View Single Post
  #4  
Old April 16th 05, 12:43 AM
John Bartley
external usenet poster
 
Posts: n/a
Default

wrote:

john, ihave a commercial view [magnesium] with the extension bed.
the pad that goes under it to position it on the tripod andthe
auxiliary bellows arrangement that replaces the lensboard and has the
front tilt movements. a 5x7 reducing back and the8x10 back. the 8x10
back is warped and will not go on the camera. i've always meant to try
to fix it but never have..don't guaratee that it could be done. the
bellows is fine. with it i have a turner reich convertable 12 to 21 to
28 inches glass is perfect...the shutter is old and unknown but works
perfectly. i have some other info for you but i think i've run out of
room on this message . cheap cheap if you are interested let me know
frank ferreira


Thank you Frank,

I appreciate you responding, and I should have posted sooner that I was
no longer in the market.

I purchased this :

http://cgi.ebay.com/ws/eBayISAPI.dll...tem=7505156948

It is advertised as working, so hopefully it won't take too much to get
it out into the field.

Possibly someone else might wish to contact you about yours?

cheers and thank you again.

--
regards from ::

John Bartley
43 Norway Spruce Street
Stittsville, Ontario
Canada, K2S1P5

( If you slow down it takes longer
- does that apply to life also?)