A Photography forum. PhotoBanter.com

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PhotoBanter.com forum » General Photography » In The Darkroom
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

adapt M39 to M25?



 
 
Thread Tools Display Modes
  #11  
Old March 5th 04, 03:52 AM
Luigi de Guzman
external usenet poster
 
Posts: n/a
Default adapt M39 to M25?

On Thu, 4 Mar 2004 20:03:58 -0500, Nick Zentena
wrote:

Luigi de Guzman wrote:


I can't measure very exactly, but it's about 82mm in diameter, & it's
recessed a few mm.



If it's only recessed a little then it's not the one I'm thinking about.

Try this:


http://groups.google.ca/groups?hl=en...aol.com&rnum=3

Also try emailing Jobo in the US. They handle the smaller Durst enlargers.
I think from your description that the current boards should fit but better
to ask. If you go to the B&H website they have a picture of the Siriotub and
most of the other Durst boards. See if they look similar.


Thanks for the URL and the hint. I've just e-mailed JOBO USA, and am
awaiting an answer.

I'm sorely tempted just to get the appropriate lensboard, but I'd be
really annoyed if it happened just to be a few millimetres off...!

Oh well. I can always start putting pennies in a jar for a new 80mm
f/4 Componon-S. in M-25.

-Luigi



Nick


  #12  
Old March 5th 04, 03:27 PM
Mike King
external usenet poster
 
Posts: n/a
Default adapt M39 to M25?

Lapla is M601, M605 and (probably)M670 and M70

--
darkroommike

----------
"BertS" wrote in message
link.net...
jjs wrote:
In article , Luigi de Guzman
wrote:


I have a Durst M606 whose lensboards are treaded for M25 lenses; I
would like to be able to use a newer M39 lens on my enlarger.



Can you have a new board made? If it's just a flat board, then it's

stone
simple to drill a new hole.


Try http://www.cambridgeworld.com/durst_old.htm and search. That is where

I
got one for my M600.

If they have one listed send them an e-mail. The list you see if poorly
maintained and they may not have something listed in stock. On the other

hand
they may have something not listed.

You will need to ask for their stock number, not the Durst part number.

Cost should be around $25 + S&H.

I have a lens board that does not fit my M600, it is bigger. Measure

yours,
in millimeters and I will check if mine is for the M606. It is marked

"Durst
Lapla 39".

Unmunge my e-mail address and respond via e-mail. aasainz at ix period

netcom
period com.

Bert



  #13  
Old March 5th 04, 05:54 PM
Luigi de Guzman
external usenet poster
 
Posts: n/a
Default adapt M39 to M25?

On Fri, 5 Mar 2004 08:27:03 -0600, "Mike King"
wrote:

Lapla is M601, M605 and (probably)M670 and M70


Yes, but has anyone yet tried it on the M606???

If it should work, then I'm in business!

-Luigi

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 01:58 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PhotoBanter.com.
The comments are property of their posters.