A Photography forum. PhotoBanter.com

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PhotoBanter.com forum » General Photography » In The Darkroom
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Digital thermometer for water bath?



 
 
Thread Tools Display Modes
  #1  
Old September 6th 04, 03:21 AM
Nick Zentena
external usenet poster
 
Posts: n/a
Default Digital thermometer for water bath?


Anybody care to suggest something? Reasonably accurate. Reading in
1/10s of a degree [C and F]. Able to handle living in a water bath long
term. Costing less then the national debt.

My current one is likely on the way to the trash. It's a oven
thermomether designed to stuck in food. The problem is it's really reading
high right now. Maybe it'll dry out but I'm not too hopefull. If the probe
can't handle sitting in a 38 degree water bath how is it supposed to handle
an oven?

Nick
  #2  
Old September 6th 04, 03:58 AM
Alan Smithee
external usenet poster
 
Posts: n/a
Default

I tried to use the same thing. Adapting an el cheapo (~$10) digital
thermometer from the cooking department at the local big box store. It
lasted about a day before it fogged, got wet and shortly thereafter shorted
out and killed the battery. The replacement battery is more expensive that
the orginal thermometer! I'm using the tried and true analog therm still. I
think this is one of those "you get what you pay for" devices.

"Nick Zentena" wrote in message
...

Anybody care to suggest something? Reasonably accurate. Reading in
1/10s of a degree [C and F]. Able to handle living in a water bath long
term. Costing less then the national debt.

My current one is likely on the way to the trash. It's a oven
thermomether designed to stuck in food. The problem is it's really reading
high right now. Maybe it'll dry out but I'm not too hopefull. If the probe
can't handle sitting in a 38 degree water bath how is it supposed to

handle
an oven?

Nick



  #3  
Old September 6th 04, 03:58 AM
Alan Smithee
external usenet poster
 
Posts: n/a
Default

I tried to use the same thing. Adapting an el cheapo (~$10) digital
thermometer from the cooking department at the local big box store. It
lasted about a day before it fogged, got wet and shortly thereafter shorted
out and killed the battery. The replacement battery is more expensive that
the orginal thermometer! I'm using the tried and true analog therm still. I
think this is one of those "you get what you pay for" devices.

"Nick Zentena" wrote in message
...

Anybody care to suggest something? Reasonably accurate. Reading in
1/10s of a degree [C and F]. Able to handle living in a water bath long
term. Costing less then the national debt.

My current one is likely on the way to the trash. It's a oven
thermomether designed to stuck in food. The problem is it's really reading
high right now. Maybe it'll dry out but I'm not too hopefull. If the probe
can't handle sitting in a 38 degree water bath how is it supposed to

handle
an oven?

Nick



  #4  
Old September 6th 04, 06:00 AM
Jim Phelps
external usenet poster
 
Posts: n/a
Default


"Nick Zentena" wrote in message
...

Anybody care to suggest something? Reasonably accurate. Reading in
1/10s of a degree [C and F]. Able to handle living in a water bath long
term. Costing less then the national debt.

My current one is likely on the way to the trash. It's a oven
thermomether designed to stuck in food. The problem is it's really reading
high right now. Maybe it'll dry out but I'm not too hopefull. If the probe
can't handle sitting in a 38 degree water bath how is it supposed to
handle
an oven?

Nick


Nick,

If you care to try your luck with the German and the company, take a look
at this. Go to www.conrad.de and at the top of the page in the heading of
_Artiklesuche_ put in 120966 55 (won't let me generate a direct link -
sorry). This is a digital thermometer with 0.1C resolution and 0.1 +- 1
digit accuracy. Uses regular 9 volt batteries, so nothing special. Cost is
Euro 46 plus shipping (about $56 plus shipping). I'm about to grab one or
two myself. If you need help, give me an E-Mail address and I'll contact
you privately. I've helped out others the same way.

Jim




  #5  
Old September 6th 04, 06:00 AM
Jim Phelps
external usenet poster
 
Posts: n/a
Default


"Nick Zentena" wrote in message
...

Anybody care to suggest something? Reasonably accurate. Reading in
1/10s of a degree [C and F]. Able to handle living in a water bath long
term. Costing less then the national debt.

My current one is likely on the way to the trash. It's a oven
thermomether designed to stuck in food. The problem is it's really reading
high right now. Maybe it'll dry out but I'm not too hopefull. If the probe
can't handle sitting in a 38 degree water bath how is it supposed to
handle
an oven?

Nick


Nick,

If you care to try your luck with the German and the company, take a look
at this. Go to www.conrad.de and at the top of the page in the heading of
_Artiklesuche_ put in 120966 55 (won't let me generate a direct link -
sorry). This is a digital thermometer with 0.1C resolution and 0.1 +- 1
digit accuracy. Uses regular 9 volt batteries, so nothing special. Cost is
Euro 46 plus shipping (about $56 plus shipping). I'm about to grab one or
two myself. If you need help, give me an E-Mail address and I'll contact
you privately. I've helped out others the same way.

Jim




  #6  
Old September 6th 04, 06:00 AM
Jim Phelps
external usenet poster
 
Posts: n/a
Default


"Nick Zentena" wrote in message
...

Anybody care to suggest something? Reasonably accurate. Reading in
1/10s of a degree [C and F]. Able to handle living in a water bath long
term. Costing less then the national debt.

My current one is likely on the way to the trash. It's a oven
thermomether designed to stuck in food. The problem is it's really reading
high right now. Maybe it'll dry out but I'm not too hopefull. If the probe
can't handle sitting in a 38 degree water bath how is it supposed to
handle
an oven?

Nick


Nick,

If you care to try your luck with the German and the company, take a look
at this. Go to www.conrad.de and at the top of the page in the heading of
_Artiklesuche_ put in 120966 55 (won't let me generate a direct link -
sorry). This is a digital thermometer with 0.1C resolution and 0.1 +- 1
digit accuracy. Uses regular 9 volt batteries, so nothing special. Cost is
Euro 46 plus shipping (about $56 plus shipping). I'm about to grab one or
two myself. If you need help, give me an E-Mail address and I'll contact
you privately. I've helped out others the same way.

Jim




  #7  
Old September 6th 04, 01:12 PM
Nick Zentena
external usenet poster
 
Posts: n/a
Default

Alan Smithee wrote:
I tried to use the same thing. Adapting an el cheapo (~$10) digital
thermometer from the cooking department at the local big box store. It
lasted about a day before it fogged, got wet and shortly thereafter shorted
out and killed the battery. The replacement battery is more expensive that
the orginal thermometer! I'm using the tried and true analog therm still. I
think this is one of those "you get what you pay for" devices.



The only issue with mine is it's reading high. It was reading about 5C
high yesterday when I took the probe out of the bath to let it dry out. It
then started reading 30C high!. Nice big display. AAA battery. Min/Max
function. I've pulled the battery over night who knows maybe that'll fix it.

Nick
  #8  
Old September 6th 04, 01:12 PM
Nick Zentena
external usenet poster
 
Posts: n/a
Default

Alan Smithee wrote:
I tried to use the same thing. Adapting an el cheapo (~$10) digital
thermometer from the cooking department at the local big box store. It
lasted about a day before it fogged, got wet and shortly thereafter shorted
out and killed the battery. The replacement battery is more expensive that
the orginal thermometer! I'm using the tried and true analog therm still. I
think this is one of those "you get what you pay for" devices.



The only issue with mine is it's reading high. It was reading about 5C
high yesterday when I took the probe out of the bath to let it dry out. It
then started reading 30C high!. Nice big display. AAA battery. Min/Max
function. I've pulled the battery over night who knows maybe that'll fix it.

Nick
  #9  
Old September 6th 04, 01:19 PM
Nick Zentena
external usenet poster
 
Posts: n/a
Default

Jim Phelps wrote:


If you care to try your luck with the German and the company, take a look
at this. Go to www.conrad.de and at the top of the page in the heading of
_Artiklesuche_ put in 120966 55 (won't let me generate a direct link -
sorry). This is a digital thermometer with 0.1C resolution and 0.1 +- 1
digit accuracy. Uses regular 9 volt batteries, so nothing special. Cost is
Euro 46 plus shipping (about $56 plus shipping). I'm about to grab one or
two myself. If you need help, give me an E-Mail address and I'll contact
you privately. I've helped out others the same way.



I'm just worried about shipping-) Do you think that probe could handle
24/7 in the water? Shipping from Europe some times is wierd. I've had stuff
from France sent for less then shipping from the US. But shipping from the
UK seems like they buy the package a 1st class plane ticket-(.

Thanks
Nick
  #10  
Old September 6th 04, 01:19 PM
Nick Zentena
external usenet poster
 
Posts: n/a
Default

Jim Phelps wrote:


If you care to try your luck with the German and the company, take a look
at this. Go to www.conrad.de and at the top of the page in the heading of
_Artiklesuche_ put in 120966 55 (won't let me generate a direct link -
sorry). This is a digital thermometer with 0.1C resolution and 0.1 +- 1
digit accuracy. Uses regular 9 volt batteries, so nothing special. Cost is
Euro 46 plus shipping (about $56 plus shipping). I'm about to grab one or
two myself. If you need help, give me an E-Mail address and I'll contact
you privately. I've helped out others the same way.



I'm just worried about shipping-) Do you think that probe could handle
24/7 in the water? Shipping from Europe some times is wierd. I've had stuff
from France sent for less then shipping from the US. But shipping from the
UK seems like they buy the package a 1st class plane ticket-(.

Thanks
Nick
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Will digital photography ever stabilize? Alfred Molon Digital Photography 37 June 30th 04 08:11 PM
New Leica digital back info.... Barney 35mm Photo Equipment 19 June 30th 04 12:45 AM
Digital Imaging vs. (Digital and Film) Photography Bob Monaghan Medium Format Photography Equipment 9 June 19th 04 05:48 PM
Which is better? digital cameras or older crappy cameras thatuse film? Michael Weinstein, M.D. In The Darkroom 13 January 24th 04 09:51 PM


All times are GMT +1. The time now is 08:20 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PhotoBanter.com.
The comments are property of their posters.