/PRODS/D7000/screens/DSC_0211.jpg https://1.img-dpreview.com/files/p/a...ages/Captures/ d1x_41.gif http://www.steves-digicams.com/2004_reviews/d70/d70_custom_menu2.jpg for older lenses with a mechanical aperture ring (manual lenses and early autofocus), the aperture ring will normally click at 1 stop increments, sometimes 1/2 stop. occasionally, it's both on the same lens, i.e., the widest and smallest are 1 stop, rest 1/2 stop. there is no point in 1/3 stops since the mechanics aren't good enough. some lenses, such as mirror lenses, have only one f/stop, with no adjustments to be made, although they sometimes accept an nd filter in the back. This illustrates the disadvantage of not using the language with precision. As I said, all my lenses make use of f/numbers which are a measure of stops. Your thoughts have jumped the rails and are now talking about the intervals of Exposure Value of which the camera is capable. The exposure value may be used to set lens aperture, shutter speed or ISO. They are not identical to stops. EV's are equivalent to stops for any purpose related to exposure. I can change exposure value without changing the stop setting. No ****. That's sort of the point. -- "2/3 of Donald Trump's wives were immigrants. Proof that we need immigrants to do jobs that most Americans wouldn't do." - unknown protester |
#164
|
|||
|
|||
Finally got to the point where no new camera holds my interest(waiting for specific offering)
On 2019-01-10 04:22, Eric Stevens wrote:
On Tue, 08 Jan 2019 10:28:28 -0500, nospam wrote: In article , Eric Stevens wrote: It may be hair-splitting but none of my lenses are calibrated in EVs. They most definitely are, and probably 1/2 or 1/3 steps of EV as well, or possibly very fine steps in speed priority or auto modes. I bow to your superior knowledge of my equipment. your equipment is nothing special. many people have the same stuff. for modern lenses, it's user selectable at 1, 1/2 or 1/3 stops. not all options may be available on all cameras. it appears that nikon no longer offers 1 stop anymore (there's no reason to) but older nikon slrs did. i assume canon, pentax, etc., are similar. examples: https://www.imaging-resource.com/PRODS/D7000/screens/DSC_0211.jpg https://1.img-dpreview.com/files/p/a...ages/Captures/ d1x_41.gif http://www.steves-digicams.com/2004_reviews/d70/d70_custom_menu2.jpg for older lenses with a mechanical aperture ring (manual lenses and early autofocus), the aperture ring will normally click at 1 stop increments, sometimes 1/2 stop. occasionally, it's both on the same lens, i.e., the widest and smallest are 1 stop, rest 1/2 stop. there is no point in 1/3 stops since the mechanics aren't good enough. some lenses, such as mirror lenses, have only one f/stop, with no adjustments to be made, although they sometimes accept an nd filter in the back. This illustrates the disadvantage of not using the language with precision. As I said, all my lenses make use of f/numbers which are a measure of stops. Your thoughts have jumped the rails and are now talking about the intervals of Exposure Value of which the camera is capable. The exposure value may be used to set lens aperture, shutter speed or ISO. They are not identical to stops. they absolutely are. So I double the shutter speed. I have halved the exposure value but I haven't affected the stop setting. If you want to continue arguing to the contrary I will be happy to leave you to it. Reciprocity games. "Introduction to photography 101." -- "2/3 of Donald Trump's wives were immigrants. Proof that we need immigrants to do jobs that most Americans wouldn't do." - unknown protester |
#165
|
|||
|
|||
Finally got to the point where no new camera holds my interest (waiting for specific offering)
In article , Eric Stevens
wrote: This illustrates the disadvantage of not using the language with precision. As I said, all my lenses make use of f/numbers which are a measure of stops. Your thoughts have jumped the rails and are now talking about the intervals of Exposure Value of which the camera is capable. The exposure value may be used to set lens aperture, shutter speed or ISO. They are not identical to stops. they absolutely are. So I double the shutter speed. I have halved the exposure value but I haven't affected the stop setting. you are confusing f/stop with stop. you haven't affected the f/stop setting on the lens, but you *have* affected the exposure by 1 stop. If you want to continue arguing to the contrary I will be happy to leave you to it. translated: you have no idea what you're talking about and refuse to learn anything. |
#166
|
|||
|
|||
Finally got to the point where no new camera holds my interest (waiting for specific offering)
In article , Eric Stevens
wrote: This illustrates the disadvantage of not using the language with precision. As I said, all my lenses make use of f/numbers which are a measure of stops. Your thoughts have jumped the rails and are now talking about the intervals of Exposure Value of which the camera is capable. The exposure value may be used to set lens aperture, shutter speed or ISO. They are not identical to stops. EV's are equivalent to stops for any purpose related to exposure. I can change exposure value without changing the stop setting. you are confusing f/stop with stop. |
#167
|
|||
|
|||
Finally got to the point where no new camera holds my interest (waiting for specific offering)
In article , Eric Stevens
wrote: But a moot point IMO. I doubt the sensor mentioned has 14 bits of DR in the first place. Esp. once you account for noise. Well, DxO measure 14.3 but what exactly that means is unknown. But if they made that specific statement then I would expect they must have grounds. it means their test methodology is worthless or they're intentionally lying. Or that you have failed to understand what they are doing. Your other post ends with a statement to the effect that DxO don't say what their algorithms are doing, so nospam certainly didn't fail anything. nospam will fail to understand what they are doing if he doesn't know what they are doing. That applies to everyone. it's not me who is failing to understand what's going on. In the end physics is physics and there is no way they are getting more DR than the sensor offers. Not even the bit depth of it. According to nospam they are claiming a DR of 14.3 for the sensor of the D800. As they said in the link that I posted which has somehow got snipped "Maximum dynamic range is the greatest possible amplitude between light and dark details a given sensor can record ...". which is limited to 14 stops in an ideal world. in the real world, it's less. |
#168
|
|||
|
|||
Finally got to the point where no new camera holds my interest (waiting for specific offering)
In article , Eric Stevens
wrote: Theey do not specify their algorithms in the article. Exactly. So? the so is that you have no idea whether any of their algorithms are good or bad and how much they are influenced by cash. it's a very interesting algorithm when those who partner with dxo get better results than those who do not... for all anyone knows, they roll dice and whatever number comes up is the number they use... |
#169
|
|||
|
|||
Finally got to the point where no new camera holds my interest (waiting for specific offering)
In article , Eric Stevens
wrote: without knowing what their algorithms are, they're worthless. You undoubtedly use a large number of algorithms without knowing what they are. Nevertheless you must find them useful, otherwise you would not use them. not relevant to what dxo is doing. keep in mind that those algorithms aren't producing results that are mathematically impossible, and if any of them did, it would immediately become suspect. |
#170
|
|||
|
|||
Finally got to the point where no new camera holds my interest (waiting for specific offering)
In article , Alan Browne
wrote: without knowing what their algorithms are, they're worthless. You undoubtedly use a large number of algorithms without knowing what they are. Nevertheless you must find them useful, otherwise you would not use them. Since it doesn't pass a basic physics test, it's not trustable and should not be used. this. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Finally got to the point where no new camera holds my interest (waiting for specific offering) | Alfred Molon[_4_] | Digital Photography | 2 | December 24th 18 02:37 PM |
Please, tell me Zeiss's offering to the camera world won't be areskinned SONY!! | Neil[_9_] | Digital Photography | 1 | August 27th 18 01:00 PM |
Need a camera with specific features: | Gary Smiley | Digital Photography | 1 | May 22nd 06 02:31 AM |
Canon Offering $600+ Rebate on Digital Camera Equipment (3x Rebate Offers) | Mark | Digital Photography | 6 | November 4th 04 10:27 AM |