|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
#1
April 6th 04, 03:24 PM
|
|||
|
|||
Geting started with RA4 printing
If it works then you are on your way. You don't really need a dichro
head to do color printing. A set of color printing filters will do just fine as long as there is a filter drawer in the enlarger. 
|
|
#2
April 6th 04, 03:45 PM
|
|||
|
|||
|
Geting started with RA4 printing
In article ,
Frank J. Schifano wrote: If it works then you are on your way. You don't really need a dichro head to do color printing. No you don't,.... your correct but its sure makes it alot more productive and fun -- LF website http://members.bellatlantic.net/~gblank For best results expand this window at least 6" at 1152 x 768 resolution
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
