If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
fourier plug-in for gimp
having troubling with make and make install of the fourier transform
plug-in for gimp http://chidge.net/?m=stuff&o=howtos&p=fft supposed to do forward and reverse the make error I get is make: Nothing to be done for `all'. if I (make install) after the make error, there is no error and it creates a binary, but the filers don't show up under filters/generic like the website above says the binary is call fourier, if I try to run it I get the error bash: ./fourier: cannot execute binary file: Exec format error there is something other things called --install-bin and gimptool-2.0, but if I try to execute them, there are errors do I have to move the binary somewhere? I think I have all the libraries, there are no errors that libraries are needed I am using this version of Ubuntu Linux Distributor ID: Ubuntu Description: Ubuntu 14.04.1 LTS Release: 14.04 Codename: trusty and GIMP 2.8.10 I'll be googling around in the mean time... -- Dale |
#2
|
|||
|
|||
fourier plug-in for gimp
On Wed, 22 Oct 2014 16:44:33 -0400, Dale wrote:
having troubling with make and make install of the fourier transform plug-in for gimp http://chidge.net/?m=stuff&o=howtos&p=fft supposed to do forward and reverse the make error I get is make: Nothing to be done for `all'. if I (make install) after the make error, there is no error and it creates a binary, but the filers don't show up under filters/generic like the website above says the binary is call fourier, if I try to run it I get the error bash: ./fourier: cannot execute binary file: Exec format error there is something other things called --install-bin and gimptool-2.0, but if I try to execute them, there are errors do I have to move the binary somewhere? I think I have all the libraries, there are no errors that libraries are needed I am using this version of Ubuntu Linux Distributor ID: Ubuntu Description: Ubuntu 14.04.1 LTS Release: 14.04 Codename: trusty and GIMP 2.8.10 I'll be googling around in the mean time... Have you tried he http://gmic.sourceforge.net/gimp.shtml |
#3
|
|||
|
|||
Also:
On 10/22/2014 07:41 PM, philo wrote:
You should really ask on the Ubuntu group there are folks there who know considerably more than I do I asked on Ubuntu, someone suggested to run, make clean, first then I had to run the command that "make install" put out fourier-0.4.3$ cp fourier /home/dale/.gimp-2.8/plug-ins it works but the background looks around 50%, if I enlarge it I can see some of the image the reverse works too I'm working off these tutorials http://www.cs.unm.edu/~brayer/vision/fourier.html http://homepages.inf.ed.ac.uk/rbf/HIPR2/fourier.htm http://people.via.ecp.fr/~remi/soft/...n.php3#fourier the last link has a Yuv transform from RGB, it installed right the same way, know it is an approximation depending on what RGB, good enough for me, for now -- Dale |
#4
|
|||
|
|||
fourier plug-in for gimp
On 10/22/2014 08:40 PM, ray carter wrote:
On Wed, 22 Oct 2014 16:44:33 -0400, Dale wrote: having troubling with make and make install of the fourier transform plug-in for gimp http://chidge.net/?m=stuff&o=howtos&p=fft supposed to do forward and reverse the make error I get is make: Nothing to be done for `all'. if I (make install) after the make error, there is no error and it creates a binary, but the filers don't show up under filters/generic like the website above says the binary is call fourier, if I try to run it I get the error bash: ./fourier: cannot execute binary file: Exec format error there is something other things called --install-bin and gimptool-2.0, but if I try to execute them, there are errors do I have to move the binary somewhere? I think I have all the libraries, there are no errors that libraries are needed I am using this version of Ubuntu Linux Distributor ID: Ubuntu Description: Ubuntu 14.04.1 LTS Release: 14.04 Codename: trusty and GIMP 2.8.10 I'll be googling around in the mean time... Have you tried he http://gmic.sourceforge.net/gimp.shtml I asked on Ubuntu, someone suggested to run, make clean, first then I had to run the command that "make install" put out fourier-0.4.3$ cp fourier /home/dale/.gimp-2.8/plug-ins it works but the background looks around 50%, if I enlarge it I can see some of the image the reverse works too I'm working off these tutorials http://www.cs.unm.edu/~brayer/vision/fourier.html http://homepages.inf.ed.ac.uk/rbf/HIPR2/fourier.htm http://people.via.ecp.fr/~remi/soft/...n.php3#fourier the last link has a Yuv transform from RGB, it installed right the same way, know it is an approximation depending on what RGB, good enough for me, for now -- Dale |
#5
|
|||
|
|||
fourier plug-in for gimp
On Wed, 22 Oct 2014 16:44:33 -0400, Dale wrote:
having troubling with make and make install of the fourier transform plug-in for gimp http://chidge.net/?m=stuff&o=howtos&p=fft supposed to do forward and reverse the make error I get is make: Nothing to be done for `all'. if I (make install) after the make error, there is no error and it creates a binary, but the filers don't show up under filters/generic like the website above says the binary is call fourier, if I try to run it I get the error bash: ./fourier: cannot execute binary file: Exec format error there is something other things called --install-bin and gimptool-2.0, but if I try to execute them, there are errors do I have to move the binary somewhere? I think I have all the libraries, there are no errors that libraries are needed I am using this version of Ubuntu Linux Distributor ID: Ubuntu Description: Ubuntu 14.04.1 LTS Release: 14.04 Codename: trusty and GIMP 2.8.10 I'll be googling around in the mean time... FWIW you should be able to accomplish that with the ImageMagick - convert command - there is an option for fft and one for ift (inverse fft). |
#6
|
|||
|
|||
fourier plug-in for gimp
On 10/23/2014 11:43 AM, ray carter wrote:
On Wed, 22 Oct 2014 16:44:33 -0400, Dale wrote: having troubling with make and make install of the fourier transform plug-in for gimp http://chidge.net/?m=stuff&o=howtos&p=fft supposed to do forward and reverse the make error I get is make: Nothing to be done for `all'. if I (make install) after the make error, there is no error and it creates a binary, but the filers don't show up under filters/generic like the website above says the binary is call fourier, if I try to run it I get the error bash: ./fourier: cannot execute binary file: Exec format error there is something other things called --install-bin and gimptool-2.0, but if I try to execute them, there are errors do I have to move the binary somewhere? I think I have all the libraries, there are no errors that libraries are needed I am using this version of Ubuntu Linux Distributor ID: Ubuntu Description: Ubuntu 14.04.1 LTS Release: 14.04 Codename: trusty and GIMP 2.8.10 I'll be googling around in the mean time... FWIW you should be able to accomplish that with the ImageMagick - convert command - there is an option for fft and one for ift (inverse fft). thanks, I'll have to learn ImageMagick -- Dale |
#7
|
|||
|
|||
fourier plug-in for gimp
On Thu, 23 Oct 2014 18:38:45 -0400, Dale wrote:
On 10/23/2014 11:43 AM, ray carter wrote: On Wed, 22 Oct 2014 16:44:33 -0400, Dale wrote: having troubling with make and make install of the fourier transform plug-in for gimp http://chidge.net/?m=stuff&o=howtos&p=fft supposed to do forward and reverse the make error I get is make: Nothing to be done for `all'. if I (make install) after the make error, there is no error and it creates a binary, but the filers don't show up under filters/generic like the website above says the binary is call fourier, if I try to run it I get the error bash: ./fourier: cannot execute binary file: Exec format error there is something other things called --install-bin and gimptool-2.0, but if I try to execute them, there are errors do I have to move the binary somewhere? I think I have all the libraries, there are no errors that libraries are needed I am using this version of Ubuntu Linux Distributor ID: Ubuntu Description: Ubuntu 14.04.1 LTS Release: 14.04 Codename: trusty and GIMP 2.8.10 I'll be googling around in the mean time... FWIW you should be able to accomplish that with the ImageMagick - convert command - there is an option for fft and one for ift (inverse fft). thanks, I'll have to learn ImageMagick Just install it and do 'man convert' - describes fft and ift and, I think, gives an example. |
#8
|
|||
|
|||
fourier plug-in for gimp
On 10/23/2014 11:43 AM, ray carter wrote:
FWIW you should be able to accomplish that with the ImageMagick - convert command - there is an option for fft and one for ift (inverse fft). thanks, got that one too figured out what was wrong with the gimp one -- Dale |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
GIMP | Mike -- Email Ignored | Digital SLR Cameras | 144 | September 13th 08 02:08 PM |
DC plug of DMW-AC1 | [email protected] | Digital Photography | 0 | February 22nd 06 10:44 AM |
Do I want The Gimp??? | royroy | Digital Photography | 52 | August 6th 04 04:44 AM |
The Gimp | Allodoxaphobia | Digital Photography | 14 | July 10th 04 06:59 AM |
help with the GIMP | Peter | Medium Format Photography Equipment | 5 | April 13th 04 12:28 AM |