If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
In article ,
"Malcolm Stewart" writes: And that was my point as I was specifying them for military equipment many, many years ago. Without thinking about it, I'd simply assumed that our (more expensive) modern gadgets used multi-layer boards, but for Pentax to make an issue of it (for the *st DS) may suggest that they know otherwise. Perhaps flexible multilayer boards are more difficult? Double sided fleximble boards are not new. Maybe, as you postulate, multilayer flexible ones are a new advance. -- http://www.petezilla.co.uk |
#12
|
|||
|
|||
"Brian C. Baird" wrote in message
.. . In article , "Bandicoot" says... "Switch" - absolutely not. Film is still so much higher quality and is what my market demands. You'll come to the dark side soon enough, Luke. NO! You are not my father... Though once the market wants mostly digital, obviously I'll need to switch. I'm thinking about a digital back for my MF SLR within the next year or so, just don't like the prices - but that currently would only be for a few markets, and most of the time I'd be shooting on film and then using the digital back to take a digital capture as well. Most of my 'digital customers' currently want big files that are better produced by scanning film anyway. But that said, I'll probably be buying one, just not "switching" in the sense of using it instead of film. It'll be a great teaching tool, and good for images for the web. Not to mention all the pictures Sharon always wants me to take of her with this group of friends, with that group of friends, with the dogs, with... Yes. Digital is great for things you want to take a bazillion pictures of, but don't really want to pay the developing on. Yeah, I can see quite a lot of non-work photography being digital. But then, anytime I take a landscape that others would take for pleasure, for me it is (at least potentially) work, but these are the types of shot I would still prefer film for even if I was an amateur. Peter |
#13
|
|||
|
|||
"Brian C. Baird" wrote in message
.. . In article , "Bandicoot" says... "Switch" - absolutely not. Film is still so much higher quality and is what my market demands. You'll come to the dark side soon enough, Luke. NO! You are not my father... Though once the market wants mostly digital, obviously I'll need to switch. I'm thinking about a digital back for my MF SLR within the next year or so, just don't like the prices - but that currently would only be for a few markets, and most of the time I'd be shooting on film and then using the digital back to take a digital capture as well. Most of my 'digital customers' currently want big files that are better produced by scanning film anyway. But that said, I'll probably be buying one, just not "switching" in the sense of using it instead of film. It'll be a great teaching tool, and good for images for the web. Not to mention all the pictures Sharon always wants me to take of her with this group of friends, with that group of friends, with the dogs, with... Yes. Digital is great for things you want to take a bazillion pictures of, but don't really want to pay the developing on. Yeah, I can see quite a lot of non-work photography being digital. But then, anytime I take a landscape that others would take for pleasure, for me it is (at least potentially) work, but these are the types of shot I would still prefer film for even if I was an amateur. Peter |
#14
|
|||
|
|||
Malcolm Stewart wrote:
"Alan Browne" wrote in message .. . http://www.dpreview.com/news/0409/04...entaxistds.asp ... and I note that they make a feature of using multi-layer boards. Does this indicate that other digicams don't use them? It also claims to have a viewfinder... by your logic perhaps the others don't? (FWIW I can't find what you're referring to). -- -- rec.photo.equipment.35mm user resource: -- http://www.aliasimages.com/rpe35mmur.htm -- e-meil: there's no such thing as a FreeLunch.-- |
#15
|
|||
|
|||
"Alan Browne" wrote in message
.. . Malcolm Stewart wrote: "Alan Browne" wrote in message .. . http://www.dpreview.com/news/0409/04...entaxistds.asp ... and I note that they make a feature of using multi-layer boards. Does this indicate that other digicams don't use them? It also claims to have a viewfinder... by your logic perhaps the others don't? Point taken g (FWIW I can't find what you're referring to). It's under the Press Release section "Major Features 1 Compact, go-anywhere design" snipped "high-rigidity stainless-steel chassis, multi-layered electronic circuit boards and high-density" -- M Stewart Milton Keynes, UK http://www.megalith.freeserve.co.uk\oddimage.htm |
#16
|
|||
|
|||
"Alan Browne" wrote in message
.. . Malcolm Stewart wrote: "Alan Browne" wrote in message .. . http://www.dpreview.com/news/0409/04...entaxistds.asp ... and I note that they make a feature of using multi-layer boards. Does this indicate that other digicams don't use them? It also claims to have a viewfinder... by your logic perhaps the others don't? Point taken g (FWIW I can't find what you're referring to). It's under the Press Release section "Major Features 1 Compact, go-anywhere design" snipped "high-rigidity stainless-steel chassis, multi-layered electronic circuit boards and high-density" -- M Stewart Milton Keynes, UK http://www.megalith.freeserve.co.uk\oddimage.htm |
#17
|
|||
|
|||
Malcolm Stewart wrote:
r the Press Release section "Major Features 1 Compact, go-anywhere design" snipped "high-rigidity stainless-steel chassis, multi-layered electronic circuit boards and high-density" In the context of that paragraph, which is about how compact the system is, they enumerating the many design factors that allow the compactness. Referring to multi layer boards is not very sophisticated, but as a part of a list, acceptable. As another poster pointed, if the multilayering is part of a flexible assembly then extra kudos. Cheers, Alan -- -- rec.photo.equipment.35mm user resource: -- http://www.aliasimages.com/rpe35mmur.htm -- e-meil: there's no such thing as a FreeLunch.-- |
#18
|
|||
|
|||
Malcolm Stewart wrote:
r the Press Release section "Major Features 1 Compact, go-anywhere design" snipped "high-rigidity stainless-steel chassis, multi-layered electronic circuit boards and high-density" In the context of that paragraph, which is about how compact the system is, they enumerating the many design factors that allow the compactness. Referring to multi layer boards is not very sophisticated, but as a part of a list, acceptable. As another poster pointed, if the multilayering is part of a flexible assembly then extra kudos. Cheers, Alan -- -- rec.photo.equipment.35mm user resource: -- http://www.aliasimages.com/rpe35mmur.htm -- e-meil: there's no such thing as a FreeLunch.-- |
#19
|
|||
|
|||
Bandicoot wrote:
. . . . . . . . . . . . . . . Though once the market wants mostly digital, obviously I'll need to switch. I have rented some high end digital because some clients thought it would be better. Those were mostly medium format digital backs, which one could assume to be the highest quality in direct digital. Comparing some final scanned film images, the few clients whom have requested this type of work, thought the scanned 35 mm was slightly better. With the scanned medium format, they were then convinced that the scanned medium format film was the ultimate. I have never had a repeat client that requested direct digital imaging more than once. At the end of any assignment, they get a CD-R of images, so largely it really does not matter to them how the images were captured. I'm thinking about a digital back for my MF SLR within the next year or so, just don't like the prices - but that currently would only be for a few markets, and most of the time I'd be shooting on film and then using the digital back to take a digital capture as well. You might be surprised that some of the earlier Medium Format digital backs are going for near $2000 on EBAY. There are not many of them, but they are starting to appear more often. The colour quality and lower noise are benefits, even with slightly older technology. Most are the 37 mm by 37 mm square chips, so quite a crop from the full film frame size. Most of my 'digital customers' currently want big files that are better produced by scanning film anyway. Funny you mention film sizes. That is what has developed from discussions with clients. When they find out that I can give them files so big that only three or four fit on a CD-R, they often realize that scanned film is still high quality. I think the basic idea is that they do not want to give up any possible quality advantage, which was the point of them hiring a professional photographer. But that said, I'll probably be buying one, just not "switching" in the sense of using it instead of film. It'll be a great teaching tool, and good for images for the web. Not to mention all the pictures Sharon always wants me to take of her with this group of friends, with that group of friends, with the dogs, with... Yes. Digital is great for things you want to take a bazillion pictures of, but don't really want to pay the developing on. Yeah, I can see quite a lot of non-work photography being digital. But then, anytime I take a landscape that others would take for pleasure, for me it is (at least potentially) work, but these are the types of shot I would still prefer film for even if I was an amateur. Also that there is no real equivalent for panorama images from an Xpan, 612, or 617 camera, in the world of digital. I would be surprised if any company ever makes a true (not cropped) panorama digital that is not a scanning (rotating?) camera. The other huge issue is that an RGB sensor just cannot capture all possible colours. While films cannot capture all of them either, there are ways to choose a bias in one direction or another. Also, there are colours approaching some green, pure red, pure yellow, or especially cyan, that can be captured on film, but all Bayer pattern digital chips struggle to capture. Compounding this problem, is that most of these colour ranges don't display accurately, or at all, on a computer monitor. Having that piece of film with the proper colour really helps get the final printed item looking like it should. Ciao! Gordon Moat A G Studio http://www.allgstudio.com/gallery.html Updated! |
#20
|
|||
|
|||
Bandicoot wrote:
. . . . . . . . . . . . . . . Though once the market wants mostly digital, obviously I'll need to switch. I have rented some high end digital because some clients thought it would be better. Those were mostly medium format digital backs, which one could assume to be the highest quality in direct digital. Comparing some final scanned film images, the few clients whom have requested this type of work, thought the scanned 35 mm was slightly better. With the scanned medium format, they were then convinced that the scanned medium format film was the ultimate. I have never had a repeat client that requested direct digital imaging more than once. At the end of any assignment, they get a CD-R of images, so largely it really does not matter to them how the images were captured. I'm thinking about a digital back for my MF SLR within the next year or so, just don't like the prices - but that currently would only be for a few markets, and most of the time I'd be shooting on film and then using the digital back to take a digital capture as well. You might be surprised that some of the earlier Medium Format digital backs are going for near $2000 on EBAY. There are not many of them, but they are starting to appear more often. The colour quality and lower noise are benefits, even with slightly older technology. Most are the 37 mm by 37 mm square chips, so quite a crop from the full film frame size. Most of my 'digital customers' currently want big files that are better produced by scanning film anyway. Funny you mention film sizes. That is what has developed from discussions with clients. When they find out that I can give them files so big that only three or four fit on a CD-R, they often realize that scanned film is still high quality. I think the basic idea is that they do not want to give up any possible quality advantage, which was the point of them hiring a professional photographer. But that said, I'll probably be buying one, just not "switching" in the sense of using it instead of film. It'll be a great teaching tool, and good for images for the web. Not to mention all the pictures Sharon always wants me to take of her with this group of friends, with that group of friends, with the dogs, with... Yes. Digital is great for things you want to take a bazillion pictures of, but don't really want to pay the developing on. Yeah, I can see quite a lot of non-work photography being digital. But then, anytime I take a landscape that others would take for pleasure, for me it is (at least potentially) work, but these are the types of shot I would still prefer film for even if I was an amateur. Also that there is no real equivalent for panorama images from an Xpan, 612, or 617 camera, in the world of digital. I would be surprised if any company ever makes a true (not cropped) panorama digital that is not a scanning (rotating?) camera. The other huge issue is that an RGB sensor just cannot capture all possible colours. While films cannot capture all of them either, there are ways to choose a bias in one direction or another. Also, there are colours approaching some green, pure red, pure yellow, or especially cyan, that can be captured on film, but all Bayer pattern digital chips struggle to capture. Compounding this problem, is that most of these colour ranges don't display accurately, or at all, on a computer monitor. Having that piece of film with the proper colour really helps get the final printed item looking like it should. Ciao! Gordon Moat A G Studio http://www.allgstudio.com/gallery.html Updated! |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
*ist DS announced | Alan Browne | Digital Photography | 17 | September 15th 04 08:05 AM |
CANON dRebel2 / 300D2 Announced | Arthur L. Rubin | 35mm Photo Equipment | 3 | September 12th 04 05:54 AM |
300D Mark II | RTJ | Digital Photography | 69 | August 27th 04 10:57 PM |
FYI: Sanyo 2500mAh AA cells announced in Japan! | David Chien | Digital Photography | 1 | July 6th 04 11:19 PM |