If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Rochester Optical Company Universal view camera, cont'd.
In our last episode I was trying to figure out what kind of film holders
would fit my newly-restored Rochester Optical Co. "Universal" camera. I was operating under the assumption that it was a 5x7 camera. It isn't. I know that for sure because today I the film holder I ordered from Pacific Rim Camera arrived, and it doesn't fit. Too small, in both dimensions. (The holder was actually a plate holder, with film sheaths included, and was actually probably made for the Premo, not the Universal, but in any case is the wrong size.) So now I'm back to trying to figure out what the hell *size* my camera is. Here are the dimensions again: Film holder opening (exposure area): 5-1/8" x 7-15/16" Film holder outside dimensions: 5-11/16" x 9" Ground glass size: 5" x 8" Ground glass viewable area: 4-3/4" x 7-3/4" So does anyone here have any idea what size this camera is? If not, any suggestions where to ask? I'm trying to find something like a ROC society or something, but no luck yet. I'm also in touch with an antique camera person (Rob Nierdeman) who seems pretty knowledgable. -- Save the Planet Kill Yourself - motto of the Church of Euthanasia (http://www.churchofeuthanasia.org/) |
#2
|
|||
|
|||
Rochester Optical Company Universal view camera, cont'd.
David, if all else fails you can probably find a 5x7 back and adapt it
to the existing camera. |
#3
|
|||
|
|||
Rochester Optical Company Universal view camera, cont'd.
On 4/7/2009 6:22 PM John J spake thus:
David, if all else fails you can probably find a 5x7 back and adapt it to the existing camera. .... or have one made ($$$), or even make one myself--not rocket surgery. (Basically a flat wooden frame with locating pins, and a ground-glass picture frame with a spring.) Only critical dimension is ground glass-to-contact surface distance. -- Save the Planet Kill Yourself - motto of the Church of Euthanasia (http://www.churchofeuthanasia.org/) |
#4
|
|||
|
|||
Rochester Optical Company Universal view camera, cont'd.
And with a modicum of woodworking skills, e.g. not cutting appendages off when working,
you can get well within the needed accuracy. erie David Nebenzahl wrote: On 4/7/2009 6:22 PM John J spake thus: David, if all else fails you can probably find a 5x7 back and adapt it to the existing camera. ... or have one made ($$$), or even make one myself--not rocket surgery. (Basically a flat wooden frame with locating pins, and a ground-glass picture frame with a spring.) Only critical dimension is ground glass-to-contact surface distance. |
#5
|
|||
|
|||
Rochester Optical Company Universal view camera, cont'd.
On 4/14/2009 12:23 PM RJM spake thus:
The Century Universal was offered in the followimng sizes: 3.25x4.25; 4x5; 4.25x6.5; 5x7; 5x8; 6.5-8.5; 8x10; 10x12; 11x14; 14x17; 17x20 Thanks. I finally discovered that information on my own as well. I think the obvious answer is that you have a 5x8 camera. Especially since that is the size of your ground glass. I'm not sure that 5x8 film holders were ever made. If they were, I haven't seen them. I have 2 5x8 glass plate holders in my "collection". I have made film sheaths from brass plate stock for other odd size plate holders. I think I used 15 mil brass. Sometimes you can watch on Ebay and finally come up with the right size film sheaths so you can use film in glass plate holders. My current plan is to make a new back that will accept standard 5x7 film holders, which will at least let me use a standard, non-weird size of film. We'll see how that goes. -- Save the Planet Kill Yourself - motto of the Church of Euthanasia (http://www.churchofeuthanasia.org/) |
#6
|
|||
|
|||
Rochester Optical Company Universal view camera, cont'd.
On 4/14/2009 12:37 PM RJM spake thus:
Oh, I forgot to include the URL for the rochester Optical Company Universal info: http://www.fiberq.com/cam/roc/univ.htm There are also these pages: http://www.antiquewoodcameras.com/univ1.htm http://www.historiccamera.com/cgi-bi...ogin=universal http://www.dtristramludwig.com/collection.html (scroll about 1/3 down; why the guy puts his pages in PDFs is beyond me) as well as Rudolf Kingslake's history of R.O.C: http://www.nwmangum.com/Kodak/Roches...ical%20Company -- Save the Planet Kill Yourself - motto of the Church of Euthanasia (http://www.churchofeuthanasia.org/) |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Camera dimension confusion (Rochester Universal 5x7) | David Nebenzahl | Large Format Photography Equipment | 14 | March 31st 09 02:46 AM |
Optical view finding on a P&S | [email protected] | Digital Point & Shoot Cameras | 1 | August 14th 07 09:19 PM |
Old Rochester plate cameras and B&L Shutter | Neil Purling | Large Format Photography Equipment | 8 | February 2nd 07 01:08 PM |
Battery question before I tear a new one into a camera company. | pauly | Digital Photography | 7 | May 17th 06 11:33 PM |
FA: Mount many lenses on your view camera with this Universal Iris device | Hugh Lyon-Sach | Large Format Equipment For Sale | 0 | May 9th 05 07:44 PM |