If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Polaroid 545 backs and quickloads
I got with a used camera a Polaroid 545 back.
It included one Polapan sheet, so I used it to experiment with. Just to see how things work. Can the backs be used with regular Fuji or Kodak ready/quickloads? TIA, Collin |
#2
|
|||
|
|||
Can the backs be used with regular Fuji or Kodak
ready/quickloads? Yes in my experience. I consider the Polaroid holder to be the universal holder for pre-loaded films and Polaroid films as well. steve simmons |
#3
|
|||
|
|||
Can the backs be used with regular Fuji or Kodak
ready/quickloads? Yes in my experience. I consider the Polaroid holder to be the universal holder for pre-loaded films and Polaroid films as well. steve simmons |
#4
|
|||
|
|||
Collin Brendemuehl wrote:
: I got with a used camera a Polaroid 545 back. : It included one Polapan sheet, so I used it to experiment with. : Just to see how things work. : Can the backs be used with regular Fuji or Kodak ready/quickloads? Yes. -- Keep working millions on welfare depend on you ------------------- |
#5
|
|||
|
|||
Collin Brendemuehl wrote:
: I got with a used camera a Polaroid 545 back. : It included one Polapan sheet, so I used it to experiment with. : Just to see how things work. : Can the backs be used with regular Fuji or Kodak ready/quickloads? Yes. -- Keep working millions on welfare depend on you ------------------- |
#6
|
|||
|
|||
"Collin Brendemuehl" wrote in message
om... I got with a used camera a Polaroid 545 back. It included one Polapan sheet, so I used it to experiment with. Just to see how things work. Can the backs be used with regular Fuji or Kodak ready/quickloads? TIA, Collin There's a very good analysis of which loads work in which holders on the Robert White site: go to http://www.robertwhite.co.uk/Large%20accessories.htm and scroll about half way down the page. Basically they say that all three loads work in the 545i, but note that unlike Kodak's and Fuji's holders it doesn't have a pressure plate, so you lose the flatness advantage that readyload holders otherwise supposedly have. Peter |
Thread Tools | |
Display Modes | |
|
|