1. Have a couple of ceramic isolators loose in the CPE-2 tab. What glue/epoxy should I use to fix it? 2. What lube can I use to lubricate plastic gears of...

I was looking over some old files and spotted a note from Richard K about adding sodium acetate to make the stop bath non-swelling. Is there any advantage to...

Anyone know the correct development times for tri x 320 sheet in hc110? Or HP 5 400 in hc110 all tray...

Here is a question on the JOBO C-41 Press Kit. The directions say to use a water presoak before the developer, would that ruin the film? The Tetenal C-41 Press...

So, after Agfa vanishing from the planet, big yellow every now and then expunging one or another darkroom requisite from their catalog, others hanging down a...

I'd appreciate comments and experiences vis-a-vis choosing ammonium bisulfite vs Kodak HCA (sulfite/metabisulfite) type washing aids, especially as they act as...

Is there are a simple way to install a switch in CPE-2 to disable heater?

I will be moving aboard for a year for a new job, needless to say, I cannot pack my darkroom and enlarge with me. However I am investigating the possibility...

I mixed up a batch of Gevaert G.262 warm tone developer (DC #68) and I really like the results 1:1 with Ilford and Forte Warmtone. I'd like to add a touch more...

Got an old CPE-2 with Lift last week. It seems to be doing great job keeping chemicals @38C degrees as meassured in a bottle. However, when I measured...

http://home.tiscali.be/jant/2006.jpg don't worry if you don't understand dutch, it just means: "look forward to 2006 with a smile - that is my wish for...

I read a reference in an old magazine about solarizing a negative. I have knowledge about solarizing a print, but how is that done with a negative? Terry

Mike wrote: I came across someone with several Omega D2 enlargers. Some are fitted with cold lights, and I have the opportunity to just buy the cold...

I have two of these 50/3.5 Fujinon EP lenses: one has click stops, the other not. But I have discovered that the one without the click stops still has the...

The "flying saucer"? Not a bad little light. Omega claimed that the lamp was a custom job (I could find the part number but doubt you'll find the lamp unless...

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=7577296167&rd=1&sspagename=STRK%3AMESE%3AIT&rd=1

"Mike" wrote in message ... I came across someone with several Omega D2 enlargers. Some...

Mike wrote: I came across someone with several Omega D2 enlargers. Some are fitted with cold lights, and I have the opportunity to...

In article , Mike wrote: I came across someone with several Omega D2 enlargers. Some are...

I had a strange problem printing some film today that I've never experienced before in my years in the darkroom. I'm getting what looks to be some clouding in...