If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
help needed
"Jim Bianchi" wrote in message ... snip Well I finally gave it a try after someone gave me a .pdf file 'splaining it. It was on orphancameras.com all right. (I just needed a good kick inna hiney to actually look for it.) Anyway, the process is smiple and straightforward. Never really having dealt w/polaroid camera's very much, when I opened the back and saw alla these rollers and doors, I tho't I'd have to thread the polaroid film thru them and such. No such thing was needed tho. The polaroidish film pack just snaps right in. All that's needed is care to ensure the various 'pull tabs' are not fouled or folded under. Orphancameras.com can be a very helpful resource for older or off-beat photo gear. The reason for the doors, of course is to keep light out while allowing the pull-tab to stick out, and the photo to be pulled out. The reason for the rollers is more important: There is a "pod" of chemical that developes the negative and transfers the image to the positive paper. The rollers break open the pod and spread the chemical between the neg and positive. If the image has regularly spaced spots on it, a piece of something has stuck to a roller. If the long edges or trailing edge of the picture is not fully developed, the rollers are not applying sufficient pressure and the chemical is not being spread the full width/length of the picture. Sometimes the chemical will leak out around the edges, and deposit on the roller(s). When it dries, it causes a bump on the roller(s) that causes the regualerly spaced spots. The chemical reaction that developes the picture is temperature sensitive, like many chemical reactions. In cold temperatures, a longer developing time may be required, or you could put the picture 'sandwich' someplace warm to develope. Early Polaroid instructions suggested putting it under your arm, and included a metal holder for warming. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Help needed, pls | jazu | Digital SLR Cameras | 11 | August 27th 09 11:09 PM |
Help needed | Boring | Photographing Nature | 0 | June 12th 07 12:22 PM |
Help needed | Boring | Digital ZLR Cameras | 0 | June 12th 07 12:21 PM |
EVF - is 115,000 enough? Or is 205,000-230,000 really what is needed? | Paul D. Sullivan | Digital Photography | 89 | May 30th 07 04:24 AM |
Needed | ColynG© | 35mm Equipment for Sale | 0 | January 30th 05 12:52 AM |