A Photography forum. PhotoBanter.com

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PhotoBanter.com forum » Digital Photography » Digital Photography
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Westcott Digital Calibration Target



 
 
Thread Tools Display Modes
  #1  
Old February 27th 05, 08:27 PM
Mooda
external usenet poster
 
Posts: n/a
Default Westcott Digital Calibration Target

Can anyone tell me how to use the Westcott Digital Calibration Target to set
white balance? I got one, but without instructions. On the Westcott
website there's a page for instructions but all the links are broken.

The target is advertised as providing exposure calibration, but I've heard
that it can also be used to set white balance for high key shotos. Can
anyone share information about that?


  #2  
Old February 27th 05, 08:48 PM
Crownfield
external usenet poster
 
Posts: n/a
Default

Mooda wrote:

Can anyone tell me how to use the Westcott Digital Calibration Target to set
white balance? I got one, but without instructions. On the Westcott
website there's a page for instructions but all the links are broken.

The target is advertised as providing exposure calibration, but I've heard
that it can also be used to set white balance for high key shotos. Can
anyone share information about that?


what is white balance, and how do we get it?

it is color balancing a camera, or image
so that the white in the subject is white in the image.

we point the camera at a gray or white object,
and set color balance.

ow we just set the proper balance in the camera, like daylight,
and then use our photo software to correct the resulting image
to perfection, using a gray or white part of the picture.
white shirts or cloudy skies work perfectly.
  #3  
Old February 27th 05, 08:48 PM
Crownfield
external usenet poster
 
Posts: n/a
Default

Mooda wrote:

Can anyone tell me how to use the Westcott Digital Calibration Target to set
white balance? I got one, but without instructions. On the Westcott
website there's a page for instructions but all the links are broken.

The target is advertised as providing exposure calibration, but I've heard
that it can also be used to set white balance for high key shotos. Can
anyone share information about that?


what is white balance, and how do we get it?

it is color balancing a camera, or image
so that the white in the subject is white in the image.

we point the camera at a gray or white object,
and set color balance.

ow we just set the proper balance in the camera, like daylight,
and then use our photo software to correct the resulting image
to perfection, using a gray or white part of the picture.
white shirts or cloudy skies work perfectly.
  #4  
Old February 27th 05, 11:11 PM
Mooda
external usenet poster
 
Posts: n/a
Default


"Crownfield" wrote:
ow we just set the proper balance in the camera, like daylight,
and then use our photo software to correct the resulting image
to perfection, using a gray or white part of the picture.
white shirts or cloudy skies work perfectly.


Thanks, but I'm looking for information about using a Westcott Digital
Calibration Target to set correct white balance when shooting a high key
set.



The procedure you describe above is for color correction after you've shot a
scene using incorrect white balance. While that procedure can remove minor
unintended color tinges, it doesn't really restore white balance. For
example if you shoot a blue blouse on a white background using a digital
camera with an incorrect color temperature setting, the white background
won't come out looking quite white. If you then "correct" the white
background using the Curves tool in Photoshop, you unfortunately also change
the color of the blue blouse. If someone then buys a blouse based upon your
picture they will be disappointed to discover that the product color doesn't
match the pictured color.



A high key set is one in which the white background is deliberately
over-exposed to the extent that it becomes indiscernible in the photo. The
subject is lit separately, and correctly exposed. When shooting a high key
set with a digital camera, if you don't set the exposure and white balance
correctly, bands of grayish-blue or pinkish-red color appear in the digital
image. Correcting those bands without altering the exposure or white
balance of the subject can be difficult, often requiring matt work.



I've heard from several sources that the Westcott Digital Calibration Target
is very helpful in setting the correct exposure and color balance. But
there's some trick to it; it's not done in quite the same way as setting
white balance off an 18% gray card, from what I've heard.



Can someone who has used the Westcott Digital Calibration Target for high
key photography please explain the technique? Thank you in advance.


  #5  
Old February 27th 05, 11:19 PM
Rudy Benner
external usenet poster
 
Posts: n/a
Default


"Mooda" wrote in message
...
Can anyone tell me how to use the Westcott Digital Calibration Target to
set white balance? I got one, but without instructions. On the Westcott
website there's a page for instructions but all the links are broken.

The target is advertised as providing exposure calibration, but I've heard
that it can also be used to set white balance for high key shotos. Can
anyone share information about that?



The links look ok here.

http://www.fjwestcott.com/instructions/target.pdf downloads just fine for
me.



  #6  
Old February 28th 05, 02:36 AM
Crownfield
external usenet poster
 
Posts: n/a
Default

Mooda wrote:

"Crownfield" wrote:


my silly noise snipped..

Thanks, but I'm looking for information about using a Westcott Digital
Calibration Target to set correct white balance when shooting a high key
set.

A high key set is one in which the white background is deliberately
over-exposed to the extent that it becomes indiscernible in the photo. The
subject is lit separately, and correctly exposed. When shooting a high key
set with a digital camera, if you don't set the exposure and white balance
correctly, bands of grayish-blue or pinkish-red color appear in the digital
image. Correcting those bands without altering the exposure or white
balance of the subject can be difficult, often requiring matt work.

I've heard from several sources that the Westcott Digital Calibration Target
is very helpful in setting the correct exposure and color balance. But
there's some trick to it; it's not done in quite the same way as setting
white balance off an 18% gray card, from what I've heard.


the white balance, custom set in the camera should still hold, right?

then the only question is how much to lighten the background.
some experimentation, looking for 255's in the white,
should get you very close. I suspect those banding problems
will happen only in overexposure overloading the sensor.

I did search in both google and google groups, and found no joy.
searching for 'high key set' got more useful information.
http://www.tallyns.com/Photo_Tech_Tips/techtips.htm


also, have you considered a chroma key blue / green background?

shoot a relatively normal shot, strip the background in processing,
and then, with the digital sensor out of the way,
juggle the forground any way you want? lighting should be easy,
and the editor should show no band problems.

any changes in the forground will have no effect on the background.


Can someone who has used the Westcott Digital Calibration Target for high
key photography please explain the technique? Thank you in advance.

  #7  
Old February 28th 05, 02:36 AM
Crownfield
external usenet poster
 
Posts: n/a
Default

Mooda wrote:

"Crownfield" wrote:


my silly noise snipped..

Thanks, but I'm looking for information about using a Westcott Digital
Calibration Target to set correct white balance when shooting a high key
set.

A high key set is one in which the white background is deliberately
over-exposed to the extent that it becomes indiscernible in the photo. The
subject is lit separately, and correctly exposed. When shooting a high key
set with a digital camera, if you don't set the exposure and white balance
correctly, bands of grayish-blue or pinkish-red color appear in the digital
image. Correcting those bands without altering the exposure or white
balance of the subject can be difficult, often requiring matt work.

I've heard from several sources that the Westcott Digital Calibration Target
is very helpful in setting the correct exposure and color balance. But
there's some trick to it; it's not done in quite the same way as setting
white balance off an 18% gray card, from what I've heard.


the white balance, custom set in the camera should still hold, right?

then the only question is how much to lighten the background.
some experimentation, looking for 255's in the white,
should get you very close. I suspect those banding problems
will happen only in overexposure overloading the sensor.

I did search in both google and google groups, and found no joy.
searching for 'high key set' got more useful information.
http://www.tallyns.com/Photo_Tech_Tips/techtips.htm


also, have you considered a chroma key blue / green background?

shoot a relatively normal shot, strip the background in processing,
and then, with the digital sensor out of the way,
juggle the forground any way you want? lighting should be easy,
and the editor should show no band problems.

any changes in the forground will have no effect on the background.


Can someone who has used the Westcott Digital Calibration Target for high
key photography please explain the technique? Thank you in advance.

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
How should I permanently store digital photographs? Bill Hilton Digital Photography 182 January 3rd 05 04:21 PM
NYT article - GPS tagging of digital photos Alan Browne Digital Photography 4 December 22nd 04 08:36 AM
Why digital is not photographic Tom Phillips In The Darkroom 35 October 16th 04 08:16 PM
Which is better? digital cameras or older crappy cameras thatuse film? Michael Weinstein, M.D. In The Darkroom 13 January 24th 04 10:51 PM
Lost Your Digital Pictures? Recover Them - Are you a professional photographer w corrupt digital images, an end user with missing photos? eProvided.com Digital Photo Equipment For Sale 0 September 5th 03 06:47 PM


All times are GMT +1. The time now is 03:50 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PhotoBanter.com.
The comments are property of their posters.