A Photography forum. PhotoBanter.com

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PhotoBanter.com forum » Photo Techniques » General Photography Techniques
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Fuji S602 Question



 
 
Thread Tools Display Modes
  #1  
Old February 25th 04, 04:45 PM
Tom
external usenet poster
 
Posts: n/a
Default Fuji S602 Question

Hi,

I have a Fuji S602Z camera and I was very happy with the speed of this
camera when taking photo of moving scenes (kids, sports, etc).
I say "I was" because some of my settings was changed by accident (cannot
imagine what) and now, after I take a photo, the dispaly is shutting down
and and starts only when I touch the shutter button, which make me lose a
lot of time. Is like while saving on the card the display is changing to off
and is not starting any more if I don't press the shutter so if I want to
frame the next photo I should press the shutter before.
Thanks in advance for any opinion or ideea...



  #2  
Old February 25th 04, 07:31 PM
Lucas Tam
external usenet poster
 
Posts: n/a
Default Fuji S602 Question

"Tom" wrote in news:2q3%b.78279
:

I say "I was" because some of my settings was changed by accident (cannot
imagine what) and now, after I take a photo, the dispaly is shutting down
and and starts only when I touch the shutter button, which make me lose a
lot of time.


Change to your Settings Menu, and under the Power-off menu item, change it
to a higher timeout.

--
Lucas Tam )
Please delete "REMOVE" from the e-mail address when replying.
http://members.ebay.com/aboutme/coolspot18/
  #3  
Old February 25th 04, 10:13 PM
Karl
external usenet poster
 
Posts: n/a
Default Fuji S602 Question

Sounds like you may be set to RAW for your file size. Check that
first. Otherwise, reset to factory defaults via the menu or by leaving
the batteries out overnight.

-=[k]=-

On Wed, 25 Feb 2004 15:45:02 GMT, "Tom"
wrote:

Hi,

I have a Fuji S602Z camera and I was very happy with the speed of this
camera when taking photo of moving scenes (kids, sports, etc).
I say "I was" because some of my settings was changed by accident (cannot
imagine what) and now, after I take a photo, the dispaly is shutting down
and and starts only when I touch the shutter button, which make me lose a
lot of time. Is like while saving on the card the display is changing to off
and is not starting any more if I don't press the shutter so if I want to
frame the next photo I should press the shutter before.
Thanks in advance for any opinion or ideea...



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Info on Fuji 300mm F/5.6 L lens... Mark Baylin Large Format Photography Equipment 5 June 27th 04 06:31 PM
question about cross-processing the letter K Film & Labs 3 February 5th 04 12:03 AM
Where to have Fuji Superia X-Tra 800 developed Greg Lovern Film & Labs 2 November 17th 03 03:10 PM
Fuji Finepix S602Z Service Manual JAr Other Photographic Equipment 0 November 15th 03 03:00 PM
Kodak and Fuji...Old Film Frank Pittel Film & Labs 0 September 29th 03 07:01 AM


All times are GMT +1. The time now is 04:45 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PhotoBanter.com.
The comments are property of their posters.