Olympus camera overexposes
 

Olympus FE-20
- - -
Are the pictures pale-looking even when you upload them to a computer?

Has the camera previously produced acceptable pictures?

Is the battery OK?

Could be a fault in the exposure meter or in the 'firmware'.

Wouldn't these faults be evident in the "viewfinder" mode (before taking the
exposure)? When I aim the camera at light and dark subjects the camera
compensates by "irising" up and down to give what looks to be a
properly-exposed "preview" display. Only when the image is captured is it
overexposed.

Images downloaded and viewed on the computer are overexposed, identical to
when viewed on the camera's display.

This is a new-to-me camera (used) so I don't know the history.

Battery icon is green (fully charged).

It doesn't matter whether flash is on or off.

Ideas?

Olympus camera overexposes
 

Wouldn't these faults be evident in the "viewfinder" mode (before
taking the exposure)? When I aim the camera at light and dark
subjects the camera compensates by "irising" up and down to
give what looks to be a properly-exposed "preview" display.
Only when the image is captured is it overexposed.

Images downloaded and viewed on the computer are overexposed,
identical to when viewed on the camera's display.

This isn't what I remember you saying. Regardless...

If the picture is consistently misexposed, then the exposure-compensation
control (assuming the camera has one) should fix the problem. If it doesn't,
then the camera needs repair or replacement.

As I said, this discrepancy is not uncommon.

Olympus camera overexposes
 

On 2010-01-21, DaveC wrote:
Olympus FE-20
- - -
Are the pictures pale-looking even when you upload them to a computer?

Has the camera previously produced acceptable pictures?

Is the battery OK?

Could be a fault in the exposure meter or in the 'firmware'.

Wouldn't these faults be evident in the "viewfinder" mode (before taking the
exposure)?

Not necessarily. In 'viewfinder' mode one set of 'firmware' routines
operates to put an image on the screen; in 'picture taking mode' a
different set of routines determines the 'exposure' settings and then
encodes the image for 'saving' to memory, probably doing some 'processing'
and then compressing the data to a JPEG file, for point-and-shoot cameras.
Then yet another set of routines comes into play when you look at the
saved image.

Any of those firmware routines can become corrupted, for example by
physical damage to the camera or exposure to electro-magnetic radiation
that's powerful enough to scramble the bits and bytes stored in the
micro-chips.

When I aim the camera at light and dark subjects the camera
compensates by "irising" up and down to give what looks to be a
properly-exposed "preview" display. Only when the image is captured is it
overexposed.

OK, so the firmware that processes compresses and saves the image, may
be faulty; or the firmware that calculates the exposure; or the hardware
exposure meter (if there is one, as such).

Images downloaded and viewed on the computer are overexposed, identical to
when viewed on the camera's display.

This is a new-to-me camera (used) so I don't know the history.

Battery icon is green (fully charged).

It doesn't matter whether flash is on or off.

Ideas?

You've got a duff one. A camera shop may be willing to 'look at it', but
don't hold your breath.

--
-- ^^^^^^^^^^
-- Whiskers
-- ~~~~~~~~~~

Olympus camera overexposes
 

If the picture is consistently misexposed, then the exposure-compensation
control (assuming the camera has one) should fix the problem.

Compensation doesn't fix the problem, it fixes the symptom. The problem
remains.

The compensation range on this camera is +/- 2 stops and this is not enough.

If it doesn't, then the camera needs repair or replacement.

I'm asking questions to find out what the cause is. Repair options to be
considered after this is determined.

Thanks.

Olympus camera overexposes
 

Any of those firmware routines can become corrupted,
for example by physical damage to the camera or exposure
to electro-magnetic radiation that's powerful enough to
scramble the bits and bytes stored in the micro-chips.

It doesn't work that way. And if it did, the firmware would likely fail
altogether.

Olympus camera overexposes
 

If the picture is consistently misexposed, then the exposure-compensation
control (assuming the camera has one) should fix the problem.

Compensation doesn't fix the problem, it fixes the symptom. The problem
remains.
The compensation range on this camera is +/- 2 stops and this is not
enough.

If it doesn't, then the camera needs repair or replacement.

I'm asking questions to find out what the cause is. Repair options to be
considered after this is determined.

If +/- 2 stops isn't enough to compensate, then the camera is either grossly
misdesigned, or it's defective. The "cause" is immaterial, as a properly
designed and operating camera should not show this problem (or symptom, as
you prefer).

Olympus camera overexposes
 

Does the camera have an exposure setting in addition to the +/- two F-
stops?

No.

Do you have the instruction manual??

Yes.

Olympus camera overexposes
 

Have you tried removing the battery for a couple of days and then
basiclly starting from scratch as far as settting up all the options,?

Yes.

Thanks.

Olympus camera overexposes
 

On Thu, 21 Jan 2010 12:40:34 -0800, DaveC wrote:

| If the picture is consistently misexposed, then the exposure-compensation
| control (assuming the camera has one) should fix the problem.
|
|Compensation doesn't fix the problem, it fixes the symptom. The problem
|remains.
|
|The compensation range on this camera is +/- 2 stops and this is not enough.
|


I had the same problem with all my Cokin Flashes, they had a -4 stop
problem, so I fixed the exposure meter with incremental chromatic layers of
black marker touches...

But a mere +/- 2 stop is a good range if you shoot negs (C41) rather
than Slides (E6)....

| If it doesn't, then the camera needs repair or replacement.
|

A big step, they might find other problems....the time spent can be
quite high, and the proper meter sensor too.

|I'm asking questions to find out what the cause is. Repair options to be
|considered after this is determined.

They might cost you a bit much these days...oh but wait, there are
camera repair schools where you are or mail-out?

Bob

Olympus camera overexposes
 

On Thu, 21 Jan 2010 13:48:21 -0800, DaveC wrote:

| Does the camera have an exposure setting in addition to the +/- two F-
| stops?
|
|No.

Can you fool the light sensor a few stops then...might cost you a
bit of film a few NOTES to compare after slide/neg development...

Bob