If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
RolandRB wrote:
I have a couple of Retina Reflex IIIs with slow shutter blades (true of almos all of them). Are the blades sticky or the slow speeds? If the blades are sticky, I remove the lens cells and carefully clean them with "lens cleaning fluid" I bought in generic form from the camera store using a q-tip. You might have to flood the blades with fuild, them wipe off the excess after working the shutter. Never had one that didn't come around doing this. Do -not- use any lube on the shutter blades, they are suposed to be dry. I don't like the flooding the whole shutter deal as it washes out -all- the lubrication in the shutter. -- Stacey |
#12
|
|||
|
|||
Is gummed shutter blades the sole cause of distorted shutter speeds? Do the
springs ever give out? I never leave my shutters cocked when I'm finished with them. I know that is important. But do the springs still loose life after enough useage? Ivan "Stacey" wrote in message ... RolandRB wrote: I have a couple of Retina Reflex IIIs with slow shutter blades (true of almos all of them). Are the blades sticky or the slow speeds? If the blades are sticky, I remove the lens cells and carefully clean them with "lens cleaning fluid" I bought in generic form from the camera store using a q-tip. You might have to flood the blades with fuild, them wipe off the excess after working the shutter. Never had one that didn't come around doing this. Do -not- use any lube on the shutter blades, they are suposed to be dry. I don't like the flooding the whole shutter deal as it washes out -all- the lubrication in the shutter. -- Stacey |
#13
|
|||
|
|||
Is gummed shutter blades the sole cause of distorted shutter speeds? Do the
springs ever give out? I never leave my shutters cocked when I'm finished with them. I know that is important. But do the springs still loose life after enough useage? Ivan "Stacey" wrote in message ... RolandRB wrote: I have a couple of Retina Reflex IIIs with slow shutter blades (true of almos all of them). Are the blades sticky or the slow speeds? If the blades are sticky, I remove the lens cells and carefully clean them with "lens cleaning fluid" I bought in generic form from the camera store using a q-tip. You might have to flood the blades with fuild, them wipe off the excess after working the shutter. Never had one that didn't come around doing this. Do -not- use any lube on the shutter blades, they are suposed to be dry. I don't like the flooding the whole shutter deal as it washes out -all- the lubrication in the shutter. -- Stacey |
#14
|
|||
|
|||
Ivan wrote:
Is gummed shutter blades the sole cause of distorted shutter speeds? Do the springs ever give out? I never leave my shutters cocked when I'm finished with them. I know that is important. But do the springs still loose life after enough useage? I've never had to replace any parts to fix any of my old shutters. They all came around with cleaning either the blades and clean and lube of the gear train. As far as leaving them cocked, a well designed spring mechanism isn't going to be damaged by leaving the spring in a compressed state. "Distorted speeds" can be caused by either the timing mechinsim or sticky blades. It's not hard to tell which it is by watching the shutter operate. -- Stacey |
#15
|
|||
|
|||
Ivan wrote:
Is gummed shutter blades the sole cause of distorted shutter speeds? Do the springs ever give out? I never leave my shutters cocked when I'm finished with them. I know that is important. But do the springs still loose life after enough useage? I've never had to replace any parts to fix any of my old shutters. They all came around with cleaning either the blades and clean and lube of the gear train. As far as leaving them cocked, a well designed spring mechanism isn't going to be damaged by leaving the spring in a compressed state. "Distorted speeds" can be caused by either the timing mechinsim or sticky blades. It's not hard to tell which it is by watching the shutter operate. -- Stacey |
#16
|
|||
|
|||
|
#17
|
|||
|
|||
|
#18
|
|||
|
|||
|
#19
|
|||
|
|||
Lassi Hippeläinen wrote in message ...
RolandRB wrote: I have a couple of Retina Reflex IIIs with slow shutter blades (true of almos all of them). Since most lenses with leaf shutters are MF lenses, is there some long-lasting trick to make them come back to life, such as using very fine graphite powder, or do I have to bite the bullet and pay for a full shutter service from those competent to service Compur shutters? Perhaps there are some current or ex-camera repair people here who have worked on Compur leaf shutters who can answer my question. Rick Oleson has useful notes about Compurs: http://rick_oleson.tripod.com/leaf_shutter_cla.htm http://rick_oleson.tripod.com/index-55.html http://rick_oleson.tripod.com/index-88.html Actually he has good notes on many other things as well: http://rick_oleson.tripod.com/index-27.html -- Lassi Those links didn't work when I tried them. |
#20
|
|||
|
|||
Lassi Hippeläinen wrote in message ...
RolandRB wrote: I have a couple of Retina Reflex IIIs with slow shutter blades (true of almos all of them). Since most lenses with leaf shutters are MF lenses, is there some long-lasting trick to make them come back to life, such as using very fine graphite powder, or do I have to bite the bullet and pay for a full shutter service from those competent to service Compur shutters? Perhaps there are some current or ex-camera repair people here who have worked on Compur leaf shutters who can answer my question. Rick Oleson has useful notes about Compurs: http://rick_oleson.tripod.com/leaf_shutter_cla.htm http://rick_oleson.tripod.com/index-55.html http://rick_oleson.tripod.com/index-88.html Actually he has good notes on many other things as well: http://rick_oleson.tripod.com/index-27.html -- Lassi Those links didn't work when I tried them. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Mamiya Leaf Shutter | Robert C. | Medium Format Photography Equipment | 21 | July 16th 04 01:38 PM |
LUC shutter repair | Collin Brendemuehl | Large Format Photography Equipment | 1 | June 24th 04 05:49 PM |
Name of photographer who used slow slit shutter? | Daniel Kelly \(AKA Jack\) | Other Photographic Equipment | 12 | April 10th 04 05:08 AM |
Name of photographer who used slow slit shutter? | Daniel Kelly \(AKA Jack\) | General Photography Techniques | 6 | April 6th 04 01:55 PM |
Shutter repair | Serge Korolev | Large Format Photography Equipment | 25 | March 27th 04 03:12 PM |