The WestSystem Site has some top notch info. Many Thx.
"f/256" wrote in message
able.rogers.com...
"Nicholas O. Lindan" wrote in message
news
"SofaKing" wrote
Lots of information on the boat building sites. The 'standard' epoxy
is "West", their site has tons of info/tutorials/etc.:
http://www.westsystem.com/
I second the West System suggestion, I made my sink out of MDF, epoxy was
used to bond the MDF, fillets on the corners and then 3 coats of epoxy, I
didn't use fiberglass but with fiberglass it'd be even better. Their
epoxy
can be colored, they sell white and grey tints (black also I think), but
you
could use some other products, too. Click on "Epoxy Works Magazine" and
the
second last article is about a darkroom sink. Call them if you need, they
are very helpful.
Guillermo