If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Quantalog Macbeth Calibration Strip - from "[email protected]"
|
#2
|
|||
|
|||
Quantalog Macbeth Calibration Strip - from "[email protected]"
Valeria Dal Monte wrote:
I am looking for the calibration strip to calibrate an analogic Macbeth Quantalog Densitometer. The one I had had with the densitometer has been lost, and in any case, after a so long time, I was not sure about the real density of the test strip. If you get a step wedge (even the little T-14 one from Kodak), and assume the clear step is 0.06 and the others are all 0.15 greater, what you get will be good enough for all practical purposes (not for scientific publication). Alternatively, for more money, you could get a calibrated strip. Please reply to That's not how it is done here. If you post a question on the newsgroup, that is where you can expect to find the answer(s). -- .~. Jean-David Beyer Registered Linux User 85642. /V\ Registered Machine 73926. /( )\ Shrewsbury, New Jersey http://counter.li.org ^^-^^ 12:10pm up 21 days, 23:35, 3 users, load average: 2.17, 2.16, 2.10 |
#3
|
|||
|
|||
Quantalog Macbeth Calibration Strip - from "[email protected]"
These people were very helpful when I was gearing up my machine...
http://www.stouffer.net/Stoufferhome1.htm I just noticed that you are in Italy. I would guess these small items would be inexpensive to mail. On Wed, 28 Jan 2004 16:36:14 +0100, "Valeria Dal Monte" wrote: I am looking for the calibration strip to calibrate an analogic Macbeth Quantalog Densitometer. The one I had had with the densitometer has been lost, and in any case, after a so long time, I was not sure about the real density of the test strip. Please reply to |
Thread Tools | |
Display Modes | |
|
|