PhotoBanter.com

PhotoBanter.com (http://www.photobanter.com/index.php)
-   Digital Photography (http://www.photobanter.com/forumdisplay.php?f=5)
-   -   How does the Nikon ML-L3 wireless remote work? (http://www.photobanter.com/showthread.php?t=74243)

Tom Hise December 16th 06 02:34 PM

How does the Nikon ML-L3 wireless remote work?
 
I'm curious about how the Nikon ML-L3 works. If there were two cameras,
side-by-side, would the remote trigger them both? If not, how does a
camera know if the remote is controlling it or the other camera? Does
anyone have any experience with this?

TIA

--
Tom Hise

Rudy Benner December 16th 06 02:37 PM

How does the Nikon ML-L3 wireless remote work?
 

"Tom Hise" wrote in message
...
I'm curious about how the Nikon ML-L3 works. If there were two cameras,
side-by-side, would the remote trigger them both? If not, how does a
camera know if the remote is controlling it or the other camera? Does
anyone have any experience with this?

TIA

--
Tom Hise


The address coding can be changed. See the manual.



Cynicor December 16th 06 02:54 PM

How does the Nikon ML-L3 wireless remote work?
 
Tom Hise wrote:
I'm curious about how the Nikon ML-L3 works. If there were two cameras,
side-by-side, would the remote trigger them both? If not, how does a
camera know if the remote is controlling it or the other camera? Does
anyone have any experience with this?


Are both cameras set to remote control mode? If so, I doubt you could
tell the difference. To do that, you should use something like a Pocket
Wizard set to two different channels on the two cameras.

Tim December 16th 06 03:11 PM

How does the Nikon ML-L3 wireless remote work?
 
I'm curious about how the Nikon ML-L3 works. If there were two
cameras, side-by-side, would the remote trigger them both? If not,
how does a camera know if the remote is controlling it or the other
camera? Does anyone have any experience with this?

TIA


Hi Tom



My basic understanding is this -



It's not camera specific so technically both cameras could trigger - hold
down the shooting mode button, turn the main command dial.



In reality you need to switch the cameras to remote shutter release
operation before they will accept the signal from the remote so one could be
set to fire and the other(s) not.



This I think gives you the option of setting up five cameras and firing them
all at the same time but have each set to a different delay 0, 2, 5, 10, 20
secs which might be useful to someone somewhere :-)



If I'm wrong I'm sure it won't be long till we find out :-)



Cheers



Tim



--
http://www.timdenning.myby.co.uk/




All times are GMT +1. The time now is 01:53 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
PhotoBanter.com