If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Darkroom Sink OK to Fiberglass over Primer, +Paint or Bare Wood?
Sink's built. I'm about to line it with fiberglass cloth and two-part epoxy
resin. I built the box with 3/4" G1S Fir plywood. (an 8' X 28" sink in case you're wondering, as per "Building Your Darkroom" Lista Duren & Will McDonald, 1990). Duren's book doesn't have any info on using fiberglass however. If I go fiberglass resin w/cloth on bare wood there should be no problem right? Or should I prime the whole thing with oil base primer with/or without oil-based paint? If I do paint it will I be able to see the color through the fiberglass? Can Fiberglass resin be top-coated with paint? Thx. And thanks to all those who gave me practical advice on the colour of the darkroom question too. Many good points. Incidentally Orange is the best colour to wear with Dektol. Orange is the new Black this year. |
Thread Tools | |
Display Modes | |
|
|