If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Don't hang your Nikon with one of those silly bottom straps
One of the silliest accessories ever invented. You camera spins around
like a watch on a chain. http://forums.dpreview.com/forums/post/50315414 |
#2
|
|||
|
|||
Don't hang your Nikon with one of those silly bottom straps
On Tue, 20 Nov 2012 00:29:54 -0600, Rich wrote:
: One of the silliest accessories ever invented. You camera spins around : like a watch on a chain. : : http://forums.dpreview.com/forums/post/50315414 I've never used one, but a lot of people say they do. I've never read or heard of this happening. Is the bottom of a D800 really so flimsy? You'd think that the tripod socket would be attached to the frame (if any), just on general principles. Bob |
#3
|
|||
|
|||
Don't hang your Nikon with one of those silly bottom straps
Robert Coe wrote in
: On Tue, 20 Nov 2012 00:29:54 -0600, Rich wrote: : One of the silliest accessories ever invented. You camera spins : around like a watch on a chain. : : http://forums.dpreview.com/forums/post/50315414 I've never used one, but a lot of people say they do. I've never read or heard of this happening. Is the bottom of a D800 really so flimsy? You'd think that the tripod socket would be attached to the frame (if any), just on general principles. Bob I don't know how Nikon does it, but some tripod sockets are nothing but thin stamped steel inserts that are attached to the bottom with two tiny screws. |
#4
|
|||
|
|||
Don't hang your Nikon with one of those silly bottom straps
On 2012-11-20 17:08:22 -0800, Rich said:
Robert Coe wrote in : On Tue, 20 Nov 2012 00:29:54 -0600, Rich wrote: : One of the silliest accessories ever invented. You camera spins : around like a watch on a chain. : : http://forums.dpreview.com/forums/post/50315414 I've never used one, but a lot of people say they do. I've never read or heard of this happening. Is the bottom of a D800 really so flimsy? You'd think that the tripod socket would be attached to the frame (if any), just on general principles. Bob I don't know how Nikon does it, but some tripod sockets are nothing but thin stamped steel inserts that are attached to the bottom with two tiny screws. I can say that with the MB-D10 battery grip, the tripod socket is internally supported with a metal plate which runs the entire width of the battery chamber. After 3+ years of abuse I see no evidence of deformation. As far as how the tripod socket is mounted in the D300S camera body goes, i can only guess that it is tapped into the alloy frame, or on a mounting plate attached to the frame, and not just attached with two tiny screws. I would hope the same applies to the D800. -- Regards, Savageduck |
#5
|
|||
|
|||
Don't hang your Nikon with one of those silly bottom straps
On 11/20/2012 9:08 PM, Savageduck wrote:
On 2012-11-20 17:08:22 -0800, Rich said: Robert Coe wrote in : On Tue, 20 Nov 2012 00:29:54 -0600, Rich wrote: : One of the silliest accessories ever invented. You camera spins : around like a watch on a chain. : : http://forums.dpreview.com/forums/post/50315414 I've never used one, but a lot of people say they do. I've never read or heard of this happening. Is the bottom of a D800 really so flimsy? You'd think that the tripod socket would be attached to the frame (if any), just on general principles. Bob I don't know how Nikon does it, but some tripod sockets are nothing but thin stamped steel inserts that are attached to the bottom with two tiny screws. I can say that with the MB-D10 battery grip, the tripod socket is internally supported with a metal plate which runs the entire width of the battery chamber. After 3+ years of abuse I see no evidence of deformation. As far as how the tripod socket is mounted in the D300S camera body goes, i can only guess that it is tapped into the alloy frame, or on a mounting plate attached to the frame, and not just attached with two tiny screws. I would hope the same applies to the D800. Me too, but I am not taking chances. -- Peter |
#6
|
|||
|
|||
Don't hang your Nikon with one of those silly bottom straps
On 2012-11-19 22:29:54 -0800, Rich said:
One of the silliest accessories ever invented. You camera spins around like a watch on a chain. http://forums.dpreview.com/forums/post/50315414 There has to be more to this story. I have been using a BlackRapid strap since 2009 with a D300+MB-D10 and a D300S+MB-D10. I have never had this sort of issue. In my case the BlackRapid strap is attached to the MB-D10 not the camera. However I have no doubt that the D300S frame, or tripod socket bottom plate, would not be damaged in the way described above. As far as being the "One of the silliest accessories ever invented." I consider it one of the greatest. The weight of a D300S+MB-D10 (probably more weight there than a D600 or D800 without battery grip) on a standard neck strap is literally "a pain in the neck". When the camera isn't up at my eye it is at my hip, but I always find myself holding the grip ready to swing it back into action. For whatever reason I very seldom let it swing free as I always take into account the possibility of impact with a stationary object. The BlackRapid strap has made a day out shooting pleasurable, and I don't have that ache in my neck and back that was always there when using a neck strap. I believe we have at least one other BR strap user in these photo-groups, PeterN, there are probably others. ....and I still believe the guy with the damaged D800 in the dpforums story hasn't told all. -- Regards, Savageduck |
#7
|
|||
|
|||
Don't hang your Nikon with one of those silly bottom straps
On 2012-11-20 09:23:46 -0800, Savageduck said:
On 2012-11-19 22:29:54 -0800, Rich said: One of the silliest accessories ever invented. You camera spins around like a watch on a chain. http://forums.dpreview.com/forums/post/50315414 There has to be more to this story. I have been using a BlackRapid strap since 2009 with a D300+MB-D10 and a D300S+MB-D10. I have never had this sort of issue. In my case the BlackRapid strap is attached to the MB-D10 not the camera. However I have no doubt that the D300S frame, or tripod socket bottom plate, would not be damaged in the way described above. As far as being the "One of the silliest accessories ever invented." I consider it one of the greatest. The weight of a D300S+MB-D10 (probably more weight there than a D600 or D800 without battery grip) on a standard neck strap is literally "a pain in the neck". When the camera isn't up at my eye it is at my hip, but I always find myself holding the grip ready to swing it back into action. For whatever reason I very seldom let it swing free as I always take into account the possibility of impact with a stationary object. The BlackRapid strap has made a day out shooting pleasurable, and I don't have that ache in my neck and back that was always there when using a neck strap. I believe we have at least one other BR strap user in these photo-groups, PeterN, there are probably others. ...and I still believe the guy with the damaged D800 in the dpforums story hasn't told all. I just checked the interior of my MB-D10 and there is a metal plate supporting the tripod mount. I do not know the type of metal, but I suspect that it is some sort of steel alloy. The BlackRapid strap has been in constant use on this D300S + MB-D10 since January 2010. I detect no distortion of any type. Here is a quick snapshot (a mite bit fuzzy) of that interior of the MB-D10, where you can see the mount and reinforcing plate. https://dl.dropbox.com/u/1295663/Fil...B-interior.JPG -- Regards, Savageduck |
#8
|
|||
|
|||
Don't hang your Nikon with one of those silly bottom straps
On 21/11/2012 5:49 AM, Savageduck wrote:
On 2012-11-20 09:23:46 -0800, Savageduck said: On 2012-11-19 22:29:54 -0800, Rich said: One of the silliest accessories ever invented. You camera spins around like a watch on a chain. http://forums.dpreview.com/forums/post/50315414 There has to be more to this story. I have been using a BlackRapid strap since 2009 with a D300+MB-D10 and a D300S+MB-D10. I have never had this sort of issue. In my case the BlackRapid strap is attached to the MB-D10 not the camera. However I have no doubt that the D300S frame, or tripod socket bottom plate, would not be damaged in the way described above. As far as being the "One of the silliest accessories ever invented." I consider it one of the greatest. The weight of a D300S+MB-D10 (probably more weight there than a D600 or D800 without battery grip) on a standard neck strap is literally "a pain in the neck". When the camera isn't up at my eye it is at my hip, but I always find myself holding the grip ready to swing it back into action. For whatever reason I very seldom let it swing free as I always take into account the possibility of impact with a stationary object. The BlackRapid strap has made a day out shooting pleasurable, and I don't have that ache in my neck and back that was always there when using a neck strap. I believe we have at least one other BR strap user in these photo-groups, PeterN, there are probably others. ...and I still believe the guy with the damaged D800 in the dpforums story hasn't told all. I just checked the interior of my MB-D10 and there is a metal plate supporting the tripod mount. I do not know the type of metal, but I suspect that it is some sort of steel alloy. The BlackRapid strap has been in constant use on this D300S + MB-D10 since January 2010. I detect no distortion of any type. Here is a quick snapshot (a mite bit fuzzy) of that interior of the MB-D10, where you can see the mount and reinforcing plate. https://dl.dropbox.com/u/1295663/Fil...B-interior.JPG I have pulled the bum out of an F5 which was mounted on a tripod and broken a strap lug attachment point out of the F4 body (80-200 2.8 attached) I stopped using battery bases on my D200 - became unreliable as it distorted from tripod mounting. Camera bodies ain't made to accommodate all things attached |
#9
|
|||
|
|||
Don't hang your Nikon with one of those silly bottom straps
Savageduck wrote:
On 2012-11-19 22:29:54 -0800, Rich said: One of the silliest accessories ever invented. You camera spins around like a watch on a chain. http://forums.dpreview.com/forums/post/50315414 There has to be more to this story. I have been using a BlackRapid strap since 2009 with a D300+MB-D10 and a D300S+MB-D10. I have never had this sort of issue. In my case the BlackRapid strap is attached to the MB-D10 not the camera. However I have no doubt that the D300S frame, or tripod socket bottom plate, would not be damaged in the way described above. As far as being the "One of the silliest accessories ever invented." I consider it one of the greatest. The weight of a D300S+MB-D10 (probably more weight there than a D600 or D800 without battery grip) on a standard neck strap is literally "a pain in the neck". When the camera isn't up at my eye it is at my hip, but I always find myself holding the grip ready to swing it back into action. For whatever reason I very seldom let it swing free as I always take into account the possibility of impact with a stationary object. The BlackRapid strap has made a day out shooting pleasurable, and I don't have that ache in my neck and back that was always there when using a neck strap. I believe we have at least one other BR strap user in these photo-groups, PeterN, there are probably others. ...and I still believe the guy with the damaged D800 in the dpforums story hasn't told all. The original poster was using a Sun Sniper strap. Seems to use a different and smaller method of attachment to body via tripod socket than the Black Rapid. The tripod thread is designed to take a plate which is pulled by the screw into the base of the camera thus distributing the bending moments over a larger area of the camera base. The size of the strap mounting plate may the crucial factor. I also note the force applied to the camera base by these straps is in the opposite direction to that applied by the camera sitting on a tripod. On a tripod the weight of the lens pushes the camera body down into the front of the baseplate. On a strap the lens weight pulls it away. Might it not be the case that Nikon have designed a tripod mounting area strong in that kind of typical front compression but weaker in tension? -- Chris Malcolm |
#10
|
|||
|
|||
Don't hang your Nikon with one of those silly bottom straps
On 2012.11.20 13:53 , Chris Malcolm wrote:
I also note the force applied to the camera base by these straps is in the opposite direction to that applied by the camera sitting on a tripod. On a tripod the weight of the lens pushes the camera body down into the front of the baseplate. On a strap the lens weight pulls it away. A "bad" (and useful, practical and convenient) practice is to carry a tripod with the camera and lens attached. Been doing that for over 20 years. In that case the camera body and lens weight are all through the tripod socket. I'm betting this guy pranged his camera on something and he isn't telling. -- "There were, unfortunately, no great principles on which parties were divided – politics became a mere struggle for office." -Sir John A. Macdonald |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Silly me! (Bracketing?) | Iceberg Concept, Inc. | Digital Photography | 0 | August 6th 06 04:29 PM |
FA>Nikon Caps - Hoods - Straps and UR-1 | Wade-Saunders | General Equipment For Sale | 0 | March 15th 05 12:34 AM |
silly question - is there a nikon D80 available anywhere yet? | C. Falise | Digital Photography | 1 | February 26th 05 11:44 PM |
D70 Silly Question | Himm | Digital SLR Cameras | 11 | January 22nd 05 05:39 AM |
silly question? | Dennis Bradley | Digital Photography | 22 | July 20th 04 12:29 AM |